Smart Products Filter Index - Do not delete

Part No: HV-T-BAT-H-58-MASTER-V2 Storage Systems - Li-ion Battery Pack Solax Triple Power LFP Main Battery (Master)  T-BAT-H-58   The perfect match to X1-Hybrid, X3-Hybrid, and X1-AC, the SolaX Triple Power LFP battery is available as a Master Battery 5.8kWh and a Slave Battery 5.8kWh. Each Master can be installed with up 3 Slave batteries in series (charger dependent) for up to 23.2kWh storage capacity.  Please note: Only 1 or 2 Slave batteries can be used with 1x Master in a single-phase system (Maximum 3 batteries in total) and 2 or 3 Slave batteries can be used with 1x Master in a three-phase system (Maximum 4 batteries in total).   Additional features: Scalable to 23.2kWh Up to 4kW charge/discharge High Voltage means thinner cables are required. Compact Design 90% Depth of discharge 6000 life cycles Easy installation – plug and play with all cables supplied Triple Power LFP 5.8kWh Slave batteries can only be matched with LFP 5.8kWh Master batteries.  They are NOT compatible with Generation 1 or 2 BMS or Batteries! Additionally; T58 Master V2 + T58 Slave V1 / T58 Slave V2 ==> works normal T58 Master V1 + T58 Slave V2 ==> works but considering the better performance and compatibility, suggest to use slave V1 if there is existing V1 Master installed. Supplier Part No: Triple Power 5.8kWh Master V2 Weight: 72.2 kg Battery Type: Lithium Ion Nominal Energy: 5800 Wh Depth of discharge: 100.00 % Voltage: 115 V Continuous Discharge Rate (Normal Use): 2875 W Maximum Discharge Rate (5 Minutes): 4000 W Surge Discharge Rate (15 Seconds): 4000 W Maximum Charge Rate (5 Minutes): 4000 W Data Sheet Solax Battery Blue 5.8kWh EN

Read more less

Part No: GIV-HY3.6 Storage Systems - Hybrid Inverter  GivEnergy hybrid inverters is a must for every house hold where you have backup power during power outages as well as saving on your utility bill. This unique hybrid utilizes the free giving sunlight and makes it an flexible power source that is available when you need it as well as direct battery charge from your PV array. System needs to be connected to the internet to comply with warranty requirements. Product Features Uses GivEnergy Lithium batteries that can be added to extend KWh of battery bank Batteries can be charged from Solar PV as well as your current utility supply Cloud based monitoring and control through WEB APP interface Inverter can be remotely updated Via Wi-Fi /4G dongle Inverter do have 2500W backup power capability Available in 3.6KW and 5KW Inverter has 2 MPPT PV inputs that allow you to have solar panels in 2 different orientations Installations can be for new installs or retrofit to an existing system Backup function supported Please Note: Givenergy online portal login is required to fully commission this system. If You do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID!  Givenergy system must be connected to the internet to benefit from full warranty services, please refer to GIV-WIFI-DONGLE or GIV-3G-DONGLE   Supplier Part No: 3.6kW Hybrid inverter Weight: 33 kg Rated Power: 3,600 W Min PPT Voltage: 120 V Max PPT Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 100 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 Minutes): 3,679 W Surge AC Power (1 Second): 3,680 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 99.5 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Data Sheet Hybrid 3.6 -5

Read more less

Part No: FE-HV-ECS-4100 Storage Systems - Li-ion Battery Pack Fox Energy Cube - High Voltage Battery (Slave) CLICK HERE FOR DATA SHEET ECS4100  Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 28.21 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  4.03kWh Capacity Scalable to 28.21kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage Supplier Part No: Energy Cube CS4100 Weight: 38.3 kg  

Read more less

Part No: GIV-EM115CT Display - Energy Meter   GivEnergy EM115 Single Phase Modbus Energy Meter for direct metering up to 100A Product Features With bi-directional energy measurement This meter is ideal for Solar PV energy metering Direct/CT connection and solid or split CT options LCD display with clear green backlight 50 Pulse output 1,2,3 and 4 tariff meter option Accuracy class B according to EN50470-3 Accuracy class 1 according to IEC62053-21 EEprom memory backup Import / Export / Generation and Consumption NET Metering to comply with OFGEM regulations on Co-located Storage   Supplier Part No: GIV-EM115CT Weight: 0.25 kg

