INVERTERS

 Part No: X1-AC-3.6 Storage Systems - Charger-Inverter X1 AC Charger Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland. Supplier Part No: X1-AC-3.6 Charger Weight: 18 kg Rated Power: 3,680 W Data Sheet Solax X1 AC coupled

Read more less

The SolaX X1 Hybrid 7.5kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements. The Gen4 has been designed and developed using the very latest solar technology. SolaX  have pushed back the boundaries for what is possible when designing a storage inverter. The ground-breaking SolaX X1 Hybrid 7.5kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. In-built EPS changeover switch Supports up to 150% PV oversizing and 110% overload output Can work at full capacity down to -35C 97.0% Charge/discharge efficiency On-grid and off-grid use 5 work modes, 2 charging periods available IP65 protection level CT compatible, loads respond within 0.3s 30 Minute Total Installation Time Includes WiFi Dongle

Read more less

Part No: X3-HYBRID-G4-10.0-V2 Storage Systems - Hybrid Inverter High-efficient 150% PV oversized and 110% overload output Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking functio Economic Maximum 16A DC input current, support for high power solar panel Store the surplus energy from PV to battery Low start output voltage makes inverter longer working time Less energy loss on battery to inverter Intelligent Switchover time <10ms Quick configuration with U-disk Lithium & Lead-acid battery compatible CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW 5 work modes, 2 charging periods available VPP ready, ancillary service in power market Three-phase unbalanced output 50% nominal output power on single phase at most Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment Supplier Part No: X3-Hybrid G4 10.0 V2 with Wi-Fi & CT Weight: 34 kg Rated Power: 10,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 180 V DC Shutdown Voltage: 0 V Max Input Voltage: 950 V Max DC Power: 10,000 W Max AC Power (5 Minutes): 10,001 W Surge AC Power (1 Second): 10,002 W Max DC Current: 24 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 0 Euro Efficiency: 97 % Transformer: HF MPPT Quantity : 0 Has Integrated DC Switch: No Data Sheet X3 G4

Read more less

 Part No: X1-HYBRID-G4-3.7 Storage Systems - Hybrid Inverter G4 HV Single Phase Hybrid Inverter and Charge controller range This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Supplier Part No: X1 G4- Hybrid 3.7 D Weight: 24 kg Rated Power: 3,700 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 5,500 W Max AC Power (5 Minutes): 3,680 W Surge AC Power (1 Second): 4,400 W Max DC Current: 28 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 10 years Data Sheet G4 Hybrid

Read more less

 Part No: X1-HYBRID-G4-5.0 Storage Systems - Hybrid Inverter G4 HV Single Phase Hybrid Inverter and Charge controller range This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Supplier Part No: X1 G4- Hybrid 5.0 D Weight: 28 kg Rated Power: 5,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 4,600 W Surge AC Power (1 Second): 5,500 W Max DC Current: 28 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 10 years Data Sheet G4 Hybrid

Read more less

Part No: SOLAX-BMS-HV-T58-2-11.6 Storage Systems - Li-ion Battery Pack This part is made up of the following items: 2 x HV11550-58-SLAVE-V2 SolaX Triple Power HV 5.8kWh LFP Extension Battery SLAVE V2   1 x SOLAX-BMS-PB SOLAX BMS Parallel Box   Package of: Solax BMS Parallel Box and SolaX Triple Power 5.8 Slave Battery The Solax BMS Parallel Box is an advanced battery management system that enables seamless parallel connection of multiple batteries, ensuring efficient energy utilisation and enhanced performance. With its cutting-edge technology and robust design, this parallel box is the ideal choice for residential and commercial applications. Included in Kit KIT-SOLAX-X1-3.0 Solax X1 3.0kW Hybrid Kit UK KIT-SOLAX-X1-3.6-AC SolaX 3.6kW AC Coupled Kit UK KIT-SOLAX-X1-5.0 Solax X1 5.0kW Hybrid Kit UK KIT-SOLAX-X3-10 Solax X3 10kW Hybrid Kit UK KIT-SOLAX-X3-8 Solax X3 8.0kW Hybrid Kit UK Weight:149.6 kg Battery Type:Lithium Ion Nominal Energy:11600 Wh Depth of discharge:90.00 % Voltage:230 V Continuous Discharge Rate (Normal Use):5750 W Maximum Discharge Rate (5 Minutes):3500 W Surge Discharge Rate (15 Seconds):800 W Maximum Charge Rate (5 Minutes):3500 W

