Smart Products Filter Index - Do not delete

Part No: SOL-S5-GR3P-15K-DC Inverters - Main Units Rating: 15,000W Phases: 3 Series 5 GR3P Three Phase Grid-Tied Inverter Product Features: Max. efficiency of 98.6%  Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 180V and max PV input voltage of 1100V 16A PV string input x 4 Maximum AC output power of 16.5kW  Max PV DC Power of 22.5kW Integrated AFCI (DC arc-fault circuit protection) IP66 Rated  DC reverse-polarity protection 5-year standard warranty Register on SolisCloud, to support remote upgrade and control. NRS-097-2-1 Certified

Read more less

Brand: myenergiItem Code: LIBBI-EK151 Spec sheet The Libbi range was created to store self-generated energy for use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. Through use of the myenergi app, this system can be accessed and controlled from anywhere in the world.Libbi is modular by design to allow a greater deal of flexibility. This item is a cable expansion kit for battery pack. Please note: libbi can only be commissioned by installers who have received libbi specific product training and who are listed on myenergi systems as product champions. Installers will not be able to access myenergi support until libbi training has been completed. Key Features: 3 Year warranty Compatible with other myenergi devices. Can be charged from the grid, optimising dynamic tariffs. Remote access and control.

Read more less

Brand: myenergiItem Code: LIBBI-EK101  Spec sheet The Libbi range was created to store self-generated energy for use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. Through use of the myenergi app, this system can be accessed and controlled from anywhere in the world.Libbi is modular by design to allow a greater deal of flexibility. This item is a cable expansion kit for battery pack. Please note: libbi can only be commissioned by installers who have received libbi specific product training and who are listed on myenergi systems as product champions. Installers will not be able to access myenergi support until libbi training has been completed. Key Features: 3 Year warranty Compatible with other myenergi devices. Can be charged from the grid, optimising dynamic tariffs. Remote access and control.

Read more less

Part No: SUN-16.0 Storage Systems - Hybrid Inverter The 16kW single-phase hybrid inverter is the biggest addition to Sunsynk’s low voltage (48V) single-phase inverter range. It’s suitable for off-grid, grid support, backup, and self-consumption PV systems and can also be used in both three-phase and single-phase parallel applications.  In terms of functionality, compatibility, and related accessories, it’s similar to the 5kW & 8kW units but particularly suited to large domestic and small commercial installations.   “It’s the biggest single phase all-in-one inverter with everything built in, in the world”, Keith Gough, Sunsynk CEO. A true monster!  Additional features:  A total of 15x inverters can be connected in a three-phase configuration (five units per phase) - giving a maximum power output of 240kW  Three inverters can be connected in a single-phase configuration giving a total power of 48kW  Contains 3x MPPTs to allow for flexible PV array designs and improved efficiency  Programmable multiple operation modes: on-grid/off-grid & UPS  IP65 protection rating  Wi-Fi dongle as standard – enabling remote monitoring via the Sunsynk cloud  Compatible with leading lithium battery brands such as Hubble Lithium, Pylontech LV, Freedomwon and Kodak (BL3.6)  Sunsynk inverter and Freedom Won battery pairing : 10-year extended warranty. For installations with Pylontech, REVOV and Hubble Lithium batteries use this BMS cable For installations with Freedom Won batteries use this BMS cable Installations with Sunsynk products need to be registered to gain full activation of the warranty. Register here>> Equipment warranty registration needs to take place within 7 (seven) days of commissioning of the project, failure to register the warranty may result in the warranty being made void.   Supplier Part No: SUNSYNK-16K-SG01LP1 Weight: 56 kg Rated Power: 16,000 W Min PPT Voltage: 250 V Max PPT Voltage: 450 V DC Startup Voltage: 150 V DC Shutdown Voltage: 0 V Max Input Voltage: 450 V Max DC Power: 18,000 W Max AC Power (5 Minutes): 16,001 W Surge AC Power (1 Second): 32,000 W Max DC Current: 66 A Max DC Inputs: 6 Has DC Fuses: 0 Connector: Screw Terminal   Included Connectors: 12 Euro Efficiency: 97.6 % Transformer: None MPPT Quantity : 3 Has Integrated DC Switch: Yes Warranty: 5 years Data Sheet For Sunsynk 16kW

Read more less

Guarantee 5 Years Packaging Types Each Product Range Libbi Unspsc V18 32121705 Weight 52kg   Spec sheet

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: JKM440N-54HL4R-V-BF Panels - Monocrystallines Rating: 440W Efficiency: 22% Width: 1,134mm Height: 1,762mm Tiger Neo N-type 54HL4-(V) 440 Watt Better light trapping and current collection to improve module power output and reliability. The N-type module with Hot 2.0 technology has better reliability and lower LID/LETID. Excellent Anti-PID performance guarantee via optimized mass-production process and materials control. Certified to withstand: wind load (2400 Pascal) and snow load (5400 Pascal). Durability Against Extreme Environmental Conditions, High salt mist and ammonia resistance. 15 Year Product Warranty 30 Year Linear Power Warranty Supplier Part No:JKM440N-54HL4R-V-BF Weight:22 kg Rated Power:440 W MCS Reference:BABT8801-114-440W Length:1,762 mm Width:1,134 mm Depth:30 mm VMPP:32.81 V IMPP:13.41 A Isc:13.86 A Voc:39.38 V Temp. Coefficient (Mpp):-0.3 % Clamp position on panel:Long and short side Connector Type:JK03M Efficiency:22.0 % Pallet Size:Oversized