Read more less

Part No: SUN-8.0-ECCO Storage Systems - Hybrid Inverter The Sunsynk 5kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator.  Product Features Dual MPPT design  Compatible with most Lithium-ion batteries and Lead Acid batteries Mobile App for monitoring IP65 rated Automatic switching from Grid-Tied to Off-Grid mode Zero export function Up to 16 units with the same firmware can be paralleled Essential and Non-Essential Loads outputs Comes with the Wi-Fi logger and CT Compatible with SolarMan App for Monitoring Pylontech Compatibility Tested: US 3000C  US 2000B-Plus US 3000B Not currently tested with Pylon – LV Hub please consult with us before proceeding   For installations with the US3000C and UP5000 please use the following BMS cable SUN-CAN-3M   INSTALLER NOTICE: Installations with Sunsynk products now need to be registered here to gain full activation of the warranty. BEFORE INSTALLATION, please ensure that you check that the Inverter is updated to the latest firmware version.  Latest Version 3367 E41C Supplier Part No: Sunsynk-8.8-K-SG01LP1 ECCO Weight: 25 kg Rated Power: 8,000 W Min PPT Voltage: 125 V Max PPT Voltage: 425 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 500 V Max DC Power: 6,500 W Max AC Power (5 Minutes): 8,001 W Surge AC Power (1 Second): 8,002 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.5 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes   Data Sheet 8.0 ECCO (draft)

Read more less

Part No: SUN-3.6-ECCO Storage Systems - Hybrid Inverter The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68 resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as; Dual MPPT design  Compatible with Lithium-ion batteries and Lead Acid batteries Up to 50kWh battery pack 5yr warranty as standard IP65 rated Anti-islanding protection Fully programmable power export Automatic switching from Grid-Tied to Off-Grid mode Up to 16 units with the same firmware can be paralleled  Supplier Part No: SUNsynk-3.5K-SGO1LP1 ECCO Weight: 20.5 kg Rated Power: 3,600 W Min PPT Voltage: 125 V Max PPT Voltage: 500 V DC Startup Voltage: 150 V DC Shutdown Voltage: 125 V Max Input Voltage: 500 V Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W Surge AC Power (1 Second): 5,400 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 99.9 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Data Sheet 3.6 ECCO

Read more less

Part No: JKM435N-54HL4R-B Panels - Monocrystallines Rating: 435W Efficiency: 21.8% Width: 1,134mm Height: 1,762mm Price per Watt: (16.6p/Wp) SMBB Technology: Better light trapping and current collection to improve module power output and reliability Hot 2.0 Technology: The N-type module with Hot 2.0 technology has better reliability and lower LID/LETID PID Resistance: Excellent Anti-PID performance guarantee via optimized mass-production process and materials control. Enhanced Mechanical Load Certified to withstand: wind load (2400 Pascal) and snow load (5400 Pascal). Durability Against Extreme Environmental Conditions High salt mist and ammonia resistance. 25 Year Product Warranty 30 Year Linear Power Warranty   Supplier Part No: JKM435N-54HL4R-B Weight: 22 kg Rated Power: 435 W MCS Reference: BABT8801-117-435W Length: 1,762 mm Width: 1,134 mm Depth: 30 mm VMPP: 32.78 V IMPP: 13.27 A Isc: 13.72 A Voc: 39.36 V Temp. Coefficient (Mpp): -0.29 % Clamp position on panel: Long and short side Connector Type: MC4 Efficiency: 21.8 % Pallet Size: Oversized

Read more less

Sunsynk’s top-grade 5.32kWh Lithium-Ion Phosphate batteries have been engineered to the highest standard. They are capable of up to 80% depth of discharge and scalable up to 16 times, allowing for a maximum of 85.12kWh per inverter.  Our BMS (Battery Management System) also offers a quick paralleling function, so no dip switches are needed, making installation straightforward.    Our battery is 1C rated, meaning that it will be able to charge or discharge at the full 5.32kWh until it is depleted. This allows the end user to utilise the full potential of our inverter and battery systems.

Read more less

5 SYSTEMS IN STOCK Part No: FE-AIO-H1-5.0-10.4 Storage Systems - Self Consumption Packages This part is made up of the following items: 1 X  HV2600 2.6kWh HV Battery   1 X All In One Inverter 1PH, 5kW No Battery   The Fox All-in-one is a stylish single phase floor mounted unit. The Fox AIO uses high voltage batteries for maximum round-trip efficiency, ensuring you get the most our of your storage. The IP65 rated enclosure allows the unit to be installed outdoors for maxumum installation flexibility. The Fox AIO is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. Uses high voltage batteries HV2600 IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97%   Weight:217 kg Data Sheet AIO-H1- 3-6

Read more less

The Libbi battery top cover acts as a cosmetic piece when installing a 15/20kW system. With the batteries sitting in two banks of two, the set without the inverter on top would have handles visibly showing on the top. The top cover covers these handles.   Spec sheet

Read more less

The libbi is the new hybrid inverter and battery bundle produced by myenergi. This is the 5kW hybrid inverter and allows for seamless integration between all myenergi devices. Up to 4 batteries can be added to the libbi in parallel, meaning up to 20kWh of energy storage is available. Furthermore, this product has the added option of emergency power supply (EPS) backup in the event of a blackout.  Spec sheet This Kit Includes: 1 x 5kW Libbi Inverter 4 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 20kWh Battery Kit 

