Cable & Connectors

Cable Pack For The Pylon US2000/3000 Each battery includes connection cables, these cables should be used for connection to the charger. One cable pack per system to a max of 5 2 x 2m long power cables 1 x 3.5m RJ45 Communication cable (Not for CAN communication)  

Read more less

Part No: GIV-BAT-CAB-G1-G2 Storage Systems - Battery Cable This product is currently only available as sold in a package with battery and inverter. Will be refunded if purchased separately.  The GivEnergy Gen 2 range uses a new 'all in one' type connector which is in contrast to Generation 1 that uses ring terminals.  When connecting a Generation 1 product to a Generation 2 product you must ensure the correct cables are used due to to the differing connection ports. If you connect a Generation 1 hybrid to a Generation 2 battery (or a Gen 2 hybrid with a Gen 1 battery) you must use GIV-BAT-CAB-G1-G2 (G1 to G2 interface) When connecting a Generation 2 product to a Generation 2 product you can use GIV-BAT-CAB-G2-G2 (G2 to G2 interface) Currently this product is limited to 1 per relevant GivEnergy battery/charger combination Supplier Part No: Gen 1 to Gen 2 cable Weight: 0.5 kg  

Read more less

Battery connection cable for GivEnergy products. The all-in-one connection at both ends to connect the  range of GivEnergy batteries to a Gen3 inverter or to another battery in parallel. This cable is for: Connecting a 9.5kWh Battery to another Givenergy Battery Connecting a 9.5 Battery to a Gen1 Inverter (one end will need to replaced with Ring Connectors.  

Read more less

Part No: SUN-CABLE-PACK Storage Systems - Accessory Inverter to Battery long cable pack.  Supplier Part No: Battery Cable Pack Long for Sunsynk Weight: 1 kg

Read more less

Part No: FE-CABLE Storage Systems - Accessory LV5200 battery cable accessory kit for use with the LV5200 model. Each battery unit includes the interlink battery solar cables for parallel connection to another battery, whereas this pack is for connecting to the charger. You require one cable pack per system, with a maximum of 4 batteries when used with a 5kW or smaller system, one cable pack is required per battery when used on a larger than 5kW.   This cable pack includes the following solar cables: 1 x 2m long power cable set (positive and negative) with applicable connector 1 x 3m RJ45 Communication cable Supplier Part No: 5.2/5200 DC cable Weight: 1 kg User Manual Fox LV5200

Read more less

Part No: SUN-CABLE-SHORT Storage Systems - Accessory Battery to Battery short cable pack.  For Sunsynk CATL battery only.  Does not work with Sunsynk BYD battery.    Supplier Part No: Battery Cable Pack Short for Sunsynk Weight: 0.2 kg Length: 0.3 m

Read more less

Part No: KE8073-0100 Mounting - Cable Flashings Klober’s Solar Cable Outlet Kit The flashing kit creates a watertight seal around cables which pass through the roof. Use in conjunction with Klober’s Sealing Collar to create a wind- and airtight seal around the penetration. Product features & benefits -Provides watertight lead-through for cables which pass through the roof -8 Cable Insert allows additional cables to be added -Foam strip and sealing bar provide perfect barrier against driving rain -Fully wind-tunnel tested -Available in 3 colours to match the roof -Slate Cable Kit also available -Sealing Collar creates airtight seal around cables passing through the roof.   Supplier Part No:KE8073-0100 Weight:1.5 kg

Read more less

Part No: MC4-EVO2-CONN86-2-PACK Cables - Connectors This part is made up of the following items: 2 x MC4-EVO2-FEM1 MC4-Evo2 1500V DC Female Connector 0086 Small - Single   2 x MC4-EVO2-MAL1 MC4-Evo2 1500V DC Male Connector 0087 Small - Single   The MC4-Evo2 is the latest addition to the Stäubli Electrical Connectors PV connector portfolio. Internationally certified with IEC, UL, JET, cTÜVus. 1xMale, 1xFemale. Approved for 1500 V DC (IEC) Rated current: 45A 4mm2 and 53A 6mm2 cables MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) Supplier code: 32.0086P0001-UR and 32.0087P0001-UR    - for use with 4mm2 & 6mm2 with an outside diameter of 4.7mm-6.4mm (including insulating part)   DII comes with Grey seal.   PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL, AVAILABLE HERE.  THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR.   Weight:0.062 kg

