Heat Pumps

Thermino iPV uses an external heating source (e.g. a boiler) as a main source of heat, and surplus PV energy to provide an AC power supply, which is supplied to the electric heater inside the Heat Battery. This is a great way to add water storage and increase the self-consumption of a PV system. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. Only the Myenergi Eddi can be used as an immersion controller at present. The Thermino 300 iPV would typically be installed in a 4-5 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs:  Grid electricity - Secondary SourceBoiler - Primary SourceSolar Panels - Secondary SourceHeat Pump - Some high temp   General Specifications Product Code DKP-DBW-ATZ-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 284L Water available at 40°C 370L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating A+ Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

Thermino iPV uses an external heating source (e.g. a boiler) as a main source of heat, and surplus PV energy to provide an AC power supply, which is supplied to the electric heater inside the Heat Battery. This is a great way to add water storage and increase the self-consumption of a PV system. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. Only the Myenergi Eddican be used as an immersion controller at present. The Thermino 210 iPV would typically be installed in a 3 bedroom property.   Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs:  Grid electricity - Secondary SourceBoiler - Primary SourceSolar Panels - Secondary SourceHeat Pump - Some high temp   General Specifications Product Code DKP-DBW-ATZ-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 300 Weight in use 187kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32.1W Energy efficiency rating A+ Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

Thermino iPV (UniQ HW +iPV) uses an external heating source (e.g. a boiler) as a main source of heat, and surplus PV energy to provide an AC power supply, which is supplied to the electric heater inside the Heat Battery. This is a great way to add water storage and increase the self-consumption of a PV system. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. Only the Myenergi Eddi an be used as an immersion controller at present. The Thermino 150 iPV would typically be installed in a 1-2 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs:  Grid electricity - Secondary SourceBoiler - Primary SourceSolar Panels - Secondary SourceHeat Pump - Some high temp   General Specifications Product Code DKP-DBW-ATZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 142L Water available at 40°C 185L Weight in use 136kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28.1W Energy efficiency rating A+ Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

 Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 300 i would typically be installed in a 4-5 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp General Specifications Product Code DRP-CBW-AVZ-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 284L Water available at 40°C 370L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating A+ Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

  Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 210 i would typically be installed in a 3 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp General Specifications Product Code DNP-CBW-AVZ-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 300L Weight in use 187kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32.1W Energy efficiency rating A+ Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

  Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 150 i would typically be installed in a 1-2 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp General Specifications Product Code DKP-CBW-AVZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 142L Water available at 40°C 185L Weight in use 136kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28.1W Energy efficiency rating A+ Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

  Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 70 ePV would typically be installed in a studio apartment, or for off-grid applications in a caravan or boat. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp   General Specifications Product Code DGP-CBW-AVZ-1 Energy capacity 3.2kWh Equivalent hot water capacity 71L Water available at 40°C 85L Weight in use 79kg Height 440mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 20W Energy efficiency rating C Recommended flow rate 6LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

  Thermino ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 300 ePV would typically be installed in a 4-5 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump   General Specifications Product Code DRP-BAW-ATY-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 306L Water available at 40°C 436L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating C Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,701kWh/annum

Read more less

Thermino ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 210 e would typically be installed in a 3 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump General Specifications Product Code SNP-BAW-ATY-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 301L Weight in use 178kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32W Energy efficiency rating C Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,690kWh/annum  

Read more less

  Thermino ePV (UniQ eHW +iPV) - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 150 ePV would typically be installed in a 1-2 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump General Specifications Product Code SKP-BAW-ATZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 140L Water available at 40°C 199L Weight in use 139kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28.1W Energy efficiency rating C Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 1,398kWh/annum

Read more less

Thermino 70 ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 70 ePV would typically be installed in a studio apartment, or for off-grid applications in a caravan or boat. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump General Specifications Product Code SGP-BAW-ATZ-1 Energy capacity 3.2kWh Equivalent hot water capacity 74L Water available at 40°C 105L Weight in use 79kg Height 440mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 20W Energy efficiency rating C Recommended flow rate 6LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 542kWh/annum

Read more less

 Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 300 e would typically be installed in a 4-5 bedroom property.   Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications Product Code DRP-AAW-AVZ-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 306L Water available at 40°C 436L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating C Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,701kWh/annum

Read more less

  Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 210 e would typically be installed in a 3 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications - Product Code SNP-AAW-AVZ-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 301L Weight in use 178kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32W Energy efficiency rating C Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,690kWh/annum

Read more less

Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 150 e would typically be installed in a 1-2 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications Product Code SKP-AAW-AVZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 142L Water available at 40°C 199L Weight in use 139kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28W Energy efficiency rating C Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 1,398kWh/annum

