Products

The Stiebel Eltron WPE-I 15 H 230 Premium Pack contains contains a 15kw ground source heat pump, a 290L cylinder and freestanding 100L buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump Made in Germany, Stiebel Eltron's exceptionally high quality and efficient WPE-I H Premium inverter geothermal heat pumps are neat, quiet and reliable. The device uses the heat from the ground for heating and hot water operation providing year-round constant heat output with high flow temperatures of up to 75°C. They are a future-proof and environmentally friendly refrigerant and contain the option for integration into the home network and control via a smartphone. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPE-I 15 H 230 Premium Pack Product number 204404 Pack warranty 7 years* Kit Includes 1 15kW Ground sourceheat pump WPE-I 15 H 230 Premium 238613 1 300L cylinder SBB 302 WP (GB) Set 228945 1 100L buffer SBP 100 classic 235200 1 Central heating pump WPKI-HK E 233602 2 Strainer FS-WP 28 233512 1 Digital Thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Bronze potable pump  UP 25-60 B 056899 2 Temperature sensor PT 1000 235996 1 Ground loop filling kit WPSF 233307 Heat Pump Technical Information Product name WPE-I 15 H 230 Premium Product number 238613 Heating output at B0/W35 5,18 kW COP at B0/W35 4.86 SCOP 5.44 Sound power level 39 - 47 dB(A) Refrigerant R454C Height 1369mm Width 598mm Depth 658mm Net Weight 190kg Cylinder Technical Information Product name SBB 302 WP (GB) Set Product number 228945 Capacity 290L Weight 184kg Weight full 374kg Height 1770mm Diameter 700mm Buffer seperate, see below Coil surface area 4.80m2 ERP Band C Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