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: CS6R-400MS-MC4-AB Panels - Monocrystallines Rating: 400W Efficiency: 20.5% Width: 1,134mm Height: 1,722mm HiKU6 High Power Mono module 395W All Black High Efficiency Mono Module (CS6R-400MS-MC4-AB) MORE POWER: Module efficiency up to 20.7 % Lower LCOE & system cost Comprehensive LID / LeTID mitigation technology, up to 50% lower degradation Better shading tolerance MORE RELIABLE: Minimises micro-crack impacts Heavy snow load up to 5400Pa and increased wind load up to 2400Pa Weight: 21.3 Kg Comes with Staubli MC4 Connectors.   Supplier Part No:CS6R-400MS-MC4-AB Weight:21.3 kg Rated Power:400 W MCS Reference:BABT8767-59-400W Length:1,722 mm Width:1,134 mm Depth:30 mm VMPP:30.8 V IMPP:12.99 A Isc:13.85 A Voc:36.8 V Temp. Coefficient (Mpp):-0.34 % Clamp position on panel:Long and short side Connector Type:MC4 Efficiency:20.5 % Pallet Size:Oversized

Read more less

Thermino iPV uses an external heating source (e.g. a boiler) as a main source of heat, and surplus PV energy to provide an AC power supply, which is supplied to the electric heater inside the Heat Battery. This is a great way to add water storage and increase the self-consumption of a PV system. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. Only the Myenergi Eddi can be used as an immersion controller at present. The Thermino 300 iPV would typically be installed in a 4-5 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs:  Grid electricity - Secondary SourceBoiler - Primary SourceSolar Panels - Secondary SourceHeat Pump - Some high temp   General Specifications Product Code DKP-DBW-ATZ-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 284L Water available at 40°C 370L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating A+ Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

Thermino iPV uses an external heating source (e.g. a boiler) as a main source of heat, and surplus PV energy to provide an AC power supply, which is supplied to the electric heater inside the Heat Battery. This is a great way to add water storage and increase the self-consumption of a PV system. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. Only the Myenergi Eddican be used as an immersion controller at present. The Thermino 210 iPV would typically be installed in a 3 bedroom property.   Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs:  Grid electricity - Secondary SourceBoiler - Primary SourceSolar Panels - Secondary SourceHeat Pump - Some high temp   General Specifications Product Code DKP-DBW-ATZ-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 300 Weight in use 187kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32.1W Energy efficiency rating A+ Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

Thermino iPV (UniQ HW +iPV) uses an external heating source (e.g. a boiler) as a main source of heat, and surplus PV energy to provide an AC power supply, which is supplied to the electric heater inside the Heat Battery. This is a great way to add water storage and increase the self-consumption of a PV system. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. Only the Myenergi Eddi an be used as an immersion controller at present. The Thermino 150 iPV would typically be installed in a 1-2 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs:  Grid electricity - Secondary SourceBoiler - Primary SourceSolar Panels - Secondary SourceHeat Pump - Some high temp   General Specifications Product Code DKP-DBW-ATZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 142L Water available at 40°C 185L Weight in use 136kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28.1W Energy efficiency rating A+ Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

 Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 300 i would typically be installed in a 4-5 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp General Specifications Product Code DRP-CBW-AVZ-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 284L Water available at 40°C 370L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating A+ Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

  Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 210 i would typically be installed in a 3 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp General Specifications Product Code DNP-CBW-AVZ-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 300L Weight in use 187kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32.1W Energy efficiency rating A+ Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

  Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 150 i would typically be installed in a 1-2 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp General Specifications Product Code DKP-CBW-AVZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 142L Water available at 40°C 185L Weight in use 136kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28.1W Energy efficiency rating A+ Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

  Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 70 ePV would typically be installed in a studio apartment, or for off-grid applications in a caravan or boat. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp   General Specifications Product Code DGP-CBW-AVZ-1 Energy capacity 3.2kWh Equivalent hot water capacity 71L Water available at 40°C 85L Weight in use 79kg Height 440mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 20W Energy efficiency rating C Recommended flow rate 6LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

  Thermino ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 300 ePV would typically be installed in a 4-5 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump   General Specifications Product Code DRP-BAW-ATY-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 306L Water available at 40°C 436L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating C Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,701kWh/annum

Read more less

Thermino ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 210 e would typically be installed in a 3 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump General Specifications Product Code SNP-BAW-ATY-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 301L Weight in use 178kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32W Energy efficiency rating C Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,690kWh/annum  

Read more less

  Thermino ePV (UniQ eHW +iPV) - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 150 ePV would typically be installed in a 1-2 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump General Specifications Product Code SKP-BAW-ATZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 140L Water available at 40°C 199L Weight in use 139kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28.1W Energy efficiency rating C Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 1,398kWh/annum

Read more less

Thermino 70 ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 70 ePV would typically be installed in a studio apartment, or for off-grid applications in a caravan or boat. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump General Specifications Product Code SGP-BAW-ATZ-1 Energy capacity 3.2kWh Equivalent hot water capacity 74L Water available at 40°C 105L Weight in use 79kg Height 440mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 20W Energy efficiency rating C Recommended flow rate 6LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 542kWh/annum

Read more less

 Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 300 e would typically be installed in a 4-5 bedroom property.   Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications Product Code DRP-AAW-AVZ-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 306L Water available at 40°C 436L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating C Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,701kWh/annum

Read more less

  Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 210 e would typically be installed in a 3 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications - Product Code SNP-AAW-AVZ-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 301L Weight in use 178kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32W Energy efficiency rating C Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,690kWh/annum