Read more less

The libbi is the new hybrid inverter and battery bundle produced by myenergi. This is the 5kW hybrid inverter and allows for seamless integration between all myenergi devices. Up to 4 batteries can be added to the libbi in parallel, meaning up to 20kWh of energy storage is available. Furthermore, this product has the added option of emergency power supply (EPS) backup in the event of a blackout.  This Kit Includes: 1 x 5kW Libbi Inverter 1 x 5kWh Libbi Home Battery 1 x Libbi Cable Expansion Kit for 5kWh 1 x Myenergi Controller   Spec sheet

Read more less

The libbi is the new hybrid inverter and battery bundle produced by myenergi. This is the 3.68kW hybrid inverter and allows for seamless integration between all myenergi devices. Up to 4 batteries can be added to the libbi in parallel, meaning up to 20kWh of energy storage is available. Furthermore, this product has the added option of emergency power supply (EPS) backup in the event of a blackout.  This Kit Includes: 1 x 3.68kW Libbi Inverter 1 x 5kWh Libbi Home Battery 1 x Libbi Cable Expansion Kit for 5kWh 1 x Myenergi Controller   Spec sheet

Read more less

GivEnergy design and manufacture their own inverters, batteries and state-of-the-art management system and monitoring platform which combine to offer an exceptional storage package. The third generation of the GivEnergy Hybrid inverter is a DC-coupled storage solution which allows you to seamlessly integrate battery storage into PV systems.This Bundle Includes: 1 x GivEnergy Gen 3 3.6kW Hybrid Inverter 1 x GivEnergy 5.2kWh Battery 1 x GivEnergy 100A DC Breaker 1 x GivEnergy Gem120CT Meter 1 x GivEnergy All-in-One to Ring Terminal Cable

Read more less

Part No: GIV-GM120CT Display - Energy Meter GivEnergy Single Phase Energy Meter With CT The Modbus I.D of the meter comes preset as ID1 but provides functionality to be addressed under 3 different Modbus IDs ID1 - Import and Export meter ID2/3 - PV Monitoring meters PLEASE NOTE: Currently this meter is not programmable we are awaiting an update from GivEnergy 45/100 = 45A In-Line connected meter with a 100A CT Protection Class IP51 Dimensions (HxWxD) 119 x 17.5 x 62mm For any additional information on the new metering solution or if you need to reprogram the address of the meter on site, then please contact - support@givenergy.co.uk   Supplier Part No: GEM120CT Weight: 0.2 kg

Read more less

Part No: GIV-HY-3.6-G3 Storage Systems - Hybrid Inverter GivEnergy Hybrid Inverter 3.6kW Gen 3  The third generation of the GivEnergy Hybrid Inverter is a battery and solar inverter in one unit PLEASE NOTE: AN EARTH BONDING KIT IS REQUIRED WITH EVERY GEN 3 INVERTER. THIS IS NOT INCLUDED AND MUST BE ADDED SEPARATELY. It can be coupled directly with solar panels to generate usable electricity in the property as well as store any excess energy for later use in a battery. The Hybrid Inverter aims to minimise export by storing excess energy in the battery during generation hours. Additionally, it will minimise import by discharging to meet demand in the property Spec MPPT Range 120V - 550V Max. Short Circuit Current (per string) 20A Max. Input Current (per string) 15A MPPT Tracker / No. of Strings per MPPT Tracker 2/1 Features  In-built WiFi and LAN Higher Charge/Discharge Rate Flexible Rate Tarif 5 Year Warranty Supplier Part No: GIV-HY3.6 G3 Weight: 32 kg Rated Power: 3,600 W Min PPT Voltage: 120 V Max PPT Voltage: 580 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 550 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 3,600 W Surge AC Power (1 Second): 3,600 W Max DC Current: 30 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No

Read more less

Part No: GIV-HY-5.0-G3 Storage Systems - Hybrid Inverter GivEnergy Hybrid Inverter 5.0kW Gen 3  The third generation of the GivEnergy Hybrid Inverter is a battery and solar inverter in one unit PLEASE NOTE: AN EARTH BONDING KIT IS REQUIRED WITH EVERY GEN 3 INVERTER. THIS IS NOT INCLUDED AND MUST BE ADDED SEPARATELY It can be coupled directly with solar panels to generate usable electricity in the property as well as store any excess energy for later use in a battery. The Hybrid Inverter aims to minimise export by storing excess energy in the battery during generation hours. Additionally, it will minimise import by discharging to meet demand in the property Spec MPPT Range 120V - 550V Max. Short Circuit Current (per string) 20A Max. Input Current (per string) 15A MPPT Tracker / No. of Strings per MPPT Tracker 2/1 Features  In-built WiFi and LAN Higher Charge/Discharge Rate Flexible Rate Tarif 5 Year Warranty Please note:

Read more less

This part is a special offer made up of the following items: Part   1 x  GivEnergy All In One - 13.5 kW - NO GATEWAY   1 x  GivEnergy - All In One - Gateway ONLY The GivEnergy All In One AC coupled system has many advantages. With 7.2kW peak power, the charge and discharge rate of these batteries helps better take advantage of agile tariffs.  Alongside this, the system is complete with a substantial 13.5kWh useable battery pack and allows for 100% Depth of Discharge. Beyond the advantage of working with flexible rate tariffs, the All In One has an integrated LoRa to remove the need for long cable runs between the CT and the inverter by making this wireless and can provide whole house backup when paired with a GivEnergy Gateway. Furthermore, the All In One inverter is grid service ready meaning  that end users can take advantage when energy suppliers offer payments to reduce their electrical consumption at certain times.  Up to 6 systems can be connected in parallel, giving 80kWh of useable storage and the ability to deliver an enormous 30kW of power into the home. This features a modular design for ease of handling and installation by splitting into 5 x 30kg parts. AC attributes Max power: 7200W Max current: 32A Number of phases: 1 Battery Information Battery Voltage 260-346V Max Charge Current 25A Max Discharge Current  25A Battery Capacity 13.5kWh Max DoD  100% Communication CAN System Max efficiency 97% IP rating IP65 Weight 150kg Dimensions mm Key features Grid Service Ready Whole House Backup Works with flexible rate tariffs Scalable with a modular design

Read more less

This package is made up of the following items: Part   1 x GIV-BAT9.5 GivEnergy Gen 2 9.5kWh Li-Ion Battery   1 x GIV-HY5.0 GivEnergy 5.0KW Hybrid inverter GEN 1   1 x GIV-EM115CT GivEnergy EM115 Single Phase Modbus Energy Meter with CT   1 x GIV-WIFI-DONGLE GivEnergy WiFi Dongle   1 x GIV-BAT-CAB-G1-G2 GivEnergy Battery cable for Gen 1 to Gen 2

Read more less

Part No: SUN-CABLE-SHORT Storage Systems - Accessory Battery to Battery short cable pack.  For Sunsynk CATL battery only.  Does not work with Sunsynk BYD battery.    Supplier Part No: Battery Cable Pack Short for Sunsynk Weight: 0.2 kg Length: 0.3 m

Read more less

Part No: SOL-S5-GC30K-DC Inverters - Main Units Rating: 30,000W Phases: 3 S5-GC30K - Series 5 Three Phase Grid-Tied Inverter Product Features: Max. efficiency of 98.5%  Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 180V and max PV input voltage of 1100V 32A input per MPPT, 16A input for each PV string Maximum AC output power of 33kW  3 MPPT design with precise MPPT algorithm, with 2 DC inputs per MPPT effectively reducing string mismatch Intelligent monitoring, Smart I-V Curve Diagnosis Integrated AFCI (DC arc-fault circuit protection) IP66 Rated  DC reverse-polarity protection 5-year standard warranty Register on SolisCloud, to support remote upgrade and control. SA: NRS-097-2-1 Certified EU: German installation manual stlll pending from manufacturer. UK: Please note that a slight adjustment was required on the G99 report which has resulted in S5-GC range temporarily losing their G99 approved status. The updated form has already been resubmitted to the ENA and is currently awaiting assessment.   This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a  result of incorrectly installed systems. Supplier Part No: SOL-S5-GC30K-DCWeight: 44 kgRated Power: 30,000 WMin PPT Voltage: 200 VMax PPT Voltage: 1,000 VDC Startup Voltage: 200 VDC Shutdown Voltage: 180 VMax Input Voltage: 1,100 VMax DC Power: 45,000 WMax AC Power (5 Minutes): 33,000 WSurge AC Power (1 Second): 33,000 WMax DC Current: 96 AMax DC Inputs: 6Has DC Fuses: 0Connector: MC4 Included Connectors: 12Euro Efficiency: 98.1 %Transformer: NoneMPPT Quantity : 3Has Integrated DC Switch: YesWarranty: 5 years Click Here For Specs 

Read more less

Part No: FE-HV-ECS-2900 Storage Systems - Li-ion Battery Pack Fox Energy Cube - High Voltage Battery (Slave) ECS2900  Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage   This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems. Supplier Part No: Energy Cube CS2900 Weight: 32.4 kg Battery Type: Lithium Ion Nominal Energy: 2880 Wh Depth of discharge: 90.00 % Voltage: 52 V Continuous Discharge Rate (Normal Use): 1440 W Maximum Discharge Rate (5 Minutes): 2880 W Surge Discharge Rate (15 Seconds): 3000 W Maximum Charge Rate (5 Minutes): 2880 W Data Sheet Energy Cube 2.9kWh  