  The Stiebel Eltron WPE-I 15 HW 230 Premium Pack contains contains a 15kw ground source heat pump with combined 175L hot water cylinder and freestanding 100L buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump Made in Germany, Stiebel Eltron's exceptionally high quality and efficient WPE-I HW Premium inverter geothermal heat pump plus hot water cylinder are neat, quiet and reliable. The heat pump uses the heat from the ground for heating and hot water operation providing year-round constant heat output with high flow temperatures of up to 75°C. They are a future-proof and environmentally friendly refrigerant and contain the option for integration into the home network and control via a smartphone. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPE-I 15 HW 230 Premium Pack Product number 204408 Pack warranty 7 years* Kit Includes 1 15kW Ground sourceheat pump with cylinder WPE-I 15 HW 230 Premium 202641 1 100L buffer SBP 100 classic 235200 1 Central heating pump WPKI-HK E 233602 1 Strainer FS-WP 22 233511 1 Digital Thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Ground loop filling kit WPSF 233307 Heat Pump Technical Information Product name WPE-I 12 HW 230 Premium Product number 202641 Heating output at B0/W35 5,18 kW Minimum heating at B0/W35 2,1 kW Maximum heating at B0/W35 14,8 kW COP at B0/W35 4.86 SCOP 5.44 Sound power level 43 - 49 dB(A) Refrigerant R454C Cylinder capacity 162L Heat exchanger surface area 3.50m2 Height 1937mm Width 600mm Depth 703mm Net Weight 75kg Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The WPKI-HK E is an insulated pump assembly for one heating circuit without a mixer, with an integral HE circulation pump and shut-off valves with thermometer and gravity-brake, including an opening mechanism. The assembly includes a white wall mounting bracket cover, and is suitable for a buffer cylinder or wall-mounted installation.  The most comprehensive and up-to-date information for this product can be found on the Stiebel Eltron TOOLBOX.   Product Information Product name WPKI-HK E Product number 233602 Head 7m Max throughput 3.3 m3/h Energy efficiency index 0.2 Connection top G 1 Connection bottom G 1 1/2 A Height 420mm Width 250mm Depth 269mm Warranty 7 years* *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPL 17 ACS Classic Pack 1 contains contains an 8kw heat pump and 180L cylinder without buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump Thanks to its exceptionally quiet operation, the WPL 17 ACS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of 60°C, and offer first class efficiency even in temperatures well below freezing. Cylinder All of the components of the HSBB 180 integral cylinder interact perfectly: they are exactly matched to one another, offer a long service life, save space, and provide a system with high levels of efficiency and reliability. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOL BOX and search for the different components. Pack Information Product name WPL Classic Pack 1 Product number 204915 Pack warranty 7 years* Kit Includes 1 8kW Heat pump WPL 17 ACS classic 235922 1 180L Cylinder HSBB 180 S Plus (GB) 204552 1 Thermostat FET 234723 1 Internet service gateway  ISG web 229336 1 Bypass valve Bypass valve 234027 In addition to the pack, one of the following mounting options needs to be selected and purchased separately: Wall mounting bracket WK1, 238686 Mounting feet SK-2, 236693 Pack Information Product name WPL 17 ACS Classic Pack 1 Product number 204915 Pack warranty 7 years* Heat Pump Technical Information Product name WPL 17 ACS classic Product number 235922 MCS listed SCOPs @35°C 4.33 @40°C 4.03 @45°C 3.73 @50°C 3.36 @55°C 2.98 Heating nominal capacity 8.00kW Heating output at A-7/W35 7.80kW Compressor type Rotary piston Refrigerant Type R410A Refrigerant Volume 2kg Required flow rate 10L/m Heating up to 60°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 57dBA Height 812mm Width 1152mm Depth 524mm Net Weight 91kg Cylinder Technical Information Product name HSBB 180 S Plus (GB) Product number 204552 Capacity 178L Weight 100kg Weight full 278kg Height 1309mm Width 605mm Diameter 917mm Buffer no buffer Coil surface area 1.59m2 ERP Band B *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPL 17 ACS Classic Pack 2 contains contains an 8kw heat pump and 180L cylinder without buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump Thanks to its exceptionally quiet operation, the WPL 17 ACS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of 60°C, and offer first class efficiency even in temperatures well below freezing. Cylinder All of the components of the HSBB 180 integral cylinder interact perfectly: they are exactly matched to one another, offer a long service life, save space, and provide a system with high levels of efficiency and reliability. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOL BOX and search for the different components.  Pack Information Product name WPL Classic Pack 2 Product number 204916 Pack warranty 7 years* Kit Includes 1 8kW Heat pump WPL 17 ACS classic 235922 1 180L Cylinder HSBC 180 Plus (GB) 204551 1 Thermostat FET 234723 1 Internet service gateway  ISG web 229336 In addition to the pack, one of the following mounting options needs to be selected and purchased separately: Wall mounting bracket WK1, 238686 Mounting feet SK-2, 236693 Pack Information Product name WPL 17 ACS Classic Pack 1 Product number 204915 Pack warranty 7 years* Heat Pump Technical Information Product name WPL 17 ACS classic Product number 235922 MCS listed SCOPs @35°C 4.33 @40°C 4.03 @45°C 3.73 @50°C 3.36 @55°C 2.98 Heating nominal capacity 8.00kW Heating output at A-7/W35 7.80kW Compressor type Rotary piston Refrigerant Type R410A Refrigerant Volume 2kg Required flow rate 10L/m Heating up to 60°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 57dBA Height 812mm Width 1152mm Depth 524mm Net Weight 91kg Cylinder Technical Information Product name HSBC 180 Plus (GB) Product number 204551 Capacity 178L Buffer capacity 80L Weight 134kg Weight full 392kg Height 1910mm Width 605mm Diameter 917mm Buffer Inbuilt buffer Coil surface area 1.59m2 Standby energy consumption @ 65°C 53.75 *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPL 17 ACS Classic Pack 4 contains contains an 8kw heat pump and 180L cylinder without buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump Thanks to its exceptionally quiet operation, the WPL 17 ACS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of 60°C, and offer first class efficiency even in temperatures well below freezing. Cylinder All of the components of the HSBB 180 integral cylinder interact perfectly: they are exactly matched to one another, offer a long service life, save space, and provide a system with high levels of efficiency and reliability. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOL BOX and search for the different components. Pack Information Product name WPL Classic Pack 4 Product number 204918 Pack warranty 7 years* Kit Includes 1 8kW Heat pump WPL 17 ACS Classic 235922 1 300L Cylinder SBB 300-1 Plus GB 202923 1 100L buffer SBP 100 classic 235200 1 Thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Pump UP 25 / 7.5 PCV 201620 1 Hydraulic module HMS Trend 233826 In addition to the pack, one of the following mounting options needs to be selected and purchased separately: Wall mounting bracket WK1, 238686 Mounting feet SK-2, 236693 Pack Information Product name WPL 17 ACS Classic Pack 4 Product number 204918 Pack warranty 7 years* Heat Pump Technical Information Product name WPL 17 ACS classic Product number 235922 MCS listed SCOPs @35°C 4.33 @40°C 4.03 @45°C 3.73 @50°C 3.36 @55°C 2.98 Heating nominal capacity 8.00kW Heating output at A-7/W35 7.80kW Compressor type Rotary piston Refrigerant Type R410A Refrigerant Volume 2kg Required flow rate 10L/m Heating up to 60°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 57dBA Height 812mm Width 1152mm Depth 524mm Net Weight 91kg Cylinder Technical Information Product name SBB 300-1 Plus GB Product number 202923 Capacity 315L Weight 111kg Weight full 426kg Height 1619mm Diameter 650mm Buffer seperate, see below Coil surface area 2.00m2 ERP Band B Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