Read more less

Part No: JA-QC4-10-35-1500V Cables - Connectors   Rated 1500V DC QC4.10-35 connector pair – Male and Female Required to comply with ‘IEC 62548:2016 - Photovoltaic (PV) arrays - Design Requirements’ regarding DC connectors inter-compatibility when using JA Solar modules supplied with QC4 connectors.   Supplier Part No:QC4.10-35 Connector Weight:0.03 kg

Read more less

Part No: CABLE6-1-500-R Cables - DC Cables APPLICATION -Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/ A1, and is tested for durability according to EN 60216.   Supplier Part No:CABLE6-1-500-R Weight:42 kg Length:500 m Area:6 mm2 Colour:Red Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE4-1-500-R Cables - DC Cables APPLICATION -Updated harmonized (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/ A1, and is tested for durability according to EN 60216.   Supplier Part No:CABLE4-1-500-R Weight:30 kg Length:500 m Area:4 mm2 Colour:Red Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE6-1-100-R Cables - DC Cables   Supplier Part No:E6S10060BK100 Weight:7.63 kg Length:100 m Area:6 mm2 Colour:Red Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE6-1-1000 Cables - DC Cables 6 mm², single-core, black, 1000m NEW H1Z2Z2-K certified 1000m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human    Supplier Part No:CABLE6-1-1000 Weight:74 kg Length:1,000 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: MC4-EVO2-CONN1-2PACK Cables - Connectors The MC4-Evo2 is the latest addition to the Stäubli Electrical Connectors PV connector portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) Connectors 32.0086P0001-UR and 32.0087P0001-UR are used in kit no. 96992   - for use with 4mm2 & 6mm2 with an outside diameter of 4.7mm-6.4mm (including insulating part)   DI comes with Maroon seal. PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL, AVAILABLE HERE.  THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR. The STÄUBLI warranty only applies to products delivered by STÄUBLI and exists only towards the customer of STÄUBLI. It does not apply to any third party purchaser. The warranty covers any manufacturing defects or defects in materials from the delivery date as specified in article 6 and where such products are used under normal operating and maintenance conditions for a period of  one year by default. Supplier Part No:100032572 Weight:0.06 kg

Read more less

Part No: CABLE4-1-100-R Cables - DC Cables 4 mm², single-core, RED, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE4-1-100-R Weight:6 kg Length:100 m Area:4 mm2 Colour:Red Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE6-1-100 Cables - DC Cables 6 mm, single-core, black, 100m NEW H1Z2Z2-K certified 100m solar cable with length label. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to1.5kV between conductors as well as between conductor and earth, and not exceeding1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TiV approved PV1-F cable. H1Z2Z2-KPHOTOVOLTAIC CABLE CONSTRUCTION Conductor Flexible tinned copper (Class 5) Insulation Halogen-free cross-linked compound Outersheath Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TïV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE6-1-100 Weight:8.5 kg Length:100 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE10-1-500 Cables - DC Cables 10 mm², single-core, Black, 500 m Cross section: 10 mm² System voltage: 1800 V Rated current: 98 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. This Cable is Double Insulated. Colour: Black Keywords: CABLE101500, Eland, PV Cable, DC Cable   Supplier Part No:E6S10500BL500 Weight:65 kg Length:500 m Area:10 mm2 Colour:Black Cores:1 - N Max Current:57 Max Voltage:1800

Read more less

Part No: CABLE6-1-50 Cables - DC Cables APPLICATION -Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. -Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/A1, and is tested for durability according to EN 60216.     Supplier Part No:CABLE6-1-50 Weight:3.815 kg Length:50 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE4-1-50-R Cables - DC Cables   Supplier Part No:CABLE4-1-50-R Weight:2.86 kg Length:50 m Area:4 mm2 Colour:Red Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE6-1-250 Cables - DC Cables 6 mm², single-core, black, 250m NEW H1Z2Z2-K certified 250m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE6-1-250 Weight:19.8 kg Length:0.29 m Length:250 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CS-T4-PC-1-PAIR-1500V Cables - Connectors Tlian T4-PC-1 CONNECTOR 1500V PRODUCT OVERVIEW T4-PC-1 connectors use high quality materials that guarantee long-term reliability. Lower contact resistance and higher current transfer capability ensure high product efficiency. T4-PC-1 connectors have IP68 water-proof rating and can be used in a wide operating temperature range from -40 °C to 90 °C. Cable OD 4.3-6.6mm, 6.7-7.5mm(Large) Conductor cross section 4mm2/6mm2 (12AWG/10AWG) CERTIFICATIONS IEC 62852: TÜV-Rheinland / CE UL 6703: CSA Compliance with RoHS, REACH and NEC (no locking sleeve required) DC connectors to match factory fitted connectors on Canadian Solar modules.    Supplier Part No:CS-T4-PC-1-PAIR-1500V Weight:0.04 kg

