Solar Fitting & Mounting Kits

Part No: REN-420271 Mounting - Fixings Attachement to fix optimiser/microinverter to Renusol Variosole + rail or Metasole plates.    Supplier Part No:420271 Weight:0.045 kg

Read more less

Part No: ER-US-6.3-70-BW-BX Mounting - Wood Screws Self-drilling Universal Screw, Buildex 14-11 x 70 Hex Head Zips Climaseal 5 with 16 mm ABW Supplier Part No: ER-US-6.3-70-BW-BX Weight: 0.002 kg

Read more less

Part No: SLT-131121-901 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131121-901 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Black

Read more less

Part No: ESD-1000670 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1000670 Weight: 0.016 kg

Read more less

Part No: GSE-SCREW-BLA Mounting - Wood Screws This is a single screw and washer.  Keywords: GSESCREWBLA, GSE, PV Mounting, In Roof, gse in roof   Supplier Part No: ART101552 Weight: 0.01 kg

Read more less

Part No: ESD-1008085 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1008085 Weight: 0.008 kg

Read more less

Part No: SLT-113009-003 Mounting - Roof Anchor- Trapezoidals SINGLEFIX The universal trapezoidal sheet fastener for steel and aluminium sheet from 0.5 mm.     SingleFix Pro for corrugation heights from 22 mm (1 piece).    Screws must be ordered separately as needed (2 pieces for each SingleFix Pro)   Used in connection with Solo mounting rails The easy solution for mounting in Portrait on IBR roofs. This part No represents one of Singlefix plate SLT-113009-003 x 1 Correctly designed fixing requires 2x plates and 4x metal screws and needs to be attached to mounting rail. Note : Screws needs to be purchased seperately SLT-943000-360 Supplier Part No: 113009-003 Weight: 0.035 kg PV Light: R2+

Read more less

Part No: REN-900007 Mounting - Fixings Hammerhead bolt M8x25 Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 900007 Weight: 0.018 kg

Read more less

Part No: ER-C-U30-46-B Mounting - Module Clips Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers.   Supplier Part No: CU30-46-B Weight: 0.072 kg Clip Type: 199 Clip H: 46 mm Clip B1: 0 mm Clip Colour: Black

Read more less

Part No: SLT-109008-003 Mounting - Roof Anchor- Tile & Slates Designed particularly for Roof hooks which are not available as a rapid version. Replacement for KlickTop connectors. RapFix attachment allows easy connection of rail to the roof hook.     Supplier Part No: 109008-003 Weight: 0.1 kg

Read more less

Part No: SLT-119001-020 Mounting - Roof Anchor- Hanger Bolts Hanger bolt KlickTop extension part for hanger bolt For M10 / M12 hanger bolts, loose, aluminium   Supplier Part No: 119001-020 Weight: 0.11 kg PV Light: R2+

Read more less

Part No: SLT-943410-025 Mounting - Fixings square headed screw to fix in flange nut   Supplier Part No: 943410-025 Weight: 0.02 kg

Read more less

Part No: ESD-1008063 Mounting - Pitched Roof The Clickfit Evo roof hook filler rubber is made of high quality EPDM rubber. The balanced composition will dry out and prevent cracking. The rubber seal ensures a stable location of the Clickfit Evo roof hook on the roof tile. Placing an outflow rubber lowers the point load and makes superfluous unnecessary for pans with a water barrier. This keeps the flood defense and the strength of the roof tile intact. By folding the rubber a space of 5 to 15 mm can be filled.   Supplier Part No: 1008063 Weight: 0.033 kg

Read more less

Part No: SLT-131101-901 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131101-901 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Black

Read more less

Part No: SLT-131121-001 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131121-001 Weight: 0.049 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver  

Read more less

Part No: REN-420082 Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420082 Weight: 0.062 kg Clip Type: 199 Clip H: 51 mm Clip B1: 10.8 mm Clip Colour: Silver

Read more less

Part No: SLT-942208-080 Mounting - Wood Screws Galvanised Flat Head TORX 8x80 Wood Screw.   Supplier Part No: 942208-080 Weight: 0.022 kg

Read more less

Part No: SLT-943000-360 Mounting - Fixings Thin sheet metal screw 6.0 x 25 mm self-tapping with A2 sealing washer. For use with: ClampFit Fastener SLT-130004-200 -2 screws required per piece SingleFix-V Solo SLT-113009-003 - 2 screws required per piece   Supplier Part No: 943000-360 Weight: 0.005 kg

Read more less

Part No: SLT-943208-100 Mounting - Wood Screws WOOD SCREW 8 x 100 mm Wood screw with plate head, VA - Stainless steel   Supplier Part No: 943208-100 Weight: 0.026 kg

Read more less

Part No: ER-I-PRO-02 Mounting - Roof Anchor- Tile & Slates The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.   Supplier Part No: I-PRO-02 Weight: 0.37 kg