Read more less

Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 150 e would typically be installed in a 1-2 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications Product Code SKP-AAW-AVZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 142L Water available at 40°C 199L Weight in use 139kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28W Energy efficiency rating C Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 1,398kWh/annum

Read more less

Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 70 ePV would typically be installed in a studio apartment, or for off-grid applications in a caravan or boat. Note, the Sunamp is very heavy:   Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications Product Code SGP-AAW-AVZ-1 Equivalent energy storage 3.2kWh Equivalent hot water capacity 74L Water available at 40°C 105L Weight in use 79kg Height 440mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 20W Energy efficiency rating C Recommended flow rate 6LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 542kWh/annum

Read more less

Part No: SOLAX-BMS-HV-T58-2-11.6 Storage Systems - Li-ion Battery Pack This part is made up of the following items: 2 x HV11550-58-SLAVE-V2 SolaX Triple Power HV 5.8kWh LFP Extension Battery SLAVE V2   1 x SOLAX-BMS-PB SOLAX BMS Parallel Box   Package of: Solax BMS Parallel Box and SolaX Triple Power 5.8 Slave Battery The Solax BMS Parallel Box is an advanced battery management system that enables seamless parallel connection of multiple batteries, ensuring efficient energy utilisation and enhanced performance. With its cutting-edge technology and robust design, this parallel box is the ideal choice for residential and commercial applications. Included in Kit KIT-SOLAX-X1-3.0 Solax X1 3.0kW Hybrid Kit UK KIT-SOLAX-X1-3.6-AC SolaX 3.6kW AC Coupled Kit UK KIT-SOLAX-X1-5.0 Solax X1 5.0kW Hybrid Kit UK KIT-SOLAX-X3-10 Solax X3 10kW Hybrid Kit UK KIT-SOLAX-X3-8 Solax X3 8.0kW Hybrid Kit UK Weight:149.6 kg Battery Type:Lithium Ion Nominal Energy:11600 Wh Depth of discharge:90.00 % Voltage:230 V Continuous Discharge Rate (Normal Use):5750 W Maximum Discharge Rate (5 Minutes):3500 W Surge Discharge Rate (15 Seconds):800 W Maximum Charge Rate (5 Minutes):3500 W

Read more less

Part No: SE-BATTERY-4.6KWH Storage Systems - Li-ion Battery Pack SolarEdge Home Battery - Low Voltage 4.6kWh module BAT-05K48M0B-01 -Three Phase Inverter Connection Only   DC coupled battery featuring superior overall system efficiency, generating more energy to store and use for on-grid and backup* power application. Scalable solution that enables to stack up multiple battery modules per inverter for increased capacity (up to 23 kWh). Integrates seamlessly with the complete SolarEdge Home ecosystem, offering a single source for warranty, support and training, to streamlined logistics & operations. Solar, storage, EV charging, and smart devices all monitored and managed by a single app for optimized production, consumption, and backup* power. Includes enhanced safety features for battery protection. Simple plug and play installation, with automatic SetApp-based configuration   Weight:54.7 kg Battery Type:Lithium Ion Nominal Energy:4600 Wh Depth of discharge:90.00 % Voltage:48 V Continuous Discharge Rate (Normal Use):4096 W Maximum Discharge Rate (5 Minutes):4096 W Surge Discharge Rate (15 Seconds):4096 W Maximum Charge Rate (5 Minutes):2825 W

Read more less

Part No: X3-FIT-10 Storage Systems - Charger-Inverter Three Phase Retro Fit 10.0kW AC Coupled inverter Product Features Compatible with High voltage batteries IP65 protection rating Natural cooling and low maintenance Max Efficiency up to 96% This is the E version of the inverter with built in EPS function. It required external back up box to fully utilise the EPS function. It can be used with between 2 and 4 Solax Triple Power Batteries (one size batteries per system only) . This inverter can be paralleled up to 5 units per site. Looking to expand your system capacity? See Solax EPS Parallel Box options X3-PBOX-60kW-G2 – Connect up 6 hybrid inverters with a maximum of 60kW X3-PBOX-150kW-G2 – Connect up 10 hybrid inverters with a maximum of 150kW   Supplier Part No:X3-FIT 10.0 Charger Weight:38 kg Rated Power:10,000 W

Read more less

Part No: SE-5000H-NET-AC Storage Systems - Charger-Inverter AC coupled storage inverter with HD-Wave Technology and SetAPP  This inverter can be used directly with SolarEdge Energy Bank or with LG Chem RESU High Voltage battery when combined with StorEdge Interface STI-S4. SolarEdge energy meter and a suitable CT are required for the correct operation of the system. - AC coupling means it’s perfectly suited for sites with 1.      Three-phase SolarEdge PV inverters and 2.      Non-SolarEdge PV inverters or 3.      No PV at all. - Monitor battery status, PV inverter production, and self-consumption data for full visibility - IP65 – Outdoor and indoor installation Please note: This inverter does not have a display; commissioning needs to be done using Solar Edge SetAPP mobile application.   Supplier Part No:SE5000H-RWSACBEN4 Weight:10.96 kg Rated Power:5,000 W