Read more less

Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 70 ePV would typically be installed in a studio apartment, or for off-grid applications in a caravan or boat. Note, the Sunamp is very heavy:   Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications Product Code SGP-AAW-AVZ-1 Equivalent energy storage 3.2kWh Equivalent hot water capacity 74L Water available at 40°C 105L Weight in use 79kg Height 440mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 20W Energy efficiency rating C Recommended flow rate 6LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 542kWh/annum

Read more less

This is included in Telfords range of indirect heat pump cylinders, designed specifically to operate with a range of air source heat pumps. These are available in a range sizes between 150-500L capacity. They do not include a 3-port valve and this must be purchased separately.  Featuring a purpose-designed coil with a 2m² surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide back-up heat. Duplex stainless steel provides superior corrosion resistance 316L grade stainless-steel 22mm compression fittings and coils Supplies mains pressure hot water and high flow rates Remote expansion vessel with factory-fitted wall mounting bracket Full unvented kit supplied (details below) Fully insulated to minimise any heat loss Twin coil option available for use with a traditional boiler and solar thermal Lifetime manufacturing warranty on inner container (2 years on components)* Renewable and bespoke options available   Cylinder Specifications Capacity: 250L Weight (empty): 40kg Weight (full): 288kg Height: 1800mm Diameter: 554mm Coil size: 3m² Product Details Product code TSMI250/HP Standing heat loss 2.00 kWh/24h Max supply pressure 12bar Max primary pressure 3bar T&P valve setting 7bar / 90 Deg. C Included Components 3kW immersion heater T&P relief valve Acetal Tundish Inlet group control 2-port valve External expansion vessel Dual probe thermostat

Read more less

This is included in Telfords range of indirect heat pump cylinders, designed specifically to operate with a range of air source heat pumps. These are available in a range sizes between 150-500L capacity. They do not include a 3-port valve and this must be purchased separately.  Featuring a purpose-designed coil with a 2m² surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide back-up heat. Duplex stainless steel provides superior corrosion resistance 316L grade stainless-steel 22mm compression fittings and coils Supplies mains pressure hot water and high flow rates Remote expansion vessel with factory-fitted wall mounting bracket Full unvented kit supplied (details below) Fully insulated to minimise any heat loss Twin coil option available for use with a traditional boiler and solar thermal Lifetime manufacturing warranty on inner container (2 years on components)* Renewable and bespoke options available Cylinder Specifications Capacity: 200L Weight (empty): 36kg Weight (full): 230kg Height: 1500mm Diameter: 554mm Coil size: 3m² Product Details Product code TSMI200/HP Standing heat loss 1.85 kWh/24h Max supply pressure 12bar Max primary pressure 3bar T&P valve setting 7bar / 90 Deg. C Included Components 3kW immersion heater T&P relief valve Acetal Tundish Inlet group control 2-port valve External expansion vessel Dual probe thermostat

Read more less

This is included in Telfords range of indirect heat pump cylinders, designed specifically to operate with a range of air source heat pumps. These are available in a range sizes between 150-500L capacity. They do not include a 3-port valve and this must be purchased separately.  Featuring a purpose-designed coil with a 2m² surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide back-up heat. Duplex stainless steel provides superior corrosion resistance 316L grade stainless-steel 22mm compression fittings and coils Supplies mains pressure hot water and high flow rates Remote expansion vessel with factory-fitted wall mounting bracket Full unvented kit supplied (details below) Fully insulated to minimise any heat loss Twin coil option available for use with a traditional boiler and solar thermal Lifetime manufacturing warranty on inner container (2 years on components)* Renewable and bespoke options available Cylinder Specifications Capacity: 170L Weight (empty): 34kg Weight (full): 202kg Height: 1200mm Diameter: 510mm Coil size: 2m² Product Details Product code TSMI170/HP Standing heat loss 1.94 kWh/24h Max supply pressure 12bar Max primary pressure 3bar T&P valve setting 7bar / 90 Deg. C Included Components 3kW immersion heater T&P relief valve Acetal Tundish Inlet group control 2-port valve External expansion vessel Dual probe thermostat

Read more less

This is included in Telfords range of indirect heat pump cylinders, designed specifically to operate with a range of air source heat pumps. These are available in a range sizes between 150-500L capacity. They do not include a 3-port valve and this must be purchased separately.  Featuring a purpose-designed coil with a 2m² surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide back-up heat. Duplex stainless steel provides superior corrosion resistance 316L grade stainless-steel 22mm compression fittings and coils Supplies mains pressure hot water and high flow rates Remote expansion vessel with factory-fitted wall mounting bracket Full unvented kit supplied (details below) Fully insulated to minimise any heat loss Twin coil option available for use with a traditional boiler and solar thermal Lifetime manufacturing warranty on inner container (2 years on components)* Renewable and bespoke options available Cylinder Specifications Capacity: 150L Weight (empty): 30kg Weight (full): 179kg Height: 1060mm Diameter: 510mm Coil size: 2m² Product Details Product code TSMI150/HP Standing heat loss 1.85 kWh/24h Max supply pressure 12bar Max primary pressure 3bar T&P valve setting 7bar / 90 Deg. C Included Components 3kW immersion heater T&P relief valve Acetal Tundish Inlet group control 2-port valve External expansion vessel Dual probe thermostat