Read more less

Part No: ESD-1008020 Mounting - Pitched Roof The Clickfit Evo universal module clamp is made of high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The module clamp comes standard assembled and is suitable for all framed solar panels with a thickness between 30 and 50 mm. Due to the clever design it can be used as a middle clamp and - in combination with the end cap - also as end clamp. The design also provides for potential equalization between the solar panels. The universal module clamp bites through the anodization layer of the solar panel and ensures that the solar panels are interconnected when the system is to be grounded. The clamps are standard equipped with theft delay screws and are available in the colors black and gray.   Supplier Part No: 1008020 Weight: 0.059 kg

Read more less

Part No: ESD-1008064 Mounting - Pitched Roof The Clickfit Evo installation aid is made of high-quality UV-stabilized plastic composite and is resistant to the prolonged exposure to sunlight and other weather influences. When using the installation aid, the solar panel can be hung on the ClickFit mounting rail. During the transfer of the solar panels, the cables of the solar panel can be clicked into the mounting aid. This provides considerable ease of assembly and contributes to working on the roof. The mounting aid is clicked into the existing mounting holes of the solar panel and is suitable for all solar panels.   Supplier Part No: 1008064 Weight: 0.01 kg

Read more less

Part No: REN-420082-B Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420082-BE Weight: 0.06 kg Clip Type: 199 Clip H: 51 mm Clip B1: 10.8 mm Clip Colour: Black

Read more less

Part No: ESD-1008045 Mounting - Pitched Roof Quick & flexible installation with the ClickFit EVO Universal Roof Truss Universal Roof Truss for all roof tile/batten combinations Easy mounting process from the top Stepless adjustment of height and width Better point load distribution, lower risk of tile breakage and leakage Self-aligning click connection: easier and faster Can be used for horizontal and vertical mounting Integrated cable management.   Supplier Part No: 1008045 Weight: 0.601 kg

Read more less

Part No: ESD-1008040 Mounting - Pitched Roof Quick & flexible installation with the ClickFit EVO Universal Roof Hook Universal Roof Hook for all roof tile/batten combinations Easy mounting process from the top Stepless adjustment of height and width Better point load distribution, lower risk of tile breakage and leakage Self-aligning click connection: easier and faster Can be used for horizontal and vertical mounting - Integrated cable management.   Supplier Part No: 1008040 Weight: 0.503 kg

Read more less

Part No: SLT-100001-000 Mounting - Roof Anchor- Tile & Slates Schletter Standard Roof hooks Universal Roof hook In stainless steel quality Variable bar arrangement Adjustable at the front and rear Middle bar can be set in three different positions Wood screws or rail attaching parts (square head bolts M10 × 25 mm and flange nuts or RapFix attachment) must be ordered separately!   Supplier Part No: 100001-000 Weight: 0.97 kg PV Light: R2+

Read more less

Part No: SLT-100001-00R Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x SLT-100001-000 Roof hook Universal   1 x SLT-109008-003 RapFix attachment for Eco Roof hooks   Schletter Standard Roof hook with RapFix   Universal Roof hook with RapFix attachment to allow easy connection of rail.   In stainless steel quality Variable bar arrangement Adjustable at the front and rear Middle bar can be set in three different positions   Wood screws must be ordered separately!   Weight: 1.07 kg PV Light: R2+

Read more less

Part No: REN-420402 Mounting - Roof Anchor- Trapezoidals Renusol Metasole mounting system for trapezoidal/IBR and corrugated sheet metal roofs. This roof anchor is suitable for landscape panel mounting solutions. The roof anchor is suitable for PV systems with framed pv-modules from 30 to 50 mm frame height. Installation is made directly into the metal roofing using self-tapping and thread-forming screws that come as standard with the mounting bracket. If more panel-to-roof clearance is required, the following roof anchor can be used as an alternative: REN-420423   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420402 Weight: 0.08 kg

Read more less

Part No: SLT-943912-010 Mounting - Fixings Flange nut with locking teeth; anti-twist device integrated into the flange,VA DIN6923   Supplier Part No: 943912-010 Weight: 0.01 kg

Read more less

Part No: SLT-129011-000 Mounting - Rail End Caps Plastic grey end cap for the Solo and Profi rails   Supplier Part No: 129011-000 Weight: 0.01 kg PV Light: SLT1,R2+

Read more less

Part No: REN-420081 Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420081 Weight: 0.06 kg Clip Type: 199 Clip H: 50 mm Clip B1: 9.5 mm Clip Colour: Silver

Read more less

Part No: REN-420181 Mounting - Roof Anchor- Tile & Slates Renusol have created roof hooks specifically for the UK market. This roof hook can be used with Flat and Slate tiles, and is compatible with the VarioSole product range.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420181 Weight: 0.72 kg

Read more less

Part No: ESD-1007022-WP Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty Contains mounting in the new metal insert.   Supplier Part No: 1007022-WP Weight: 0.055 kg