Read more less

Part No: SE-5000H-APP-AC Storage Systems - Charger-Inverter AC coupled storage inverter with HD-Wave Technology and SetAPP  This inverter can be used directly with SolarEdge Energy Bank or with LG Chem RESU High Voltage battery when combined with StorEdge Interface STI-S4. SolarEdge energy meter and a suitable CT are required for the correct operation of the system. - AC coupling means it’s perfectly suited for sites with 1.      Three-phase SolarEdge PV inverters and 2.      Non-SolarEdge PV inverters or 3.      No PV at all. - Monitor battery status, PV inverter production, and self-consumption data for full visibility - IP65 – Outdoor and indoor installation Please note: This inverter does not have a display; commissioning needs to be done using Solar Edge SetAPP mobile application.   Supplier Part No:SE5000H-RWSACBNN4 Weight:10.96 kg Rated Power:5,000 W

Read more less

Part No: X1-AC-3.0 Storage Systems - Charger-Inverter X1 AC Charger Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland.   A LOT BETTER VALUE IF BOUGHT AS A PACKAGE   Supplier Part No:X1-AC-3.0 Charger Weight:18 kg Rated Power:3,000 W

Read more less

Part No: SE-3680H-NET-AC Storage Systems - Charger-Inverter AC coupled storage inverter with HD-Wave Technology and SetAPP  This inverter can be used directly with SolarEdge Energy Bank or with LG Chem RESU High Voltage battery when combined with StorEdge Interface STI-S4. SolarEdge energy meter and a suitable CT are required for the correct operation of the system. - AC coupling means it’s perfectly suited for sites with 1.      Three-phase SolarEdge PV inverters and 2.      Non-SolarEdge PV inverters or 3.      No PV at all. - Monitor battery status, PV inverter production, and self-consumption data for full visibility - IP65 – Outdoor and indoor installation Please note: This inverter does not have a display; commissioning needs to be done using Solar Edge SetAPP mobile application.   Supplier Part No:SE3680H-RWSACBEN4 Weight:7.8 kg Rated Power:3,680 W

Read more less

Part No: SE-3680H-APP-AC Storage Systems - Charger-Inverter AC coupled storage inverter with HD-Wave Technology and SetAPP  This inverter can be used directly with SolarEdge Energy Bank or with LG Chem RESU High Voltage battery when combined with StorEdge Interface STI-S4. SolarEdge energy meter and a suitable CT are required for the correct operation of the system. - AC coupling means it’s perfectly suited for sites with 1.      Three-phase SolarEdge PV inverters and 2.      Non-SolarEdge PV inverters or 3.      No PV at all. - Monitor battery status, PV inverter production, and self-consumption data for full visibility - IP65 – Outdoor and indoor installation Please note: This inverter does not have a display; commissioning needs to be done using Solar Edge SetAPP mobile application.   Supplier Part No:SE3680H-RWSACBNN4 Weight:7.8 kg Rated Power:3,680 W

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: JKM475N-60HL4-V-BF-JK03 Panels - Monocrystallines Rating: 475W Efficiency: 22% Width: 1,134mm Height: 1,903mm Tiger Neo N-Type 60HL4 475 Watt Jinko reaches 23.53% module efficiency with TOPCon, high-efficiency, N-Type TOPCon technology have three main highlights: * Higher bifacial factor will enable a “true” bifacial module * Combination of lower degradation and zero LID and LeTID will significantly reduce generation performance decline over time and exposure to the environment. * Lower temperature coefficient will maximize irradiation meanwhile overcome power loss due to raised heat SMBB Technology: Better light trapping and current collection to improve module power output and reliability. PID Resistance: Excellent Anti-PID performance guarantee via optimized mass-production process and materials control. Enhanced Mechanical Load: Certified to withstand: wind load (2400 Pascal) and snow load (5400 Pascal) Durability Against Extreme Environmental Conditions: High salt mist and ammonia resistance.   12 Year Product Warranty 30 Year Linear Power Warranty   Dimensions: 2278x1134x35mm Due to size of the panels and size of the gap between the slats of the pallets (both length and width entries) fork lift truck on site is required to offload these modules.  Supplier Part No:JKM475N-60HL4-V-BF-JK03 Weight:24.2 kg Rated Power:475 W MCS Reference:BABT8801-106-475W Length:1,903 mm Width:1,134 mm Depth:30 mm VMPP:35.21 V IMPP:13.49 A Isc:14.07 A Voc:42.22 V Temp. Coefficient (Mpp):-0.3 % Clamp position on panel:Long and short side Connector Type:JK03M Efficiency:22.0 % Pallet Size:Oversized

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: JKM475N-60HL4-V-BF Panels - Monocrystallines Rating: 475W Efficiency: 22% Width: 1,134mm Height: 1,903mm Tiger Neo N-Type 60HL4 475 Watt Jinko reaches 23.53% module efficiency with TOPCon, high-efficiency N-Type TOPCon technology have three main highlights: * Higher bifacial factor will enable a “true” bifacial module * Combination of lower degradation and zero LID and LeTID will significantly reduce generation performance decline over time and exposure to the environment. * Lower temperature coefficient will maximize irradiation meanwhile overcome power loss due to raised heat SMBB Technology: Better light trapping and current collection to improve module power output and reliability. PID Resistance: Excellent Anti-PID performance guarantee via optimized mass-production process and materials control. Enhanced Mechanical Load: Certified to withstand: wind load (2400 Pascal) and snow load (5400 Pascal) Durability Against Extreme Environmental Conditions: High salt mist and ammonia resistance.   12 Year Product Warranty 30 Year Linear Power Warranty   Dimensions: 2278x1134x35mm Due to size of the panels and size of the gap between the slats of the pallets (both length and width entries) fork lift truck on site is required to offload these modules.    Supplier Part No:JKM475N-60HL4-V-BF Weight:22 kg Rated Power:475 W MCS Reference:BABT8801-102-475W Length:1,903 mm Width:1,134 mm Depth:30 mm VMPP:35.21 V IMPP:13.49 A Isc:14.23 A Voc:42.21 V Temp. Coefficient (Mpp):-0.3 % Clamp position on panel:Long and short side Connector Type:MC4 Efficiency:22.0 % Pallet Size:Oversized