Read more less

Part No: CABLE4-1-1000 Cables - DC Cables 4 mm², single-core, black, 1000m 1000m solar cable with length label. Supplied on a reusable spool. Conductor cross-section: 4 mm² (this is not the cable diameter, but rather the cross-sectional area).  System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.    Supplier Part No:SOLAR1X4BK Weight:60 kg Length:1,000 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-100-Grey Cables - DC Cables 4 mm², single-core, Grey, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Red cables are also available.    Supplier Part No:CABLE4-1-100-Grey Weight:5.755 kg Length:100 m Area:4 mm2 Colour:Grey Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE10-1-100 Cables - DC Cables 10 mm², single-core, black, 100m 100m solar cable with length label. Supplied on a reusable spool. Conductor cross-section: 10 mm² (this is not the cable diameter, but rather the cross-sectional area).  System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.    Supplier Part No:CABLE10-1-100 Weight:13.42 kg Length:100 m Area:10 mm2 Colour:Black Cores:1 - N Max Current:57 Max Voltage:1800

Read more less

Part No: CABLE6-1-25 Cables - DC Cables 6 mm², single-core, black, 25m NEW H1Z2Z2-K certified 25m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE6-1-25 Weight:1.87 kg Length:25 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE4-1-100-Brown Cables - DC Cables 4 mm², single-core, Brown, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Red cables are also avaialble,   Supplier Part No:CABLE4-1-100-Brown Weight:5.74 kg Length:100 m Area:4 mm2 Colour:Brown Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE6-1-2 Cables - DC Cables APPLICATION -Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/ A1, and is tested for durability according to EN 60216.   Supplier Part No:CABLE6-1-2 Weight:0.14 kg Length:2 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: EN-Q-CONN-R-1F Cables - Connectors Field-Wireable Connectors   Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types   Supplier Part No:Q-CONN-R-10F Weight:0.05 kg

Read more less

Part No: CABLE6-1-500 Cables - DC Cables 6 mm², single-core, black, 500m 500m solar cable with length label. Supplied on a reusable spool. Conductor cross-section: 6 mm²  (this is not the cable diameter, but rather the cross-sectional area).  System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.  Important Alternative cable is BC-CABLE6-1-500 Supplier Part No:26038 Weight:38 kg Length:500 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE6-1-2-R Cables - DC Cables APPLICATION -Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/ A1, and is tested for durability according to EN 60216.   Supplier Part No:CABLE6-1-2-R Weight:0.14 kg Length:2 m Area:6 mm2 Colour:Red Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: MC4-5M-2 Cables - Pre Terminated Cables Keywords: MC4 10M2, 1xMale, 1xFemale each cable, MC4. Stäubli, PV Cable, Pre Terminated Cable Please note: 6mm cable may be subsituted at the 4mm price when 4mm cable is out of stock.   A mix of 4 and 6mm will be provided   Supplier Part No:100038568 Items in this pack:2 Weight:0.58 kg Length:5 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:44

Read more less

Part No: MC4-EVO2-10MM-CONN-2PACK Cables - Connectors The MC4-Evo2 10mm2 is the latest addition to the Stäubli Electrical Connectors PV connector portfolio. Internationally certified with IEC, UL, JET, cTÜVus. Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) A pack of 2x MC4-EVO2 10mm Male and 2x MC4-EVO2 10mm Female cable couplers (including insulating part). This part is for use with 10mm2  (8 AWG) DC cable ONLY.    Supplier Part No:100032354 Weight:0.05 kg

Read more less

Part No: MC4-10M-2PACK Cables - Pre Terminated Cables This part is made up of the following items: 2 x MC4-10M-1 MC4 Pre terminated cable 10m (1 Pack)   2x10m cable, 1xMale, 1xFemale each MC4 Pre-terminated. Keywords: MC410M2, Stäubli, PV Cable, Pre Terminated Cable   Weight:1.16 kg Length:10 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:44