Read more less

 Part No: X1-AC-3.6 Storage Systems - Charger-Inverter X1 AC Charger Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland. Supplier Part No: X1-AC-3.6 Charger Weight: 18 kg Rated Power: 3,680 W Data Sheet Solax X1 AC coupled

Read more less

Part No: SOLAX-WIFI Display - Web Interfaces Enhance your SolaX installation by connecting it to the SolaX Cloud. This WiFI dongle allows an wireless connection to be made to the Internet router. This is ideal when running a cable isn't possible. One dongle is needed per SolaX inverter. Supplier Part No: Wifi dongle For X1 inverters Weight: 0.105 kg

Read more less

Brand: myenergiItem Code: LIBBI-EK201 Spec sheet MyEnergi are a company determined to create a sustainable future by using eco-smart technology. MyEnergi have supplied tens of thousands of homes and businesses globally with smart devices like EV chargers, which are designed to transform living and working environments with green energy solutions. The MyEnergi LIBBI-EK201 is a cable pack for a 20kWh Libbi battery storage system. What’s included: Communication Cable - 300mm Communication Cable - 570mm (x2) Communication Cable - 1700mm Power Cable-Negative (Black) - 250mm Power Cable-Negative (Black) - 485mm (x2) Power Cable-Negative (Black) - 1800mm Power Cable-Positive (Red) – 485mm (x2) Power Cable-Positive (Red) – 1900mm Power Cable-Positive (Red) – 3300mm PE Cable – 520mm (x2) PE Cable – 700mm PE Cable – 1700mm

Read more less

Single phase ECA2 meter Z version without pulsed output (this is not the flashing LED but actually a physical connection with a transistor output. This is normally used with Data loggers but is rarely used in PV metering).

Read more less

Part No: REN-420271 Mounting - Fixings Attachement to fix optimiser/microinverter to Renusol Variosole + rail or Metasole plates.    Supplier Part No:420271 Weight:0.045 kg

Read more less

Part No: GIV-SP-16-2.4-TC-01 Accessories - Smart Plugs GivEnergy Smart Plug  16A Smart Plug with Energy Monitoring Power and Energy Breakdown WiFi Controlled Model Number: GIV-SP-16-2. 4-TC-01 Working Temp: -10 ~ 60°C WiFi Requirements: 2.4 GHz Only Input Voltage: 230V AC 50Hz - 60Hz Rated Current: 16A Max Max Power: 3680W     Supplier Part No:GIV-SP-16-2.4-TC-01 Weight:0.082 kg

Read more less

Part No: SOL-EPM1-5G Display - Power Management Solis EPM 5G The control centre for smart energy management The Solis Export Power Manager is the ideal solution for smart energy management for both residential and commercial systems. The unit allows you to adjust export values to satisfy local network regulatory requirements. Energy management with the Solis export power manager allows for higher self-consumption and efficient use of the locally generated PV power. Easy to Use Active power limitation and control at the grid-connection point Automatic, intelligent control of loads with up to 10x Solis inverters Easy commissioning with the PV System Setup Assistant SolisCloud monitoring platform Only suitable for Solis inverters made after November 2019 Solis do not provide CT clamps with these devices and they must be sourced separately - the secondary current for the CT should be 5A   Disclaimer: This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.   Please refer to the App note in Documents for setting up your EPM to your Wi-Fi network. Important This unit is for single phase inverters only Supplier Part No:SOL-EMP1-5G Weight:2.1 kg

Read more less

Part No: GIV-GM120CT Display - Energy Meter The Modbus I.D Of The Meter Comes Preset As ID1 But Provides Functionality To Be Addressed Under 3 Different Modbus IDs ID1 - Import and Export meter ID2/3 - PV Monitoring meters 45/100 = 45A In-Line connected meter with a 100A CT Protection Class IP51 Dimensions (HxWxD) 119 x 17.5 x 62mm CT cable length - 150cm For any additional information on the new metering solution or if you need to reprogram the address of the meter on site, then please contact - support@givenergy.co.uk Please note: Currently this meter is not programmable we are awaiting an update from GivEnergy We awaiting information and documentation for this product   Supplier Part No:GEM120CT Weight:0.2 kg

Read more less

Part No: SOL-CT-100A-10M Display - Current Sensor Clamps 100A Current Transformer for Solis single phase 4G, 5G and 6S range. This CT is required for export limitation feature of the  inverters to work. Please note: This CT is for limiting the export of single phase inverters only and is not intended for use with the range of Export Power Managers.   33.3mA secondary current Supplier Part No:SOLIS-4G-CT-10M Weight:0.32 kg