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: JAM54D-40-420-GB-MC4 Panels - Bifacial Rating: 420W Efficiency: 21.5% Width: 1,134mm Height: 1,722mm JAM54D-40-420-GB-MC4 JA Solar 420W N-Tye Bifacial Double Glass High Efficiency Mono Module - 1500V Powered by the latest MBB n-type solar cell and half-cell configuration, these modules have higher output power, lower LID, better weak illumination response, and better temperature coefficient. Features: Higher power generation, better LCOE n-type with lower LID Better weak illumination response Better temperature coefficiant Product Warranty: 25 year Linear Power Output Warranty: 30 year   Supplier Part No:JAM54D40-420/GB Weight:21.5 kg Rated Power:420 W MCS Reference:BABT 8515-264 Length:1,722 mm Width:1,134 mm Depth:30 mm VMPP:31.8 V IMPP:13.21 A Isc:14.09 A Voc:38.05 V Temp. Coefficient (Mpp):-0.3 % Clamp position on panel:Long and short side Connector Type:EVO2 Efficiency:21.5 % Pallet Size:Oversized  

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: CS6R-415MS-EVO2-BF Panels - Monocrystallines Rating: 415W Efficiency: 21.3% Width: 1,134mm Height: 1,722mm HiKu6 Mono PERC High Efficiency Module CS6R-415MS MORE POWER: Module efficiency up to 21.5 % Lower LCOE & system cost Comprehensive LID / LeTID mitigation technology, up to 50% lower degradation Better shading tolerance MORE RELIABLE: Cell crack risk limited to smaller area of the cell Heavy snow load up to 5400Pa and increased wind load up to 2400Pa Weight: 21.3 Kg Comes with Staubli MC4-Evo2 Connectors.   Supplier Part No:CS6R-415MS Weight:21.3 kg Rated Power:415 W MCS Reference:BABT8767-59-410W Length:1,722 mm Width:1,134 mm Depth:30 mm VMPP:31.4 V IMPP:13.23 A Isc:14.09 A Voc:37.4 V Temp. Coefficient (Mpp):-0.34 % Clamp position on panel:Long side only Connector Type:EVO2 Efficiency:21.3 % Pallet Size:Oversized

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: Q.PEAK-G11-M-BLK-PLUS-DUO-400 Panels - Monocrystallines Rating: 400W Efficiency: 20.8% Width: 1,134mm Height: 1,692mm Breaking the 20% efficiency barrier Q.ANTUM DUO Z Technology with zero gap cell layout boosts module efficiency up to 20.8 %. A reliable investment Inclusive 25-year product warranty and 25-year linear performance warranty Enduring high performance Long-term yield security with Anti LeTID Technology, Anti PID Technology2 , Hot-Spot Protect Extreme weather rating High-tech aluminium alloy frame, certified for high snow (5400 Pa) and wind loads (3600 Pa) Innovative all-weather technology Optimal yields, whatever the weather with excellent low-light and temperature behaviour The most thorough testing programme in the industry Qcells is the first solar module manufacturer to pass the most comprehensive quality programme in the industry: The new “Quality Controlled PV” of the independent certification institute TÜV Rheinland.   Supplier Part No:Q.PEAK-G11-M-BLK-PLUS-DUO-400 Weight:21.2 kg Rated Power:400 W MCS Reference:MCS PV0062/655 Length:1,692 mm Width:1,134 mm Depth:30 mm VMPP:31.21 V IMPP:12.82 A Isc:13.41 A Voc:37.18 V Temp. Coefficient (Mpp):-0.34 % Clamp position on panel:Long and short side Connector Type:HQC4 Efficiency:20.8 % Pallet Size:Oversized

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: JAM72S-30-555-GR-F30-EVO2 Panels - Monocrystallines Rating: 555W Efficiency: 21.5% Width: 1,134mm Height: 2,278mm JAM72S30550/GR JAM72S30 is the latest in JA Solar's 72-cell range. This module with its 11-bus-bar half-cell configuration can reach a peak power output of 550W. This module offers better temperature-dependent performance and enhanced tolerance for mechanical loading. More benefits of this module range include: Higher power output Less shading Lower resistive losses Lower LCOE (Levelized Cost of Energy)   The frame thickness for this module has been improved from 35mm to 30mm. This module is equipped with Staubli MC4-EVO2A connectors. The panel has a design life of 25 years and a 12-year warranty period. Due to size of the panels and size of the gap between the slats of the pallets (both length and width entries). A forklift is required to offload these modules.  This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a result of incorrectly installed systems.   Supplier Part No:JAM72S-30-555-GR-F30-EVO2 Weight:27.3 kg Rated Power:555 W MCS Reference:BABT 8515-218-555W Length:2,278 mm Width:1,134 mm Depth:30 mm VMPP:42.11 V IMPP:13.18 A Isc:14.07 A Voc:50.02 V Temp. Coefficient (Mpp):-0.35 % Clamp position on panel:Long side only Connector Type:EVO2 Efficiency:21.5 % Pallet Size:Oversized