Read more less

High quality British manufactured stainless steel domestic hot water cylinder with 2m² coil, suitable for heat pumps up to 16kW. World Heat Climacyl cylinders are the standard diameter variant of World Heat heat pump cylinders.  Key features High quality stainless steel 25 Year manufacturing warranty on cylinder Highly insulated, part L compliant Dual immersion heaters (main immersion for heat pump legionella cycle, 2nd immersion for PV diverter connection) Full system unvented kits WRAS approved product ISO9001 certified quality management  Kit Includes Pressure reducing valve Expansion Vessel T & P Valve Drain Cock Air Vent 3 port valve 3kW Immerssion heater General Specifications Product Code 210CLIMACYLSS2 Capacity 210L Weight 50kg Weight full 260kg Height 1600mm Diameter 600mm Cylinder warranty 25 Years Parts warranty 1 Year Technical Specifications Hot and cold connectors 22mm Coil surface area 2m2 & 3m2 Standing Heat Loss 77.08W Expansion vessel size 18L ERP Band B

Read more less

High quality British manufactured stainless steel domestic hot water cylinder with 2m² coil, suitable for heat pumps up to 16kW. World Heat Climacyl cylinders are the standard diameter variant of World Heat heat pump cylinders.  Key features High quality stainless steel 25 Year manufacturing warranty on cylinder Highly insulated, part L compliant Dual immersion heaters (main immersion for heat pump legionella cycle, 2nd immersion for PV diverter connection) Full system unvented kits WRAS approved product ISO9001 certified quality management  Kit Includes Pressure reducing valve Expansion Vessel T & P Valve Drain Cock Air Vent 3 port valve 3kW Immerssion heater General Specifications Product Code 180CLIMACYLSS2 Capacity 180L Weight 45kg Weight full 225kg Height 1450mm Diameter 600mm Cylinder warranty 25 Years Parts warranty 1 Year Technical Specifications Hot and cold connectors 22mm Coil surface area 2m2 & 3m2 Standing Heat Loss 66.67W Expansion vessel size 12L ERP Band B

Read more less

Indoor unit, suitable for new builds and renovations, The AWE are intended for assembly in a house and for connection to Compress 7001i AW/Compress 7400i AW heat pumps installed outdoors. Quiet, neat and compact they fit well into any home. Product number  7738602108 Height 700mm Width 485mm Depth 386mm Net Weight 32kg Warranty 2 years

Read more less

Indoor unit, suitable for new builds and renovations, The AWE are intended for assembly in a house and for connection to Compress 7001i AW/Compress 7400i AW heat pumps installed outdoors. Quiet, neat and compact they fit well into any home. Product number 7738602107 Height 700mm Width 485mm Depth 386mm Net Weight 32kg Warranty 2 years

Read more less

The quietest heat pump in Bosch's range, this premium unit is suitable for both new builds and renovations. It is designed as a monobloc unit with hermetically sealed refrigeration circuit for low maintenance and easy installation. The units boast A+++ at 35 degrees flow for heating and have additional cooling functionality from 15°C to 45°C. Quiet mark certified, they are notably quieter than other heat pumps on the market. Product number Outdoor Unit: 7738602075 MCS listed SCOPs @35°C 4.73 @40°C 4.35 @45°C 3.97 @50°C 3.62 @55°C 3.27 Heating nominal capacity 6kW Compressor type Twin rotary compressor Refrigerant Type R410A Refrigerant Volume 1.75kg Required flow rate 25.8L/m Heating up to 62°c Min operating temperature -18°c Max operating temperature 60°c Electricity Supply 230V 1N AC 50Hz Sound Power Level 50dBA Height 1380mm Width 940mm Depth 600mm Net Weight 113kg Warranty 2 years

