Log in For Existing Trade Customers

Sunamp Thermino 150 i

Description

 

Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.

The Thermino 150 i would typically be installed in a 1-2 bedroom property.

Note, the Sunamp is very heavy:

  • Tilting it beyond 45 degrees may damage the unit and void your warranty.

 

Power Inputs: Grid electricity Secondary Source

Boiler
 Primary Source

Solar Panels

Heat Pump
 Some high temp


General Specifications

Product Code DKP-CBW-AVZ-1
Equivalent energy storage 7.0kWh
Equivalent hot water capacity 142L
Water available at 40°C 185L
Weight in use 136kg
Height 640mm
Width 365mm
Depth 575mm
Storage core warranty 10 Years
Other parts warranty 2 Years

Technical Specifications

Standing heat loss 28.1W
Energy efficiency rating A+
Recommended flow rate 15LPM
Minimum supply pressure 1.5 bar
Maximum supply pressure 10 bar
Connected load at 230v, 50hz 2,800W

Product form

  Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a... Read more

Low Stock Levels

Login to see prices

  • Quality
  • Reliabilty
  • Trusted

Description

 

Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.

The Thermino 150 i would typically be installed in a 1-2 bedroom property.

Note, the Sunamp is very heavy:

  • Tilting it beyond 45 degrees may damage the unit and void your warranty.

 

Power Inputs: Grid electricity Secondary Source

Boiler
 Primary Source

Solar Panels

Heat Pump
 Some high temp


General Specifications

Product Code DKP-CBW-AVZ-1
Equivalent energy storage 7.0kWh
Equivalent hot water capacity 142L
Water available at 40°C 185L
Weight in use 136kg
Height 640mm
Width 365mm
Depth 575mm
Storage core warranty 10 Years
Other parts warranty 2 Years

Technical Specifications

Standing heat loss 28.1W
Energy efficiency rating A+
Recommended flow rate 15LPM
Minimum supply pressure 1.5 bar
Maximum supply pressure 10 bar
Connected load at 230v, 50hz 2,800W

Forgot Password

Welcome to PowerlandB2B

Back to top

alert("he");