Read more less

Part No: X3-FIT-10 Storage Systems - Charger-Inverter Three Phase Retro Fit 10.0kW AC Coupled inverter Product Features Compatible with High voltage batteries IP65 protection rating Natural cooling and low maintenance Max Efficiency up to 96% This is the E version of the inverter with built in EPS function. It required external back up box to fully utilise the EPS function. It can be used with between 2 and 4 Solax Triple Power Batteries (one size batteries per system only) . This inverter can be paralleled up to 5 units per site. Looking to expand your system capacity? See Solax EPS Parallel Box options X3-PBOX-60kW-G2 – Connect up 6 hybrid inverters with a maximum of 60kW X3-PBOX-150kW-G2 – Connect up 10 hybrid inverters with a maximum of 150kW   Supplier Part No:X3-FIT 10.0 Charger Weight:38 kg Rated Power:10,000 W

Read more less

Part No: X1-AC-3.0 Storage Systems - Charger-Inverter X1 AC Charger Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland.   A LOT BETTER VALUE IF BOUGHT AS A PACKAGE   Supplier Part No:X1-AC-3.0 Charger Weight:18 kg Rated Power:3,000 W

Read more less

Part No: X3-HYBRID-G4-8.0-V2 Storage Systems - Hybrid Inverter   High-efficiency 150% PV oversized and 110% overload output. Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking function Economic Maximum 16A DC input current, support for high power solar panels Low start output voltage Less energy loss from battery to inverter Intelligent Switchover time <10ms Quick configuration with U-disk Lithium & Lead-acid battery compatible CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW 5 work modes, 2 charging periods available VPP ready, ancillary service in power market Three-phase unbalanced output 50% nominal output power on single phase at most Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment PLEASE NOTE: We are still awaiting some documents from SolaX for this range - these will be uploaded as soon as they are received.   Supplier Part No: X3-HYBRID-8.0-D G4.2 (wifi incl) Weight: 30 kg Rated Power: 8,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 200 V DC Shutdown Voltage: 200 V Max Input Voltage: 950 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,001 W Surge AC Power (1 Second): 8,002 W Max DC Current: 26 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years

Read more less

Part No: X3-HYBRID-G4-15.0-V2 Storage Systems - Hybrid Inverter High-efficiency 150% PV oversized and 110% overload output. Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking function Economic Maximum 16A DC input current, support for high power solar panels Low start output voltage Less energy loss from battery to inverter Intelligent Switchover time <10ms CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment PLEASE NOTE: We are still awaiting some documents from SolaX for this range - these will be uploaded as soon as they are received.   Supplier Part No: X3-Hybrid 15.0-D G4 V2 with WiFi Weight: 30 kg Rated Power: 15,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 200 V DC Shutdown Voltage: 200 V Max Input Voltage: 950 V Max DC Power: 18,000 W Max AC Power (5 Minutes): 15,001 W Surge AC Power (1 Second): 15,002 W Max DC Current: 26 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years

Read more less

Part No: SE-33300-SPD-RSD Inverters - Main Units Rating: 33,300W Phases: 3 Three Phase Inverter, 33.3kW, Glands, DC safety unit with switch, AC & DC SPD, Fuses, RSD, Inverters with SetApp configuration SE33.3K-RWR0IBNZ4 These are outstanding inverters for medium to large commercial rooftop and ground mount installs Product Features Built-in module level monitoring with Ethernet, wireless and GSM communication Easy config using smartphone and SolarEdge SetApp Small and light to install Type 2 DC and AC surge protection Arc Fault protection IP65 DC safety unit for external DC Isolators   Supplier Part No: SE33.3K-RWR0IBNZ4 Weight: 36.5 kg Rated Power: 33,300 W Min PPT Voltage: 750 V Max PPT Voltage: 1,000 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 1,000 V Max DC Power: 50,000 W Max AC Power (5 Minutes): 33,300 W Surge AC Power (1 Second): 33,300 W Max DC Current: 48.25 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 98 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years