Read more less

Part No: SAN-DFS-14 Switches - Firefighter Safety The new, improved Firefighter's Safety Switch system from Santon is designed for automatic (remote/motorised) disconnection of the DC output from an installed array of PV modules. 16A 1000V 20A 850V 25A 800V 32A 650V The Firefighter Safety Switch system can operate/disconnect a PV installation quickly, completely and remotely with one simple action at the control-panel interface, or even by remote actuation using the mobile phone network. By shutting off the installation, no DC power is conducted from the array through the property which results in a safe situation for firefighters to fight the fire and enter the building. This unit is 16A 1000V / 32A 650V 4P and it has cable knock outs only.    Supplier Part No:DFS-14 Weight:1.39 kg Poles:0 Max Cable:0 mm2 Max Voltage:0 V

Read more less

The SolaX X1 Hybrid 7.5kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements. The Gen4 has been designed and developed using the very latest solar technology. SolaX  have pushed back the boundaries for what is possible when designing a storage inverter. The ground-breaking SolaX X1 Hybrid 7.5kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. In-built EPS changeover switch Supports up to 150% PV oversizing and 110% overload output Can work at full capacity down to -35C 97.0% Charge/discharge efficiency On-grid and off-grid use 5 work modes, 2 charging periods available IP65 protection level CT compatible, loads respond within 0.3s 30 Minute Total Installation Time Includes WiFi Dongle

Read more less

Part No: FE-HV-EC-4-4.1-16.4 Storage Systems - Li-ion Battery Pack This part is made up of the following items: 3 x FE-HV-ECS-4100 Fox ECS 4.03kWh HV Battery (Slave)   1 x FE-HV-ECM-4100 Fox ECS 4.03kWh HV Battery (Master)     Fox ECS 4.1kWh - Stack of 4 (16.12kWh Useable Storage) Incl. Master ECM4100  4.03kWh Capacity Scalable to 28.21kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM4100 battery modules to be added post installation. Weight: 146.3kg Dimensions (Width, Hight, Depth): 570mm x 590mm x 380mm Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves)   Included in Kit KIT-FOX-3.7-HV Fox 3.7 HV Hybrid Kit UK Weight: 153.2 kg Battery Type: Lithium Ion Nominal Energy: 16120 Wh Depth of discharge: 90.00 % Voltage: 230 V Continuous Discharge Rate (Normal Use): 11520 W Maximum Discharge Rate (5 Minutes): 11520 W Surge Discharge Rate (15 Seconds): 14976 W Maximum Charge Rate (5 Minutes): 11520 W

Read more less

Part No: SUN2000-LUNA-5KWh Storage Systems - Li-ion Battery Pack This part is made up of the following items: Huawei LUNA 5KWh battery module only Huawei LUNA Power Module BMS Smart String Energy. This is the complete 5KWh Luna Battery. Product Features Flexible due to 5KWh that can be easy scaled from 5KWh to 30KWh 100% DOD pack level energy optimization Easy to install due to 12Kg power module and 50Kg battery module Lithium Iron Phosphate cells resulting is safe and reliable battery Auto Detected by battery Compatible with single and 3 Phase inverters Battery fault on module auto isolates to keep system safe battery module is 5 KWh per module  this consists of 1 x battery module and 1 x power module Nominal voltage of battery is 600VDC max output per module is 2500W 10 year warranty max is 2 x systems in parallel RS485 BMS communication  IP66 Weight: 71 kg Battery Type: Lithium Ion Nominal Energy: 5000 Wh Depth of discharge: 100.00 % Voltage: 600 V Continuous Discharge Rate (Normal Use): 2500 W Maximum Discharge Rate (5 Minutes): 2500 W Surge Discharge Rate (15 Seconds): 2500 W Maximum Charge Rate (5 Minutes): 2500 W Data Sheet Huawei Luna

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: JAM54S-30-410-MR-BF Panels - Monocrystallines Rating: 410W Efficiency: 21% Width: 1,134mm Height: 1,722mm JAM54S-30-410-MR-BF Assembled with 11BB Perc cells, the half-cell configuration of the module offers the advantages of the higher power output, better temperature-dependent performance,  reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading. 12 Year Product Warranty. 25 Year Linear Output Warranty. Higher Output Power Lower LCOE Less shading and lower resistive loss Better mechanical loading tolerance   Supplier Part No: JAM54S30-410/MR Weight: 21.5 kg Rated Power: 410 W MCS Reference: BABT 8515-231 Length: 1,722 mm Width: 1,134 mm Depth: 30 mm VMPP: 31.45 V IMPP: 13.04 A Isc: 13.95 A Voc: 37.32 V Temp. Coefficient (Mpp): -0.35 % Clamp position on panel: Long and short side Connector Type: EVO2 Efficiency: 21.0 % Pallet Size: Oversized Data Sheet NL