Read more less

The quietest heat pump in Bosch's range, this premium unit is suitable for both new builds and renovations. It is designed as a monobloc unit with hermetically sealed refrigeration circuit for low maintenance and easy installation. The units boast A+++ at 35 degrees flow for heating and have additional cooling functionality from 15°C to 45°C. Quiet mark certified, they are notably quieter than other heat pumps on the market. Product number Outdoor Unit: 7738602075 MCS listed SCOPs @35°C 4.73 @40°C 4.35 @45°C 3.97 @50°C 3.62 @55°C 3.27 Heating nominal capacity 4kW Compressor type Twin rotary compressor Refrigerant Type R410A Refrigerant Volume 1.75kg Required flow rate 19.8L/m Heating up to 62°c Min operating temperature -18°c Max operating temperature 60°c Electricity Supply 230V 1N AC 50Hz Sound Power Level 50dBA Height 1380mm Width 940mm Depth 600mm Net Weight 113kg Warranty 2 years

Read more less

Suitable for new builds and renovations, the 7001i AW heat pumps are quality products with A+++ energy ratings. Quiet mark certified they are notably quieter than other heat pumps on the market. This has a 3-phase electrical input.  Product number Outdoor Unit: 7738601998 MCS listed SCOPs @35°C 3.55 @40°C 3.43 @45°C 3.51 @50°C 3.18 @55°C 2.85 Heating nominal capacity 10kW Compressor type Twin rotary compressor Refrigerant Type R410A Refrigerant Volume 4kg Required flow rate 48.60L/m Heating up to 62°c Min operating temperature -18°c Max operating temperature 60°c Electricity Supply 400V 3N AC, 50Hz Sound Power Level 53dBA Height 1695mm Width 1122mm Depth 545mm Net Weight 193kg Warranty 2 years

Read more less

Suitable for new builds and renovations, the 7001i AW heat pumps are quality products with A+++ energy ratings. Quiet mark certified they are notably quieter than other heat pumps on the market. Product number Outdoor Unit: 7738602089 MCS listed SCOPs @35°C 4.60 @40°C 4.27 @45°C 3.93 @50°C 3.65 @55°C 3.38 Heating nominal capacity 9kW Compressor type Twin rotary compressor Refrigerant Type R410A Refrigerant Volume 3.30kg Required flow rate 37.2L/m Heating up to 62°c Min operating temperature -17°c Max operating temperature 60°c Electricity Supply 230V 1N AC, 50Hz Sound Power Level 55 dBA Height 1695mm Width 1122mm Depth 545mm Net Weight 182kg Warranty 2 years

Read more less

Suitable for new builds and renovations, the 7001i AW heat pumps are quality products with A+++ energy ratings. Quiet mark certified they are notably quieter than other heat pumps on the market. Product number Outdoor Unit: 8738210257 MCS listed SCOPs @35°C 4.57 @40°C 4.34 @45°C 4.10 @50°C 3.77 @55°C 3.44 Heating nominal capacity 7.0kW Compressor type Twin rotary compressor Refrigerant Type R410A Refrigerant Volume 2.35kg Required flow rate 25.8L/m Heating up to 62°c Min operating temperature -18°c Max operating temperature 60°c Electricity Supply 230V 1N AC 50Hz Sound Power Level 48dBA Height 1380mm Width 930mm Depth 440mm Net Weight 114kg Warranty 2 years

Read more less

Suitable for new builds and renovations, the 7001i AW heat pumps are quality products with A+++ energy ratings. Quiet mark certified they are notably quieter than other heat pumps on the market. Product number Outdoor Unit: 8738210256 MCS listed SCOPs @35°C 4.77 @40°C 4.45 @45°C 4.12 @50°C 3.78 @55°C 3.43 Heating nominal capacity 5.0kW Compressor type Twin rotary compressor Refrigerant Type R410A Refrigerant Volume 1.75kg Required flow rate 19.8L/m Heating up to 62°c Min operating temperature -19°c Max operating temperature 60°c Electricity Supply 230V 1N AC 50Hz Sound Power Level 47 dBA Height 1380mm Width 930mm Depth 440mm Net Weight 107kg Warranty 2 years

Read more less

Suitable for new builds and renovations, the 7001i AW heat pumps are quality products with A+++ energy ratings. Quiet mark certified they are notably quieter than other heat pumps on the market. Product number Outdoor Unit: 8738210255 MCS listed SCOPs @35°C 4.41 @40°C 4.10 @45°C 3.80 @50°C 3.51 @55°C 3.22 Heating nominal capacity 4.0kW Compressor type Twin rotary compressor Refrigerant Type      R410A Refrigerant Volume 1.7kg Required flow rate 19.2L/m Heating up to 62°c Min operating temperature -18°c Max operating temperature  60°c Electricity Supply 230V 1N AC 50Hz Sound Power Level 47 dBA Height 1380mm Width 930mm Depth 440mm Net Weight 106kg Warranty 2 years