Read more less

Part No: SUN2000-30KTL-M3 Inverters - Main Units Rating: 30,000W Phases: 3 The Huawei SUN2000-30KTL-M3 30kW 3phase inverter has a maximum efficiency up to 98.7 with an adaptable and flexible quad MPPT. Type II DC & AC surge arrestors are integrated into the unit and natural cooling effectively improves product reliability. Product Features Smart 4 MPPTs for versatile adaptions to different layouts 8 strings intelligent monitoring and fast trouble-shooting Wide MPPT range. Integrated PID Recovery Efficient Maximum efficiency 98.7% European efficiency 98.4% <5.5W consumption during the night Safe DC switch integrated, safe and convenient for maintenance Type II surge arresters for both DC and AC Residual Current Detection (RCD) protection Arc Fault Protection Anti-islanding Protection Reliable No need for external fans with natural cooling technology Protection rating of IP66 5 year manufacturer warranty as standard: optional upgradable to 10 years. Note: This inverter has no screen and must be commissioned either by using the SUN2000 app on an Android phone and IOS or by connecting the unit to the Smart Logger. UK only: This inverter has been tested and certified according to G99, but only for units having most recent Firmware. Please check if the unit you are purchasing meets that criteria and if in doubt, please update the inverter firmware.  All residential and commercial inverters can now be monitored by FusionSolar. A Smartlogger is required for plants with more than 10 inverters UK G100 Export Limitation possible with additional Power Management packages.   Supplier Part No: 01075485-002 Weight: 43 kg Rated Power: 30,000 W Min PPT Voltage: 200 V Max PPT Voltage: 1,100 V DC Startup Voltage: 200 V DC Shutdown Voltage: 0 V Max Input Voltage: 1,100 V Max DC Power: 45,000 W Max AC Power (5 Minutes): 33,000 W Surge AC Power (1 Second): 33,000 W Max DC Current: 104 A Max DC Inputs: 8 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 98.4 % Transformer: None MPPT Quantity : 4 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: SOL-S5-GC60K-DC Inverters - Main Units Rating: 60,000W Phases: 3 S5-GC60K - Series 5 Three Phase Grid-Tied Inverter Product Features Max. efficiency of 98.7%  Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 195V and max PV input voltage of 1100V Max PV DC Power of 90kW 32A input per MPPT, 16A input for each PV string Maximum output power of 66kW  6 MPPT design with precise MPPT algorithm, with 2 DC inputs per MPPT effectively reducing string mismatch Intelligent monitoring, Smart I-V Curve Diagnosis Integrated AFCI (DC arc-fault circuit protection) IP66 Rated and C5 Anti-Corrosion Level Integrated DC switch for emergency shut-down of PV power or safe PV maintenance DC reverse-polarity protection Supports PLC/GPRS/WiFi communication with less wiring and reduced installation costs 5-year standard warranty Register on SolisCloud, to support remote upgrade and control. SA: NRS-097-2-1 Certified AC Protection Box - ACDB-125A-125A-1-1 - 125A 3PH, with Power Analyser German and Dutch Installation Manuals still pending from the manufacturer. UK: Please note that a slight adjustment was required on the G99 report which has resulted in S5-GC range temporarily losing their G99 approved status. The updated form has already been resubmitted to the ENA and is currently awaiting assessment. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.  Supplier Part No: SOL-S5-GC60K-DC Weight: 54.5 kg Rated Power: 60,000 W Min PPT Voltage: 195 V Max PPT Voltage: 1,000 V DC Startup Voltage: 195 V DC Shutdown Voltage: 180 V Max Input Voltage: 1,100 V Max DC Power: 90,000 W Max AC Power (5 Minutes): 66,000 W Surge AC Power (1 Second): 66,000 W Max DC Current: 192 A Max DC Inputs: 12 Has DC Fuses: 0 Connector: MC4   Included Connectors: 24 Euro Efficiency: 98.4 % Transformer: None MPPT Quantity : 6 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: SE-30000-SPD-RSD Inverters - Main Units Rating: 30,000W Phases: 3 Three Phase Inverter, 30kW, Glands, DC safety unit with switch, AC & DC SPD, Fuses, RSD, Inverters with SetApp configuration SE30K-RWR0IBNZ4 These are outstanding inverters for medium to large commercial rooftop and ground mount installs Product Features Built-in module level monitoring with Ethernet, wireless and GSM communication Easy config using smartphone and SolarEdge SetApp Small and light to install Type 2 DC and AC surge protection Arc Fault protection IP65 DC safety unit for external DC Isolators   Supplier Part No: SE30K-RWR0IBNZ4 Weight: 36.5 kg Rated Power: 30,000 W Min PPT Voltage: 13 V Max PPT Voltage: 60 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 1,000 V Max DC Power: 45,000 W Max AC Power (5 Minutes): 29,990 W Surge AC Power (1 Second): 29,990 W Max DC Current: 43.5 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 98 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years