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: JAM54D-40-420-MB-MC4 Panels - Bifacial Rating: 420W Efficiency: 21.5% Width: 1,134mm Height: 1,722mm JAM54D-40-420-MB-MC4 JA Solar 420W N-Tye Bifacial Double Glass High Efficiency Mono Module - 1500V Powered by the latest MBB n-type solar cell and half-cell configuration, these modules have higher output power, lower LID, better weak illumination response, and better temperature coefficient. Features: Higher power generation, better LCOE n-type with lower LID Better weak illumination response Better temperature coefficiant Product Warranty: 25 year Linear Power Output Warranty: 30 year   Supplier Part No:JAM54D40-420/MB Weight:21.5 kg Rated Power:420 W MCS Reference:BABT 8515-265 Length:1,722 mm Width:1,134 mm Depth:30 mm VMPP:31.8 V IMPP:13.21 A Isc:14.09 A Voc:38.05 V Temp. Coefficient (Mpp):-0.3 % Clamp position on panel:Long and short side Connector Type:EVO2 Efficiency:21.5 % Pallet Size:Oversized

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: JKM445N-54HL4R-V-BF Panels - Monocrystallines Rating: 445W Efficiency: 22.1% Width: 1,134mm Height: 1,772mm Tiger Neo N-type 54HL4-(V) 445 Watt Better light trapping and current collection to improve module power output and reliability. The N-type module with Hot 2.0 technology has better reliability and lower LID/LETID. Excellent Anti-PID performance guarantee via optimized mass-production process and materials control. Certified to withstand: wind load (2400 Pascal) and snow load (5400 Pascal). Durability Against Extreme Environmental Conditions, High salt mist and ammonia resistance. 15 Year Product Warranty 30 Year Linear Power Warranty   Supplier Part No:JKM445N-54HL4R-V-BF Weight:22 kg Rated Power:445 W MCS Reference:BABT8801-114-445W Length:1,772 mm Width:1,134 mm Depth:30 mm VMPP:33.02 V IMPP:13.48 A Isc:13.93 A Voc:39.59 V Temp. Coefficient (Mpp):-0.4 % Clamp position on panel:Long and short side Connector Type:JK03M Efficiency:22.1 % Pallet Size:Oversized

Read more less

Part No: EN-IQ7A-72-M-INT-3PH Inverters - Micro Inverter Units Rating: 500W Phases: 3 This part is made up of the following items: 1 x EN-IQ7A-72-M-INT Enphase IQ7a 60/72 cell MC4 inegrated Microinverter 230VAC   PRODUCT FEATURES High performance version of the seventh-generation IQ platform Smart-Grid ready Easily integrated with the Gateway-S™ and Enphase™ monitoring and analysis software Easy to install thanks to lightweight design and improved two-wire cabling Double insulated housing, protection class II Modular design allows simple expansion of system as required Ultra reliable – system keeps working even if a single panel/microinverter fails or panel slips into shade Mobile app allows enhanced control and monitoring possibilities PRODUCT SPECIFICATION Commonly used module pairings: 295W - 460W + Module compatibility: 60-cell/120 half-cell and 72-cell/144 half-cell PV modules Peak output power: 366 VA Operating range: 18V - 58V IP Rating: IP67 Weight: 1.08 kg Rated Power: 500 W Min PPT Voltage: 38 V Max PPT Voltage: 43 V DC Startup Voltage: 33 V DC Shutdown Voltage: 32 V Max Input Voltage: 58 V Max DC Power: 500 W Max AC Power (5 Minutes): 366 W Surge AC Power (1 Second): 349 W Max DC Current: 10.2 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.5 % Transformer: HF MPPT Quantity : 1 Has Integrated DC Switch: No Warranty: 25 years Enphase Energy, founded in 2006 in California, is the world leader in micro inverter technology with more than 13 million units sold worldwide and over 500,000 installed systems representing over 3GW of clean energy.

Read more less

Part No: EN-IQ7A-72-M-INT Inverters - Micro Inverter Units Rating: 349W Phases: 1 This new IQ7A micro inverter can work with 60 and 72 cell solar panels up to peak power of 366VA   Product Features: Most Powerful Enphase Microinverter on the market with high power output of 366VA The IQ7+ has a power rating of 295VA making the IQ7A the better choice Lower clipping losses resulting in higher net energy availability The higher the PV module rate, the wider the difference between IQ7+ and IQ7A making the IQ7A the ultimate microinverter It is noteworthy that clipping losses with IQ7A is almost zero until 500Wp Easy to install and light weight Built-in rapid shutdown Optimized for high powered 60 and 72 cell modules Class 11 double insulated IP67 enclosure Smart Grid ready Supplier Part No: IQ7A-72-M-INT Weight: 1.08 kg Rated Power: 349 W Min PPT Voltage: 18 V Max PPT Voltage: 58 V DC Startup Voltage: 33 V DC Shutdown Voltage: 18 V Max Input Voltage: 58 V Max DC Power: 460 W Max AC Power (5 Minutes): 366 W Surge AC Power (1 Second): 366 W Max DC Current: 15 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.5 % Transformer: HF MPPT Quantity : 1 Has Integrated DC Switch: No Warranty: 25 years Enphase Energy, founded in 2006 in California, is the world leader in micro inverter technology with more than 13 million units sold worldwide and over 500,000 installed systems representing over 3GW of clean energy.