Read more less

The WPM system is a radical new control concept. The comprehensive functions of the WPM standard module can be extended with WPE modules and the FET remote control.  All of these components can be conveniently connected to one another via the system bus. The WPM heat pump manager is the central control unit of the system, and its integral programming unit is able to regulate numerous functions, such as a cascade of two heat pumps or the control of one direct heating circuit and two heating circuits with a mixer. If extended to include the WPE module, a further four heat pumps and two further heating circuits with mixer can also be controlled. These heating circuits (five in total) can each be controlled by an FET remote control.  The components combine functionality, extendibility and ease of installation. All the modules feature the attractive new design and have significantly improved connections for the electrical installation components. The most comprehensive and up-to-date information for this product can be found on the Stiebel Eltron TOOLBOX.   Product Information Product name FET Product number 234723 Height 96mm Width 145mm Depth 31mm Warranty 7 years* *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPE-I 15 H 230 Premium Pack contains contains a 15kw ground source heat pump, a 290L cylinder and freestanding 100L buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump Made in Germany, Stiebel Eltron's exceptionally high quality and efficient WPE-I H Premium inverter geothermal heat pumps are neat, quiet and reliable. The device uses the heat from the ground for heating and hot water operation providing year-round constant heat output with high flow temperatures of up to 75°C. They are a future-proof and environmentally friendly refrigerant and contain the option for integration into the home network and control via a smartphone. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPE-I 15 H 230 Premium Pack Product number 204404 Pack warranty 7 years* Kit Includes 1 15kW Ground sourceheat pump WPE-I 15 H 230 Premium 238613 1 300L cylinder SBB 302 WP (GB) Set 228945 1 100L buffer SBP 100 classic 235200 1 Central heating pump WPKI-HK E 233602 2 Strainer FS-WP 28 233512 1 Digital Thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Bronze potable pump  UP 25-60 B 056899 2 Temperature sensor PT 1000 235996 1 Ground loop filling kit WPSF 233307 Heat Pump Technical Information Product name WPE-I 15 H 230 Premium Product number 238613 Heating output at B0/W35 5,18 kW COP at B0/W35 4.86 SCOP 5.44 Sound power level 39 - 47 dB(A) Refrigerant R454C Height 1369mm Width 598mm Depth 658mm Net Weight 190kg Cylinder Technical Information Product name SBB 302 WP (GB) Set Product number 228945 Capacity 290L Weight 184kg Weight full 374kg Height 1770mm Diameter 700mm Buffer seperate, see below Coil surface area 4.80m2 ERP Band C Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPE-I 12 H 230 Premium Pack contains contains a 12kw ground source heat pump, a 290L cylinder and freestanding 100L buffer along with all the equipment required for a comprehensive heat pump install. Heat Pump Made in Germany, Stiebel Eltron's exceptionally high quality and efficient WPE-I H Premium inverter geothermal heat pumps are neat, quiet and reliable. The device uses the heat from the ground for heating and hot water operation providing year-round constant heat output with high flow temperatures of up to 75°C. They are a future-proof and environmentally friendly refrigerant and contain the option for integration into the home network and control via a smartphone. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPE-I 12 H 230 Premium Pack Product number 204407 Pack warranty 7 years* Kit Includes 1 12kW Ground sourceheat pump WPE-I 12 H 230 Premium 238612 1 300L cylinder SBB 302 WP (GB) Set 228945 1 100L buffer SBP 100 classic 235200 1 Central heating pump WPKI-HK E 233602 2 Strainer FS-WP 28 233512 1 Digital Thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Bronze potable pump  UP 25-60 B 056899 2 Temperature sensor PT 1000 235996 1 Ground loop filling kit WPSF 233307 Heat Pump Technical Information Product name WPE-I 12 H 230 Premium Product number 238612 Heating output at B0/W35 4,19 kW COP at B0/W35 5.01 SCOP 5.59 Sound power level 39 - 46 dB(A) Refrigerant R454C Height 1369mm Width 598mm Depth 658mm Net Weight 180kg Cylinder Technical Information Product name SBB 302 WP (GB) Set Product number 228945 Capacity 290L Weight 184kg Weight full 374kg Height 1770mm Diameter 700mm Buffer seperate, see below Coil surface area 4.80m2 ERP Band C Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPE-I 08 H 230 Premium Pack contains contains a 8kw ground source heat pump, a 290L cylinder and freestanding 100L buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump Made in Germany, Stiebel Eltron's exceptionally high quality and efficient WPE-I H Premium inverter geothermal heat pumps are neat, quiet and reliable. The device uses the heat from the ground for heating and hot water operation providing year-round constant heat output with high flow temperatures of up to 75°C. They are a future-proof and environmentally friendly refrigerant and contain the option for integration into the home network and control via a smartphone. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPE-I 08 H 230 Premium Pack Product number 204402 Pack warranty 7 years* Kit Includes 1 8kW Ground sourceheat pump WPE-I 08 H 230 Premium 238611 1 300L cylinder SBB 302 WP (GB) Set 228945 1 100L buffer SBP 100 classic 235200 1 Central heating pump WPKI-HK E 233602 2 Strainer FS-WP 28 233512 1 Digital Thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Bronze potable pump  UP 25-60 B 056899 2 Temperature sensor PT 1000 235996 1 Ground loop filling kit WPSF 233307 Heat Pump Technical Information Product name WPE-I 08 H 230 Premium Product number 238611 Heating output at B0/W35 2,78 kW COP at B0/W35 4.67 SCOP 5.12 Sound power level 38 - 45 dB(A) Refrigerant R454C Height 1369mm Width 598mm Depth 658mm Net Weight 180kg Cylinder Technical Information Product name SBB 302 WP (GB) Set Product number 228945 Capacity 290L Weight 184kg Weight full 374kg Height 1770mm Diameter 700mm Buffer seperate, see below Coil surface area 4.80m2 ERP Band C Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPE-I 06 H 230 Premium Pack contains contains a 6kw ground source heat pump, a 290L cylinder and freestanding 100L buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump Made in Germany, Stiebel Eltron's exceptionally high quality and efficient WPE-I H Premium inverter geothermal heat pumps are neat, quiet and reliable. The device uses the heat from the ground for heating and hot water operation providing year-round constant heat output with high flow temperatures of up to 75°C. They are a future-proof and environmentally friendly refrigerant and contain the option for integration into the home network and control via a smartphone. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPE-I 04 H 230 Premium Pack Product number 204405 Pack warranty 7 years* Kit Includes 1 6kW Ground sourceheat pump WPE-I 06 H 230 Premium 238610 1 300L cylinder SBB 302 WP (GB) Set 228945 1 100L buffer SBP 100 classic 235200 1 Central heating pump WPKI-HK E 233602 2 Strainer FS-WP 28 233512 1 Digital Thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Bronze potable pump  UP 25-60 B 056899 2 Temperature sensor PT 1000 235996 1 Ground loop filling kit WPSF 233307 Heat Pump Technical Information Product name WPE-I 06 H 230 Premium Product number 238610 Heating output at B0/W35 2,37 kW COP at B0/W35 4.60 SCOP 5.20 Sound power level 38 - 43 dB(A) Refrigerant R454C Height 1369mm Width 598mm Depth 658mm Net Weight 180kg Cylinder Technical Information Product name SBB 302 WP (GB) Set Product number 228945 Capacity 290L Weight 184kg Weight full 374kg Height 1770mm Diameter 700mm Buffer seperate, see below Coil surface area 4.80m2 ERP Band C Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPE-I 04 H 230 Premium Pack contains contains a 4kw ground source heat pump, a 290L cylinder and freestanding 100L buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump Made in Germany, Stiebel Eltron's exceptionally high quality and efficient WPE-I H Premium inverter geothermal heat pumps are neat, quiet and reliable. The device uses the heat from the ground for heating and hot water operation providing year-round constant heat output with high flow temperatures of up to 75°C. They are a future-proof and environmentally friendly refrigerant and contain the option for integration into the home network and control via a smartphone. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPE-I 04 H 230 Premium Pack Product number 204399 Pack warranty 7 years* Kit Includes 1 4kW Ground sourceheat pump WPE-I 04 H 230 Premium 202613 1 300L cylinder SBB 302 WP (GB) Set 228945 1 100L buffer SBP 100 classic 235200 1 Central heating pump WPKI-HK E 233602 2 Strainer FS-WP 28 233512 1 Digital Thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Bronze potable pump  UP 25-60 B 056899 2 Temperature sensor PT 1000 235996 1 Ground loop filling kit WPSF 233307 Heat Pump Technical Information Product name WPE-I 04 H 230 Premium Product number 202613 Heating output at B0/W35 1,96 kW COP at B0/W35 4.60 SCOP 5.07 Sound power level 38 - 40 dB(A) Refrigerant R454C Height 1369mm Width 598mm Depth 658mm Net Weight 180kg Cylinder Technical Information Product name SBB 302 WP (GB) Set Product number 228945 Capacity 290L Weight 184kg Weight full 374kg Height 1770mm Diameter 700mm Buffer seperate, see below Coil surface area 4.80m2 ERP Band C Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market. These units can be cascaded with up to 6 other identical units to provide up to 84kW of heat output.  The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. The Ecodan comes with a range of compatible storage tanks in a range of capacities; pre-plumbed or packaged. Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -28°C Optimised low ambient defrost control and operation down to -15°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Technical Information Product number PUZ-HWM140VHA(-BS) MCS listed SCOPs @35°C 4.33 @40°C 4.05 @45°C 3.77 @50°C 3.51 @55°C 3.26 Heating nominal capacity 14.0kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3.3kg Nominal flow rate 40.1L/m Minimum water content 20L Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 67dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 132kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market. These units can be cascaded with up to 6 other identical units to provide up to 84kW of heat output.  The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. The Ecodan comes with a range of compatible storage tanks in a range of capacities; pre-plumbed or packaged. Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -28°C Optimised low ambient defrost control and operation down to -15°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Technical Information Product number PUZ-HWM140VHA(-BS) MCS listed SCOPs @35°C 4.33 @40°C 4.05 @45°C 3.77 @50°C 3.51 @55°C 3.26 Heating nominal capacity 14.0kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3.3kg Nominal flow rate 40.1L/m Minimum water content 20L Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 67dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 132kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market. These units can be cascaded with up to 6 other identical units to provide up to 84kW of heat output.  The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. The Ecodan comes with a range of compatible storage tanks in a range of capacities; pre-plumbed or packaged. Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -28°C Optimised low ambient defrost control and operation down to -15°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Technical Information Product number PUZ-HWM140VHA(-BS) MCS listed SCOPs @35°C 4.33 @40°C 4.05 @45°C 3.77 @50°C 3.51 @55°C 3.26 Heating nominal capacity 14.0kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3.3kg Nominal flow rate 40.1L/m Minimum water content 20L Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 67dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 132kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market. These units can be cascaded with up to 6 other identical units to provide up to 84kW of heat output.  The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. The Ecodan comes with a range of compatible storage tanks in a range of capacities; pre-plumbed or packaged. Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -28°C Optimised low ambient defrost control and operation down to -15°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Technical Information Product number PUZ-HWM140VHA(-BS) MCS listed SCOPs @35°C 4.33 @40°C 4.05 @45°C 3.77 @50°C 3.51 @55°C 3.26 Heating nominal capacity 14.0kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3.3kg Nominal flow rate 40.1L/m Minimum water content 20L Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 67dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 132kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market. These units can be cascaded with up to 6 other identical units to provide up to 84kW of heat output.  The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. The Ecodan comes with a range of compatible storage tanks in a range of capacities; pre-plumbed or packaged. Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -28°C Optimised low ambient defrost control and operation down to -15°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Standalone Kit Includes: WIFI Interface Flow and return water temperature thermistor DWH water temperature thermistor Magnetic Filter  Insulated flexible connection pipes  Flow sensor Technical Information Product number PUZ-HWM140VHA(-BS) MCS listed SCOPs @35°C 4.33 @40°C 4.05 @45°C 3.77 @50°C 3.51 @55°C 3.26 Heating nominal capacity 14.0kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3.3kg Nominal flow rate 40.1L/m Minimum water content 20L Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 67dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 132kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market and includes 5.0, 6.0, 8.5 and 11.2kW sizes. These units also have the ability to cascade up to 6 of the same unit. In this case, they could provide 67.2kW of heat output. The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. This Ecodan come as standalone, packaged, or a large pre-plumbed cylinder. The Phase 2 large standard cylinders come with 28mm pipe connections. Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -25°C Optimised low ambient defrost control and operation down to -7°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Technical Information Product number PUZ-WM112VAA(-BS) MCS listed SCOPs @35°C 4.74 @40°C 4.36 @45°C 3.97 @50°C 3.66 @55°C 3.34 Heating nominal capacity 11.2kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3kg Nominal flow rate 32.1L/m Minimum water content 16L/m Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 60dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 119kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market and includes 5.0, 6.0, 8.5 and 11.2kW sizes. These units also have the ability to cascade up to 6 of the same unit. In this case, they could provide 67.2kW of heat output. The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. This Ecodan come as standalone, packaged, or a large pre-plumbed cylinder. The Phase 2 large standard cylinders come with 28mm pipe connections. Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -25°C Optimised low ambient defrost control and operation down to -7°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Technical Information Product number PUZ-WM112VAA(-BS) MCS listed SCOPs @35°C 4.74 @40°C 4.36 @45°C 3.97 @50°C 3.66 @55°C 3.34 Heating nominal capacity 11.2kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3kg Nominal flow rate 32.1L/m Minimum water content 16L/m Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 60dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 119kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market and includes 5.0, 6.0, 8.5 and 11.2kW sizes. These units also have the ability to cascade up to 6 of the same unit. In this case, they could provide 67.2kW of heat output. The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. This Ecodan come as standalone, packaged, or a large pre-plumbed cylinder. The Phase 2 large standard cylinders come with 28mm pipe connections. Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -25°C Optimised low ambient defrost control and operation down to -7°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Technical Information Product number PUZ-WM112VAA(-BS) MCS listed SCOPs @35°C 4.74 @40°C 4.36 @45°C 3.97 @50°C 3.66 @55°C 3.34 Heating nominal capacity 11.2kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3kg Nominal flow rate 32.1L/m Minimum water content 16L/m Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 60dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 119kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market and includes 5.0, 6.0, 8.5 and 11.2kW sizes. These units also have the ability to cascade up to 6 of the same unit. In this case, they could provide 67.2kW of heat output. The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. This Ecodan come as standalone, packaged, or a large pre-plumbed cylinder. The Phase 2 large standard cylinders come with 28mm pipe connections. Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -25°C Optimised low ambient defrost control and operation down to -7°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Technical Information Product number PUZ-WM112VAA(-BS) MCS listed SCOPs @35°C 4.74 @40°C 4.36 @45°C 3.97 @50°C 3.66 @55°C 3.34 Heating nominal capacity 11.2kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3kg Nominal flow rate 32.1L/m Minimum water content 16L/m Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 60dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 119kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market and includes 5.0, 6.0, 8.5 and 11.2kW sizes. These units also have the ability to cascade up to 6 of the same unit. In this case, they could provide 67.2kW of heat output. The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. This Ecodan come as standalone, packaged, or a large pre-plumbed cylinder. The Phase 2 large standard cylinders come with 28mm pipe connections. Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -25°C Optimised low ambient defrost control and operation down to -7°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Standalone Kit Includes: WIFI Interface Flow and return water temperature thermistor DWH water temperature thermistor Magnetic Filter  Insulated flexible connection pipes  Flow sensor Technical Information Product number PUZ-WM112VAA(-BS) MCS listed SCOPs @35°C 4.74 @40°C 4.36 @45°C 3.97 @50°C 3.66 @55°C 3.34 Heating nominal capacity 11.2kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3kg Nominal flow rate 32.1L/m Minimum water content 16L/m Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 60dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 119kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market and includes 5.0, 6.0, 8.5, and 11.2kW sizes. These units also have the ability to cascade up to 6 of the same unit. In this case, they could provide 51kW of heat output. The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. The Ecodan comes with a range of compatible storage tanks in a range of capacities; standard pre-plumbed, slimline pre-plumbed, or packaged. The Phase 2 cylinders have also been released for the 8.5kW which now come with 22mm (small) and 28mm (large) pipe connections.  Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -20°C Optimised low ambient defrost control and operation down to -10°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Technical Information Product number PUZ-WM85VAA(-BS) MCS listed SCOPs @35°C 4.84 @40°C 4.49 @45°C 4.14 @50°C 3.81 @55°C 3.48 Heating nominal capacity 8.50kW Compressor type Rotary Refrigerant Type R32 Refrigerant Volume 2.2kg Nominal flow rate 24.4L/m Minimum water content 12L/m Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 58dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 98kg Warranty Min 3 years