Read more less

Part No: X3-MEGA-60K Inverters - Main Units Rating: 60,000W Phases: 3 X3-MEGA-60K Superior Efficiency Max efficiency 98.3%, European efficiency 98.0% 4 independent MPPTs ECO Invention patent technology High Reliability Top-ranking high quality components Integrated type II DC &AC surge arresters Intelligent Maintenance Intelligent monitoring via APP & Web Multiple-string monitoring for easy trouble shooting (Optional) Excellent Grid Compatibility Advanced grid impedance algorithm for large-scale power stations Active power/reactive power control option (Remotely) When installing under G100 there is a requirement to install Solax Chint Three Phase Meter to be compliant.   Supplier Part No: X3 Mega 60kW Weight: 67 kg Rated Power: 60,000 W Min PPT Voltage: 200 V Max PPT Voltage: 960 V DC Startup Voltage: 200 V DC Shutdown Voltage: 200 V Max Input Voltage: 1,000 V Max DC Power: 78,000 W Max AC Power (5 Minutes): 60,000 W Surge AC Power (1 Second): 60,000 W Max DC Current: 156 A Max DC Inputs: 12 Has DC Fuses: 0 Connector: MC4   Included Connectors: 2 Euro Efficiency: 98 % Transformer: None MPPT Quantity : 12 Has Integrated DC Switch: No Warranty: 5 years

Read more less

Part No: SOL-S5-GC50K-DC Inverters - Main Units Rating: 50,000W Phases: 3 S5-GC50K - Series 5 Three Phase Grid-Tied Inverter Product Features Max. efficiency of 98.7%  Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 195V and max PV input voltage of 1100V Max PV DC Power of 75kW 32A input per MPPT, 16A input for each PV string Maximum output power of 55kW 5 MPPT design with precise MPPT algorithm, with 2 DC inputs per MPPT effectively reducing string mismatch Intelligent monitoring, Smart I-V Curve Diagnosis Integrated AFCI (DC arc-fault circuit protection) IP66 Rated and C5 Anti-Corrosion Level Integrated DC switch for emergency shut-down of PV power or safe PV maintenance DC reverse-polarity protection Supports PLC/GPRS/WiFi communication with less wiring and reduced installation costs 5-year standard warranty Register on SolisCloud, to support remote upgrade and control. NRS-097-2-1 Certified German and Dutch Installation Manuals still pending from the manufacturer. UK: Please note that a slight adjustment was required on the G99 report which has resulted in S5-GC range temporarily losing their G99 approved status. The updated form has already been resubmitted to the ENA and is currently awaiting assessment. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.  Supplier Part No: SOL-S5-GC50K-DC Weight: 54.5 kg Rated Power: 50,000 W Min PPT Voltage: 195 V Max PPT Voltage: 1,000 V DC Startup Voltage: 195 V DC Shutdown Voltage: 180 V Max Input Voltage: 1,100 V Max DC Power: 75,000 W Max AC Power (5 Minutes): 55,000 W Surge AC Power (1 Second): 55,000 W Max DC Current: 160 A Max DC Inputs: 10 Has DC Fuses: 0 Connector: MC4   Included Connectors: 20 Euro Efficiency: 98.3 % Transformer: None MPPT Quantity : 5 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: SE-25000-SPD-RSD Inverters - Main Units Rating: 25,000W Phases: 3 Three Phase Inverter, 25kW, Glands, DC safety unit with switch, AC & DC SPD, Fuses, RSD, Inverters with SetApp configuration SE25K-RWR0IBNZ4 These are outstanding inverters for medium to large commercial rooftop and ground mount installs Product Features Built-in module level monitoring with Ethernet, wireless and GSM communication Easy config using smartphone and SolarEdge SetApp Small and light to install Type 2 DC and AC surge protection Arc Fault protection IP65 DC safety unit for external DC Isolators   Supplier Part No: SE25K-RWR0IBNZ4 Weight: 36.5 kg Rated Power: 25,000 W Min PPT Voltage: 750 V Max PPT Voltage: 1,000 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 1,000 V Max DC Power: 37,500 W Max AC Power (5 Minutes): 25,000 W Surge AC Power (1 Second): 25,000 W Max DC Current: 36.25 A Max DC Inputs: 4 Has DC Fuses: 8 Connector: MC4   Included Connectors: 4 Euro Efficiency: 98 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years