  The Stiebel Eltron WPL 25 ACS Plus Pack 1 contains contains an 13kw heat pump and 170L cylinder with inbuilt 100L buffer along with all the equipment required for a comprehensive heat pump install.  The ACS heat pump provides cooling, if this is not required see the WPL 25 AS. Heat Pump Thanks to its exceptionally quiet operation, the WPL 25 ACS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of up to 65°C, and offer first class efficiency even in temperatures well below freezing. Cylinder The HSBC comprises both a DHW cylinder and a buffer cylinder - halving the installation space otherwise required for individual cylinders. This integral cylinder conveniently covers everything required to match with a heat pump. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPL Plus Pack 1 Product number 204911-ACS Pack warranty 7 years* Kit Includes 1 13kW Heat pump WPL 25 ACS 236643 1 170L Cylinder with buffer HSBC 200 S (GB) 236917 1 Thermostat FET 234723 1 Internet service gateway  ISG web 229336 Heat Pump Technical Information Product name WPL 25 ACS Product number 236643 MCS listed SCOPs @35°C 4.07 @40°C 3.86 @45°C 3.65 @50°C 3.44 @55°C 3.23 Heating nominal capacity 13.00kW Heating output at A-7/W35 12.86kW Compressor type Scroll Refrigerant Type R410A Refrigerant Volume 4.7kg Required flow rate 16.7L/m Heating up to 65°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 55dBA Height 1045mm Width 1490mm Depth 593mm Net Weight 175kg Cylinder Technical Information Product name HSBC 200 S (GB) Product number 236917 Capacity 168L Buffer capacity 100L Weight 203kg Weight full 471kg Height 1908mm Width 680mm Diameter 817mm Buffer Inbuilt buffer Coil surface area 3.30m2 Energy efficiency class B *Standard 2 year warranty, extended to 7 for registered installers  

Read more less

  The Stiebel Eltron WPL 25 ACS Plus Pack 2 contains contains an 13kw heat pump and 170L cylinder with inbuilt 100L buffer along with all the equipment required for a comprehensive heat pump install.  The ACS heat pump provides cooling, if this is not required see the WPL 25 AS. Heat Pump Thanks to its exceptionally quiet operation, the WPL 25 ACS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of up to 65°C, and offer first class efficiency even in temperatures well below freezing. Cylinder The HSBC comprises both a DHW cylinder and a buffer cylinder - halving the installation space otherwise required for individual cylinders. This integral cylinder conveniently covers everything required to match with a heat pump. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPL Plus Pack 2 Product number 204912-ACS Pack warranty 7 years* Kit Includes 1 13kW Heat pump WPL 25 ACS 236643 1 270L Cylinder with buffer HSBC 300 Cool (GB) 204651 1 Thermostat FET 234723 1 Internet service gateway  ISG web 229336 Heat Pump Technical Information Product name WPL 25 ACS Product number 236643 MCS listed SCOPs @35°C 4.07 @40°C 3.86 @45°C 3.65 @50°C 3.44 @55°C 3.23 Heating nominal capacity 13.00kW Heating output at A-7/W35 12.86kW Compressor type Scroll Refrigerant Type R410A Refrigerant Volume 5.5kg Required flow rate 16.7L/m Heating up to 65°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 55dBA Height 1045mm Width 1490mm Depth 593mm Net Weight 175kg Cylinder Technical Information Product name HSBC 300 cool (GB) Product number 204651 Capacity 270L Buffer capacity 100L Weight 250kg Weight full 620kg Height 1918mm Width 680mm Diameter 910mm Buffer Inbuilt buffer Coil surface area 3.20m2 Energy efficiency class B *Standard 2 year warranty, extended to 7 for registered installers