Read more less

Part No: EN-IQ7PLUS-72-M-INT-3PH Inverters - Micro Inverter Units Rating: 440W Phases: 3 This part is made up of the following items: 1 x  Enphase IQ7+ 60 and 72 cell MC4 integrated Microinverter 230 & 400VAC   PRODUCT FEATURES High performance version of the seventh-generation IQ platform Smart-Grid ready Easily integrated with the Gateway-S™ and Enphase™ monitoring and analysis software Easy to install thanks to lightweight design and improved two-wire cabling Double insulated housing, protection class II Modular design allows simple expansion of system as required Ultra reliable – system keeps working even if a single panel/microinverter fails or panel slips into shade Mobile app allows enhanced control and monitoring possibilities   PRODUCT SPECIFICATION Commonly used module pairings: 295W - 460W + Module compatibility: 60-cell/120 half-cell and 72-cell/144 half-cell PV modules Peak output power: 366 VA Operating range: 18V - 58V IP Rating: IP67 Weight: 1.05 kg Rated Power: 440 W Min PPT Voltage: 27 V Max PPT Voltage: 45 V DC Startup Voltage: 16 V DC Shutdown Voltage: 0 V Max Input Voltage: 60 V Max DC Power: 400 W Max AC Power (5 Minutes): 295 W Surge AC Power (1 Second): 290 W Max DC Current: 12 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.5 % Transformer: HF MPPT Quantity : 1 Has Integrated DC Switch: No Warranty: 25 years Enphase Energy, founded in 2006 in California, is the world leader in micro inverter technology with more than 13 million units sold worldwide and over 500,000 installed systems representing over 3GW of clean energy.

Read more less

Part No: EN-IQ7PLUS-72-M-INT Inverters - Micro Inverter Units Rating: 290W Phases: 1 Enphase IQ 7+  Microinverter The high-powered smart grid-ready Enphase IQ 7+ Micro™  achieve the highest system efficiency.  Part of the Enphase IQ System, the IQ 7+ integrate seamlessly with the Enphase Envoy-S™, and the Enphase Enlighten™ monitoring and analysis software.  The IQ 7+ Micro extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty.   Easy to Install Lightweight and simple Faster installation with improved, lighter two-wire cabling The IQ7 inverters each come with a DC module connector included. We also stock of spares if required: partno EN-Q-DCC-2-INT. Productive and Reliable Optimized for high powered 60-cell and 72-cell modules More than a million hours of testing Class II double-insulated enclosure Smart Grid Ready Complies with advanced grid support, voltage and frequency ride-through requirements Remotely updates to respond to changing grid requirements Configurable for varying grid profiles   Please note, in order to comply with G98/G99 regulations, from 27th of April 2019 EVERY Enphase microinverter system requires Envoy device to commission the system AND it needs to be left on site permanently.   Please note you may receive a mix of INT and FR versions, functionality will not be affected as the Envoy will push the appropriate grid profile out to the microinverters regardless. Supplier Part No: IQ7PLUS-72-M-INT Weight: 1.05 kg Rated Power: 290 W Min PPT Voltage: 16 V Max PPT Voltage: 60 V DC Startup Voltage: 22 V DC Shutdown Voltage: 16 V Max Input Voltage: 60 V Max DC Power: 440 W Max AC Power (5 Minutes): 290 W Surge AC Power (1 Second): 290 W Max DC Current: 14 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4   Included Connectors: 1 Euro Efficiency: 96.5 % Transformer: HF MPPT Quantity : 1 Has Integrated DC Switch: No Warranty: 25 years Enphase Energy, founded in 2006 in California, is the world leader in micro inverter technology with more than 13 million units sold worldwide and over 500,000 installed systems representing over 3GW of clean energy.

Read more less

This is included in Telfords range of indirect heat pump cylinders, designed specifically to operate with a range of air source heat pumps. These are available in a range sizes between 150-500L capacity. They do not include a 3-port valve and this must be purchased separately.  Featuring a purpose-designed coil with a 2m² surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide back-up heat. Duplex stainless steel provides superior corrosion resistance 316L grade stainless-steel 22mm compression fittings and coils Supplies mains pressure hot water and high flow rates Remote expansion vessel with factory-fitted wall mounting bracket Full unvented kit supplied (details below) Fully insulated to minimise any heat loss Twin coil option available for use with a traditional boiler and solar thermal Lifetime manufacturing warranty on inner container (2 years on components)* Renewable and bespoke options available   Cylinder Specifications Capacity: 250L Weight (empty): 40kg Weight (full): 288kg Height: 1800mm Diameter: 554mm Coil size: 3m² Product Details Product code TSMI250/HP Standing heat loss 2.00 kWh/24h Max supply pressure 12bar Max primary pressure 3bar T&P valve setting 7bar / 90 Deg. C Included Components 3kW immersion heater T&P relief valve Acetal Tundish Inlet group control 2-port valve External expansion vessel Dual probe thermostat

Read more less

This is included in Telfords range of indirect heat pump cylinders, designed specifically to operate with a range of air source heat pumps. These are available in a range sizes between 150-500L capacity. They do not include a 3-port valve and this must be purchased separately.  Featuring a purpose-designed coil with a 2m² surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide back-up heat. Duplex stainless steel provides superior corrosion resistance 316L grade stainless-steel 22mm compression fittings and coils Supplies mains pressure hot water and high flow rates Remote expansion vessel with factory-fitted wall mounting bracket Full unvented kit supplied (details below) Fully insulated to minimise any heat loss Twin coil option available for use with a traditional boiler and solar thermal Lifetime manufacturing warranty on inner container (2 years on components)* Renewable and bespoke options available Cylinder Specifications Capacity: 200L Weight (empty): 36kg Weight (full): 230kg Height: 1500mm Diameter: 554mm Coil size: 3m² Product Details Product code TSMI200/HP Standing heat loss 1.85 kWh/24h Max supply pressure 12bar Max primary pressure 3bar T&P valve setting 7bar / 90 Deg. C Included Components 3kW immersion heater T&P relief valve Acetal Tundish Inlet group control 2-port valve External expansion vessel Dual probe thermostat