Read more less

Part No: EN-Q-25-10-3P-1 Cables - Cables Enphase Q Cable 3ph 1.3m Portrait (price per connector)   Supplier Part No:Q-25-10-3P-200 Weight:0.32 kg

Read more less

Part No: CS-T4F-PC1-MC4M Cables - MC4 Jumper Cable Female Positive Tlian T4 PC1 connector to Staubli Male Negative MC4 connector jumper cable -300mm length.    Canadian Solar part code: 11006357 T4PC1P-MC4N  300mm  IEC1KV&UL1KV   Supplier Part No:CS-T4F-PC1-MC4M Weight:0.05 kg

Read more less

Part No: CABLE4-1-250 Cables - DC Cables 4 mm², single-core, black, 250m NEW H1Z2Z2-K certified 250m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE4-1-250 Weight:14.81 kg Length:250 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-100 Cables - DC Cables 4 mm², single-core, black, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.     Supplier Part No:CABLE4-1-100 Weight:5 kg Length:100 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: MC4-EVO2A-0317-MAL Cables - Connectors The MC4-Evo2A is the latest addition to the Stäubli Electrical Connectors PV connector portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) MC4-EVO2 Male cable coupler as individual part (including insulating part)   PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL, AVAILABLE HERE.  THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR.     DI comes with Maroon seal. Supplier Code: 32.0317P0001   Supplier Part No:32.0317P0001 Weight:0.02 kg

Read more less

Part No: MC4-EVO2A-0316-FEM Cables - Connectors The MC4-Evo2A is the latest addition to the Stäubli Electrical Connectors PV connector portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) MC4 Evo 2 Female cable coupler as individual part (including insulating part)   PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL, AVAILABLE HERE.  THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR.       DI comes with Maroon seal. Supplier Code: 32.0316P0001   Supplier Part No:32.0316P0001 Weight:0.013 kg

Read more less

Part No: MC4-10M-2 Cables - Pre Terminated Cables Keywords: MC410M2, 1xMale, 1xFemale each cable, MC4. Stäubli, PV Cable, Pre Terminated Cable Please note: 6mm cable may be subsituted at the 4mm price when 4mm cable is out of stock.   Supplier Part No:96401 Items in this pack:2 Weight:1.14 kg Length:10 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:44

Read more less

Part No: MC4-10M-1 Cables - Pre Terminated Cables Keywords: MC410M2, Stäubli, PV Cable, Pre Terminated Cable   Supplier Part No:32.00226-10M21 Weight:0.58 kg Length:10 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:44

Read more less

Part No: EN-Q-25-17-3P-1 Cables - Cables Enphase Q Cable 3ph 2.0m Landscape 60-cell (price per connector)   Supplier Part No:Q-25-17-3P-160 Weight:0.412 kg

Read more less

Part No: MC4-SPL-2 Cables - Connectors MC-4 contact doubler - Pack of 2 Pairs MC-4 splitter kit, consisting of: 2 x MC-T splitter sockets (2 x female connectors, 1 x male connector) 2 x MC-T4 splitter plugs (2 x male connectors, 1 x female connector) For time-saving, safe contact duplication without additional connectors. Branch connectors.  Keywords: MC4SPL2, Stäubli, PV Cable   Supplier Part No:95036 Weight:0.25 kg

Read more less

Part No: EN-Q-CONN-R-1M Cables - Connectors Field-Wireable Connectors   Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types   Supplier Part No:Q-CONN-R-10M Weight:0.05 kg

Read more less

Part No: EN-Q-DCC-2-INT Cables - Connectors Enphase DC adaptor to MC4 (max voltage 100V DC).  Single part.  The DC adaptor is already included with the IQ7 inverter range. This partno is the adaptor on its own in case of needing to replace a damaged or lost one.    Supplier Part No:Q-DCC-2-INT Weight:0.07 kg

Read more less

Part No: CABLE4-1-500 Cables - DC Cables 4 mm², single-core, black, 500m NEW H1Z2Z2-K certified 500m solar cable with length label. Supplied on a reusable spool. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:26036 Weight:30 kg Length:500 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-25 Cables - DC Cables 4 mm², single-core, black, 25m NEW H1Z2Z2-K certified 25m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE4-1-25 Weight:1.365 kg Length:25 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: MC4-CAP-FEMALE Cables - Accessories Snap-in lock     Supplier Part No:32.0717 Weight:0.001 kg

Read more less