Read more less

  The Stiebel Eltron WPL 25 ACS Plus Pack 3 contains contains an 13kw heat pump and 170L cylinder with inbuilt 100L buffer along with all the equipment required for a comprehensive heat pump install.  The ACS heat pump provides cooling, if this is not required see the WPL 25 AS. Heat Pump Thanks to its exceptionally quiet operation, the WPL 25 ACS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of up to 65°C, and offer first class efficiency even in temperatures well below freezing. Cylinder The HSBC comprises both a DHW cylinder and a buffer cylinder - halving the installation space otherwise required for individual cylinders. This integral cylinder conveniently covers everything required to match with a heat pump. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPL Plus Pack 3 Product number 204913-ACS Pack warranty 7 years* Kit Includes 1 13kW Heat pump WPL 25 ACS 236643 1 290L Cylinder SBB 302 WP (GB) 228945 1 100L buffer tank SBP 100 classic 235200 1 Digital thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Central heating pump WPKI-HK E 233602 1 Heat pump controller WPM 234727 2 Pump  UP 25 / 7.5 PCV 201620 Heat Pump Technical Information Product name WPL 25 ACS Product number 236643 MCS listed SCOPs @35°C 4.07 @40°C 3.86 @45°C 3.65 @50°C 3.44 @55°C 3.23 Heating nominal capacity 13.00kW Heating output at A-7/W35 12.86kW Compressor type Scroll Refrigerant Type R410A Refrigerant Volume 5.5kg Required flow rate 16.7L/m Heating up to 65°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 55dBA Height 1045mm Width 1490mm Depth 593mm Net Weight 175kg Cylinder Technical Information Product name SBB 302 WP (GB) Set Product number 228945 Capacity 290L Weight 184kg Weight full 374kg Height 1770mm Diameter 700mm Buffer seperate, see below Coil surface area 4.80m2 ERP Band C Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

  The Stiebel Eltron WPL 25 ACS Plus Pack 4 contains contains an 13kw heat pump and 170L cylinder with inbuilt 100L buffer along with all the equipment required for a comprehensive heat pump install.  The ACS heat pump provides cooling, if this is not required see the WPL 25 AS. Heat Pump Thanks to its exceptionally quiet operation, the WPL 25 ACS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of up to 65°C, and offer first class efficiency even in temperatures well below freezing. Cylinder The HSBC comprises both a DHW cylinder and a buffer cylinder - halving the installation space otherwise required for individual cylinders. This integral cylinder conveniently covers everything required to match with a heat pump. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPL Plus Pack 4 Product number 204914-ACS Pack warranty 7 years* Kit Includes 1 13kW Heat pump WPL 25 ACS 236643 1 300L Cylinder SBB 302 WP (GB) Set 202924 1 200L buffer tank STH 210 plus 203763 1 Digital thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Central heating pump WPKI-HK E 233602 1 Heat pump controller WPM 234727 1 Pump  UP 25 / 7.5 PCV 201620 1 Bypass valve  Bypass Valve 234027 1 Pipe connection kit BBI 5 Set 236695 1 Pump valves  WPKI 5 Set 205875 Heat Pump Technical Information Product name WPL 25 ACS Product number 236643 MCS listed SCOPs @35°C 4.07 @40°C 3.86 @45°C 3.65 @50°C 3.44 @55°C 3.23 Heating nominal capacity 13.00kW Heating output at A-7/W35 12.86kW Compressor type Scroll Refrigerant Type R410A Refrigerant Volume 5.5kg Required flow rate 16.7L/m Heating up to 65°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 55dBA Height 1045mm Width 1490mm Depth 593mm Net Weight 175kg Cylinder Technical Information Product name SBB 302 WP (GB) Set Product number 228945 Capacity 290L Weight 184kg Weight full 374kg Height 1770mm Diameter 700mm Buffer seperate, see below Coil surface area 4.80m2 ERP Band C Buffer Technical Information Product name STH 210 plus Product number 203763 Capacity 207L Weight 58kg Weight full 265kg Height 1535mm Diameter 630mm Standby energy consumption @ 65°C 45.83W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