Read more less

Part No: SUN3.68KTL-L1 Storage Systems - Hybrid Inverter Huawei Fusion Home SUN2000L1 - 3/ 3.68 / 5 / 6KTL The Smart Energy Controller (SUN2000- 3 / 3.68 / 5 / 6KTL-L1) is Huawei new single-Phase inverter and is direct compatible with their own Huawei Luna battery Product Features Direct compatible with Luna battery and is Plug and Play and no extra devices is needed AI Self leaning new arc detection Is compatible with the Sun2000-450W-P optimizer Simple commissioning by APP Auto-detection of system equipment Registering your plant by scanning any device Energy Flow illustration Real-time data at anytime and anywhere Performance data back-up Physical & logical module layout Module -level performance monitoring Smart I-V Diagnosis Smart dongle Plug and Play (LAN or 4G dongle available) Smart dongle support up to 10 inverters IP65 Can be installed without batteries as 'battery ready' Max 3 batteries per inverter Supplier Part No: 01075349 Weight: 12 kg Rated Power: 3,680 W Min PPT Voltage: 90 V Max PPT Voltage: 560 V DC Startup Voltage: 100 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 5,520 W Max AC Power (5 Minutes): 3,700 W Surge AC Power (1 Second): 3,701 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: Amphenol H4   Included Connectors: 2 Euro Efficiency: 97.3 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Data Sheet Huawei L1

Read more less

Part No: SUN-BAT-CATL-5.12 Storage Systems - Li-ion Battery Pack   Brackets not included; You can use either of the following: SUN-WALL-BR; Battery Wall mount bracket for 1 battery Introducing Sunsynk's energy storage module well designed for residential UPS and off-grid applications. Cells produced by CATL, a global leader in lithium-ion battery developement and manufacturing. Product Features Long life span with an expected life of 10-years 5-year product warranty(non extendable) 10-year performance warranty Parallel capability of 16 units 100% Depth of Discharge 5.12kW maximum discharge power (C0.5 rated)  Batteries provide excellent thermal stability and storage and also has a self-monitoring function to detect abnormalities.  IP rating 40   INSTALLER NOTICE: Installations with Sunsynk products now need to be registered here.  Supplier Part No: Sunsynk CATL Battery LFP 5.12kWh Weight: 47.5 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 9600 W Maximum Charge Rate (5 Minutes): 4800 W Data Sheet Sunsynk CATL Battery 5.12

Read more less

Part No: HV-58-3-17.6 Storage Systems - Li-ion Battery Pack  This part is made up of the following items: 2 x HV11550-58-SLAVE SolaX Triple Power HV 5.8kWh LFP Extension Battery SLAVE   1 x HV-T-BAT-H-58-MASTER SolaX Triple Power HV 5.8kWh LFP Main Battery MASTER   Weight: 218 kg Battery Type: Lithium Ion Nominal Energy: 17600 Wh Depth of discharge: 90.00 % Voltage: 345 V Continuous Discharge Rate (Normal Use): 8625 W Maximum Discharge Rate (5 Minutes): 3500 W Surge Discharge Rate (15 Seconds): 12000 W Maximum Charge Rate (5 Minutes): 3500 W Data Sheet

Read more less

Part No: FE-H1-3.7 Storage Systems - Hybrid Inverter The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. Uses high voltage batteries FE-HV2600 IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% CT Clamps, meter and WiFi stick are included in the box Please Note: When installing batteries side-by-side and not stacked one on top of the other, we recommend using FE-HV2600-EXT-1M   Supplier Part No: H1-3.7 (with EPS) Weight: 26 kg Rated Power: 3,680 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 75 V Max Input Voltage: 600 V Max DC Power: 4,680 W Max AC Power (5 Minutes): 5,000 W Surge AC Power (1 Second): 6,000 W Max DC Current: 27 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years Data Sheet H1AC1-3-6-EN

Read more less

 Part No: X1-HYBRID-G4-3.7 Storage Systems - Hybrid Inverter G4 HV Single Phase Hybrid Inverter and Charge controller range This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Supplier Part No: X1 G4- Hybrid 3.7 D Weight: 24 kg Rated Power: 3,700 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 5,500 W Max AC Power (5 Minutes): 3,680 W Surge AC Power (1 Second): 4,400 W Max DC Current: 28 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 10 years Data Sheet G4 Hybrid

Read more less

 Part No: X1-HYBRID-G4-5.0 Storage Systems - Hybrid Inverter G4 HV Single Phase Hybrid Inverter and Charge controller range This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Supplier Part No: X1 G4- Hybrid 5.0 D Weight: 28 kg Rated Power: 5,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 4,600 W Surge AC Power (1 Second): 5,500 W Max DC Current: 28 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 10 years Data Sheet G4 Hybrid