Read more less

This is included in Telfords range of indirect heat pump cylinders, designed specifically to operate with a range of air source heat pumps. These are available in a range sizes between 150-500L capacity. They do not include a 3-port valve and this must be purchased separately.  Featuring a purpose-designed coil with a 2m² surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide back-up heat. Duplex stainless steel provides superior corrosion resistance 316L grade stainless-steel 22mm compression fittings and coils Supplies mains pressure hot water and high flow rates Remote expansion vessel with factory-fitted wall mounting bracket Full unvented kit supplied (details below) Fully insulated to minimise any heat loss Twin coil option available for use with a traditional boiler and solar thermal Lifetime manufacturing warranty on inner container (2 years on components)* Renewable and bespoke options available Cylinder Specifications Capacity: 170L Weight (empty): 34kg Weight (full): 202kg Height: 1200mm Diameter: 510mm Coil size: 2m² Product Details Product code TSMI170/HP Standing heat loss 1.94 kWh/24h Max supply pressure 12bar Max primary pressure 3bar T&P valve setting 7bar / 90 Deg. C Included Components 3kW immersion heater T&P relief valve Acetal Tundish Inlet group control 2-port valve External expansion vessel Dual probe thermostat

Read more less

This is included in Telfords range of indirect heat pump cylinders, designed specifically to operate with a range of air source heat pumps. These are available in a range sizes between 150-500L capacity. They do not include a 3-port valve and this must be purchased separately.  Featuring a purpose-designed coil with a 2m² surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide back-up heat. Duplex stainless steel provides superior corrosion resistance 316L grade stainless-steel 22mm compression fittings and coils Supplies mains pressure hot water and high flow rates Remote expansion vessel with factory-fitted wall mounting bracket Full unvented kit supplied (details below) Fully insulated to minimise any heat loss Twin coil option available for use with a traditional boiler and solar thermal Lifetime manufacturing warranty on inner container (2 years on components)* Renewable and bespoke options available Cylinder Specifications Capacity: 150L Weight (empty): 30kg Weight (full): 179kg Height: 1060mm Diameter: 510mm Coil size: 2m² Product Details Product code TSMI150/HP Standing heat loss 1.85 kWh/24h Max supply pressure 12bar Max primary pressure 3bar T&P valve setting 7bar / 90 Deg. C Included Components 3kW immersion heater T&P relief valve Acetal Tundish Inlet group control 2-port valve External expansion vessel Dual probe thermostat

Read more less

This is a pre-plumbed Tempest cylinder built for use with a Samsung ASHP with an inbuilt 50 litre buffer. Featuring a purpose-designed coil with a large surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders have push-fit pre-fabricated pipework and wiring to assist with a fast and easy installation.  Remote expansion vessel with factory-fitted wall mounting bracket Full unvented kit supplied Duplex stainless steel provides superior corrosion resistance White steel cased finish 316L grade stainless-steel 22mm compression fittings and coils Supplies mains pressure hot water and high flow rates Fast reheat Factory-fitted temperature and pressure (T&P) relief value set Highly efficient Fully insulated to minimise any heat loss Lifetime manufacturing warranty on inner container (2 years on components)*   Cylinder Specifications Capacity: 300L Weight (empty): TDB Weight (full): TDB Height: 2115mm Diameter: 580mm Coil size: 3.3m² Product Details Product code TSMI300/50/HP/PREP/SAM Standing heat loss 1.82 kWh/24h Max primary pressure 3bar T&P valve setting 7bar / 90 Deg. C Immersion heater 3kW Buffer Vessel 50L (integrated) Included Components Samsung control board (MIM-E03EN) 3-port valve Secondary circulation pump Filling loop Pressure gauge 15-22mm tundish 22mm inlet group valve Auto air vent

Read more less

This is a pre-plumbed Tempest cylinder built for use with a Samsung ASHP with an inbuilt 50 litre buffer. Featuring a purpose-designed coil with a large surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders have push-fit pre-fabricated pipework and wiring to assist with a fast and easy installation.  Remote expansion vessel with factory-fitted wall mounting bracket Full unvented kit supplied Duplex stainless steel provides superior corrosion resistance White steel cased finish 316L grade stainless-steel 22mm compression fittings and coils Supplies mains pressure hot water and high flow rates Fast reheat Factory-fitted temperature and pressure (T&P) relief value set Highly efficient Fully insulated to minimise any heat loss Lifetime manufacturing warranty on inner container (2 years on components)*   Cylinder Specifications Capacity: 250L Weight (empty): TDB Weight (full): TDB Height: 1921mm Diameter: 580mm Coil size: 3.3m² Product Details Product code TSMI250/50/HP/PREP/SAM Standing heat loss 1.71 kWh/24h Max primary pressure 3bar T&P valve setting 7bar / 90 Deg. C Immersion heater 3kW Buffer Vessel 50L (integrated) Included Components Samsung control board (MIM-E03EN) 3-port valve Secondary circulation pump Filling loop Pressure gauge 15-22mm tundish 22mm inlet group valve Auto air vent

Read more less