Read more less

Part No: SE-25000-R4-APP Inverters - Main Units Rating: 25,000W Phases: 3 Solar Edge 25000 3phase inverter with DC safety switch and DC surge protection (type II) and DC fuses (+/-) with Set APP function (no display) SE25K-RW00IBNR4 THIS INVERTER HAS NO TRACKERS AND REQUIRES POWER OPTIMIZERS TO FUNCTION. The SolarEdge inverters combine a sophisticated, digital control technology and a one stage, efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability. The fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage, regardless of the number of modules in a string or environmental conditions. Please note: This inverter does not have a display. It is a new Comms Board version and set up and commissioning need to be done using Solar Edge SetAPP mobile application.   Supplier Part No: SE25K-RW00IBNR4 Weight: 40 kg Rated Power: 25,000 W Min PPT Voltage: 750 V Max PPT Voltage: 1,000 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 1,000 V Max DC Power: 37,500 W Max AC Power (5 Minutes): 25,000 W Surge AC Power (1 Second): 25,000 W Max DC Current: 36.25 A Max DC Inputs: 4 Has DC Fuses: 8 Connector: MC4   Included Connectors: 0 Euro Efficiency: 98 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years

Read more less

Part No: X3-MEGA-50K Inverters - Main Units Rating: 50,000W Phases: 3 X3-MEGA-50K Superior Efficiency Max efficiency 98.3%, European efficiency 98.0% 4 independent MPPTs ECO Invention patent technology High Reliability Top-ranking high quality components Integrated type II DC &AC surge arresters Intelligent Maintenance Intelligent monitoring via APP & Web Multiple-string monitoring for easy trouble shooting (Optional) Excellent Grid Compatibility Advanced grid impedance algorithm for large-scale power stations Active power/reactive power control option (Remotely) UK ONLY: Due to a slight change in the regulations relating to G98 and G99, some manufacturers have had to resubmit their type test certificates for reassessment with the ENA. This may lead to some delays in the processing of applications, but we have been reassured by manufacturers they do not anticipate this to delay applications beyond a few weeks. Segen have not been involved in this process and are unable to provide timescales or dates as to when this works will be completed. Due to our current high volume of calls we would kindly ask you to refrain contacting your AM regarding these timescales. Supplier Part No: X3 Mega 50kWWeight: 65 kgRated Power: 50,000 WMin PPT Voltage: 200 VMax PPT Voltage: 960 VDC Startup Voltage: 200 VDC Shutdown Voltage: 250 VMax Input Voltage: 1,000 VMax DC Power: 65,000 WMax AC Power (5 Minutes): 50,000 WSurge AC Power (1 Second): 55,000 WMax DC Current: 130 AMax DC Inputs: 3Has DC Fuses: 0Connector: MC4 Included Connectors: 2Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 2Has Integrated DC Switch: NoWarranty: 5 years Click Here For Specs 

Read more less

Part No: X1-3000T Storage Systems - Hybrid Inverter X1-Hybrid HV Single Phase The third generation of the X1-Hybrid Storage Inverter is the latest to be released from SolaX and has a range of new features such as built-in EPS output that enables the end user to run off their batteries in the event of a power cut, Export Control making it possible to limit exported power and advanced connectivity making it suitable for grid-trading applications. Other features like easy remote access with monitoring using the SolaX app – Xcloud, makes it very user (and installer) friendly while the industry-leading 10-year warranty gives great peace of mind. Additional features: High voltage battery support means thinner cables are required 6kW Max charge/discharge Wifi or LAN stick available separately G100 Export Limitation compliant Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Please note the minimum number of batteries per X1 Hybrid inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria.   Supplier Part No: X1-Hybrid 3000E Weight: 26.9 kg Rated Power: 3,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 Minutes): 3,300 W Surge AC Power (1 Second): 6,000 W Max DC Current: 24 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 10 years Data Sheet Solax X1 G3 Hybrid 2021

Read more less

 Part No: X1-FIT-G4-5.0 Storage Systems - Charger-Inverter X1 RetroFit AC Charger Upgrade a PV system with the X1 RetroFit AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 6kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of Solax batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Supplier Part No: X1-FIT-5.0 Charger G4 Weight: 24.5 kg Rated Power: 5,000 W Data Sheet Solax X1 Fit EN

Read more less

Part No: X1-HYBRID-G4-5.0-V2 Storage Systems - Hybrid Inverter G4 HV Single Phase Hybrid Inverter And Charge Controller This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment Supplier Part No: X1 G4- Hybrid 5.0 D with Wi-Fi Weight: 28 kg Rated Power: 5,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,500 W Surge AC Power (1 Second): 5,501 W Max DC Current: 28 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 10 years Data Sheet Solax X3-Hybrid G4.1

Read more less

Part No: X1-HYBRID-G4-3.7 Storage Systems - Hybrid Inverter G4 HV Single Phase Hybrid Inverter and Charge controller range This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Max DC Current: 28 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 10 years Data Sheet G4 Hybrid

Read more less