Read more less

The multiple award winning range of Ultra Quiet AA chassis Ecodan monobloc air source heat pumps are designed specifically to suit the demands of the UK market and includes 5.0, 6.0, 8.5, and 11.2kW sizes. These units also have the ability to cascade up to 6 of the same unit. In this case, they could provide 51kW of heat output. The innovative, stylish and compact single fan outdoor unit utilises advanced technologies to deliver improved efficiencies. Designed for a wide range of applications, the market leading low noise levels virtually eliminate the need for planning permission, maximises installation options and is a viable solution for all types of domestic requirements that the UK housing market demands. The Ecodan comes with a range of compatible storage tanks in a range of capacities; standard pre-plumbed, slimline pre-plumbed, or packaged. The Phase 2 cylinders have also been released for the 8.5kW which now come with 22mm (small) and 28mm (large) pipe connections.  Key Features Self-contained unit, only requiring water and electric connections No need for gas supply, flues or ventilation Low maintenance and ultra quiet operation Operates with outside temperatures as low as -20°C Optimised low ambient defrost control and operation down to -10°C Hybrid function, for use with conventional boilers Energy monitoring as standard Multiple unit cascade function Technical Information Product number PUZ-WM85VAA(-BS) MCS listed SCOPs @35°C 4.84 @40°C 4.49 @45°C 4.14 @50°C 3.81 @55°C 3.48 Heating nominal capacity 8.50kW Compressor type Rotary Refrigerant Type R32 Refrigerant Volume 2.2kg Nominal flow rate 24.4L/m Minimum water content 12L/m Heating up to 55°c Min operating temperature -20°c Max operating temperature 35°c Electricity Supply 220-240V Sound Power Level 58dBA Height 1020mm Width 1050mm Depth 480mm Net Weight 98kg Warranty Min 3 years

Read more less