Read more less

Part No: ER-I-PRO-01 Mounting - Roof Anchor- Tile & Slates Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers.   Supplier Part No: I-PRO-01 Weight: 0.609 kg

Read more less

Part No: SLT-943000-025 Mounting - Fixings M8X20 - BOLT - SH LS ISO4762 - A2-70 DL Hexagon socket screw with locking teeth.   Supplier Part No: SLT-943000-025 Weight: 0.013 kg

Read more less

Part No: SLT-129002-002 Mounting - Rail Connectors Rail connector for Eco05, Solo, Solo05, FixZ7, FixZ15 profile rails. Solo, SoloPlus connector FixZ-7, FixZ-15, pre-assembled Important Replaced by SLT-129060-000 for SA. Ersetzt durch SLT-129060-000 für SA. Supplier Part No: 129002-002 Weight: 0.17 kg

Read more less

Part No: REN-420081-B Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420081-BE Weight: 0.06 kg Clip Type: 199 Clip H: 50 mm Clip B1: 9.5 mm Clip Colour: Black

Read more less

Part No: ESD-1003022-B Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1003022-B Weight: 0.018 kg

Read more less

Part No: SLT-943914-008 Mounting - Fixings Square nut M8. Compatible with all Schletter system rails in combination with Klick groove and KlickIn click component.   Supplier Part No: 943914-008 Weight: 0.005 kg

Read more less

Part No: SLT-110010-200 Mounting - Roof Anchor- Hanger Bolts Hanger bolts   Roof cladding: Corrugated roofs & trapezoidal sheet Hanger bolts For corrugated sheets (such as those of fiber cement) or trapezoidal sheet metal roofs, so-called fastening kits for corrugated roofs are used, comprising a special hanger bolt with EPDM gasket (will need additional mounting plate). Please note that thread lengths can deviate from the corresponding figures. Hanger bolt kit with vulcanized EPDM gasket (UV-resistant) and 3 high-grade steel flange nuts (V4A), assembled Hanger bolt kit 10 × 200 assembled M10 × 200 mm This hanger bolt is suitable for wood purlins / sub structure.   Supplier Part No: 110010-200 Weight: 0.12 kg PV Light: SLT1

Read more less

Part No: SLT-110010-200-KT Mounting - Roof Anchor- Hanger Bolts This part is made up of the following items: 1 x SLT-119001-020 KlickTopPro attachment for hanger bolt   1 x SLT-110010-200 Hanger bolt kit 10x200 assembled   Weight: 0.23 kg PV Light: SLT1

Read more less

Part No: SLT-129011-900 Mounting - Rail End Caps Plastic grey end cap for the Solo and Profi rails.   Supplier Part No: 129011-900 Weight: 0.007 kg

Read more less

Part No: GSE-SCREW-SIL Mounting - Wood Screws   Supplier Part No: VIS2014A Weight: 0.01 kg

Read more less

Part No: REN-420420 Mounting - Roof Anchor- Trapezoidals SHORT 350mm RAIL Material saving solar installation on trapezoidal sheet. Without continuous rails. Suitable for maximum 320mm distance between centres of raised trapezoidal ridges.  VERTICAL PV MODULE ORIENTATION PV modules with a frame height of 30 to 50 mm are attached to the MS + P mounting system in portrait (standing) on the trapezoidal sheet. INSTALLATION WITHOUT PILOT DRILLING Self-tapping screws fix the MS+P PV mounting system directly to the trapezoidal sheet. FOR TRAPEZOIDAL STEEL AND ALUMINUM METAL SHEET Readymade kits are suitable for the installation of PV systems on trapezoidal sheet steel and / or aluminum in various thicknesses. Metasole Portrait kit: consist of Metasole plates and REN-400281 (SW8 6.0x25 E16) screws.     Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420420 Weight: 0.29 kg

Read more less

Part No: ER-R-PRO-3500 Mounting - Mounting Rails The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.   Supplier Part No: ER-R-PRO3500 Weight: 2.66 kg Length: 3.5 m

Read more less

Part No: ESD-1008061 Mounting - Pitched Roof The Clickfit Evo mounting rail connector is made of high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The coupling piece makes it possible to combine several rails with each other and effortlessly slides into the side of the mounting rail. The ingenious design makes the use of screws superfluous. The combined mounting rails connect seamlessly. Thanks to the mounting rail connector, the carrying capacity and the strength of the mounting system remain unrivaled.   Supplier Part No: 1008061 Weight: 0.252 kg Length: 0.21 m

Read more less

Part No: ESD-1000612 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1000612 Weight: 0.005 kg

Read more less

Part No: SLT-109019-020 Mounting - Roof Anchor- Tile & Slates Sheet metal replacement tiles and roof hook sets for plain tile Rapid including installation set. Please order sheet metal replacement tiles and roof hook sets separately. Compatible with the classic Schletter Solar mounting system and the Schletter ProLine series.   Weight: 0.32 kg PV Light: R2+

Read more less