Read more less

Part No: SOL-3.6-MINI-S6-DC Inverters - Main Units Rating: 3,600W Phases: 1 The All New Solis Mini 6S Series Grid-tie Inverter. Compact and lightweight design, for easy installation. Fanless, minimal noise, producing less than 20 dBA. Compatible with high-efficiency modules and bi-facial modules. Product Features Super high frequency switching technology with maximum efficiency of 97.3% Max PV Power of 5.4kW DRM (Demand Response Mode) integrated and backflow power control function for smart grid requirements. Wide voltage range - Ultra low start-up voltage of 90V and max PV input voltage of 500V Intergrated Export Power Manager (EPM) Integrated AFCI (DC arc-fault circuit protection) Integrated DC switch for emergency shut-down of PV power or safe PV maintenance 5-year standard warranty Supplier Part No: S6-GR1P3.6K-M-DC Weight: 7.7 kg Rated Power: 3,600 W Min PPT Voltage: 90 V Max PPT Voltage: 500 V DC Startup Voltage: 90 V DC Shutdown Voltage: 80 V Max Input Voltage: 600 V Max DC Power: 5,400 W Max AC Power (5 Minutes): 3,600 W Surge AC Power (1 Second): 3,600 W Max DC Current: 19 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 1 Euro Efficiency: 96.8 % Transformer: None MPPT Quantity : 1 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Data Sheet S6-GR1P(0.7-3.6)K-M

Read more less

Part No: X3-HYBRID-G4-10.0-V2 Storage Systems - Hybrid Inverter High-efficient 150% PV oversized and 110% overload output Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking functio Economic Maximum 16A DC input current, support for high power solar panel Store the surplus energy from PV to battery Low start output voltage makes inverter longer working time Less energy loss on battery to inverter Intelligent Switchover time <10ms Quick configuration with U-disk Lithium & Lead-acid battery compatible CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW 5 work modes, 2 charging periods available VPP ready, ancillary service in power market Three-phase unbalanced output 50% nominal output power on single phase at most Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment Supplier Part No: X3-Hybrid G4 10.0 V2 with Wi-Fi & CT Weight: 34 kg Rated Power: 10,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 180 V DC Shutdown Voltage: 0 V Max Input Voltage: 950 V Max DC Power: 10,000 W Max AC Power (5 Minutes): 10,001 W Surge AC Power (1 Second): 10,002 W Max DC Current: 24 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 0 Euro Efficiency: 97 % Transformer: HF MPPT Quantity : 0 Has Integrated DC Switch: No Data Sheet X3 G4

Read more less

Part No: SOL-RHI-3P5K-HVES-5G-DC Storage Systems - Hybrid Inverter This is the perfect three phase hybrid solution for medium to large houses and business use as well.  Product features 2 x MPPT and 4 DC input at max of 26A 3 x operation modes Self-consumption; time of use; off-grid backup 4 models range from 5KW to 10 KW output as well as backup Supporting Li-ion high voltage batteries ranging from 160 to 600VDC Time of use shifting peak shaving capabilities to grid Intelligent EMS function Supporting three-phase imbalance 24-hour monitor and management system Remotely control and upgrade any selected inverter Supplier Part No: Solis-RHI-3P5K-HVES-5G-DC Weight: 25.1 kg Rated Power: 5,000 W Min PPT Voltage: 160 V Max PPT Voltage: 850 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 8,000 W Max AC Power (5 Minutes): 5,500 W Surge AC Power (1 Second): 6,000 W Max DC Current: 26 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97.7 % Transformer: HF MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Data Sheet English

Read more less

The EM115 is our smallest CT operated meter, designed specifically for single phase supplies up to 100 Amps. It comes complete with our T24 split core current transformer rated at 100/5A with a 24mm aperture.  It's quick and easy to install and boasts both a pulse and RS485 Modbus output, perfect for linking to BMS systems. As well as measuring Imported Energy, (kWh), it also measures Exported Energy and Imported & Exported Reactive Energy (kVArh).

Read more less

Part No: PYL-L2-BMU-BASE Storage Systems - Battery Base External BMU for the Force L2 Batteries. Each BMU can take 2 to 4 Force L2 batteries and it is required for comunication between the batteries for all Force L2 system. Supplier Part No: FC0048MA02V00101 Weight: 17.5 kg

Read more less

Details The powerful Sunsnyk 12kW 3ph Hybrid Inverter is a high quality, energy-efficient solution for your power management needs. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. This unique feature sets it apart from other inverters in its class. The Sunsnyk 12kW 3ph Hybrid Inverter also boasts excellent charging current capabilities, with a maximum charging and discharging current of 250A. It also features improved voltage stability through frequency droop control, allowing for reliable power management in a variety of settings. This inverter is also easily expandable, with the capability to connect up to 4 inverters in parallel. Its interactive display and WiFi compatibility with RS485 Wi-Fi interface make it easy to monitor and manage your power supply. With a 5 year warranty, the Sunsnyk 12kW 3ph Hybrid Inverter offers peace-of-mind and long-lasting, reliable performance. Features : Excellent charging current - Maximum charging/discharging current of 250A Improved voltage stability - Frequency droop control Expand your system - Up to 4 inverters in parallel Easy to monitor - Interactive display WiFi compatible - RS485 Wi-Fi interface Peace-of-mind - 5 year warranty

Read more less