  The Stiebel Eltron WPL 25 AS Plus Pack 1 contains contains an 13kw heat pump and 170L cylinder with inbuilt 100L buffer along with all the equipment required for a comprehensive heat pump install.  The AS heat pump cannot provide cooling, if this is required see the WPL 25 ASC. Heat Pump Thanks to its exceptionally quiet operation, the WPL 25 AS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of up to 65°C, and offer first class efficiency even in temperatures well below freezing. Cylinder The HSBC comprises both a DHW cylinder and a buffer cylinder - halving the installation space otherwise required for individual cylinders. This integral cylinder conveniently covers everything required to match with a heat pump. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPL Plus Pack 1 Product number 204911-AS Pack warranty 7 years* Kit Includes 1 13kW Heat pump WPL 25 AS 236642 1 170L Cylinder with buffer HSBC 200 S (GB) 236917 1 Thermostat FET 234723 1 Internet service gateway  ISG web 229336 Heat Pump Technical Information Product name WPL 25 AS Product number 236642 MCS listed SCOPs @35°C 4.07 @40°C 3.86 @45°C 3.65 @50°C 3.44 @55°C 3.23 Heating nominal capacity 13.00kW Heating output at A-7/W35 12.86kW Compressor type Scroll Refrigerant Type R410A Refrigerant Volume 4.7kg Required flow rate 16.7L/m Heating up to 65°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 55dBA Height 1045mm Width 1490mm Depth 593mm Net Weight 175kg Cylinder Technical Information Product name HSBC 200 S (GB) Product number 236917 Capacity 168L Buffer capacity 100L Weight 203kg Weight full 471kg Height 1908mm Width 680mm Diameter 817mm Buffer Inbuilt buffer Coil surface area 3.30m2 Energy efficiency class B *Standard 2 year warranty, extended to 7 for registered installers

Read more less

  The Stiebel Eltron WPL 25 AS Plus Pack 2 contains contains an 13kw heat pump and 270L cylinder with inbuilt 100L buffer along with all the equipment required for a comprehensive heat pump install.  The AS heat pump cannot provide cooling, if this is required see the WPL 25 ACS. Heat Pump Thanks to its exceptionally quiet operation, the WPL 25 AS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of up to 65°C, and offer first class efficiency even in temperatures well below freezing. Cylinder The HSBC comprises both a DHW cylinder and a buffer cylinder - halving the installation space otherwise required for individual cylinders. This integral cylinder conveniently covers everything required to match with a heat pump. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPL Plus Pack 2 Product number 204912-AS Pack warranty 7 years* Kit Includes 1 13kW Heat pump WPL 25 AS 236642 1 270L Cylinder with buffer HSBC 300 Cool (GB) 204651 1 Thermostat FET 234723 1 Internet service gateway  ISG web 229336 Heat Pump Technical Information Product name WPL 25 AS Product number 236642 MCS listed SCOPs @35°C 4.07 @40°C 3.86 @45°C 3.65 @50°C 3.44 @55°C 3.23 Heating nominal capacity 13.00kW Heating output at A-7/W35 12.86kW Compressor type Scroll Refrigerant Type R410A Refrigerant Volume 4.7kg Required flow rate 16.7L/m Heating up to 65°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 55dBA Height 1045mm Width 1490mm Depth 593mm Net Weight 175kg Cylinder Technical Information Product name HSBC 300 cool (GB) Product number 204651 Capacity 270L Buffer capacity 100L Weight 250kg Weight full 620kg Height 1918mm Width 680mm Diameter 910mm Buffer Inbuilt buffer Coil surface area 3.20m2 Energy efficiency class B *Standard 2 year warranty, extended to 7 for registered installers

Read more less

  The Stiebel Eltron WPL 25 AS Plus Pack 3 contains contains an 13kw heat pump and 270L cylinder with inbuilt 100L buffer along with all the equipment required for a comprehensive heat pump install.  The AS heat pump cannot provide cooling, if this is required see the WPL 25 ACS. Heat Pump Thanks to its exceptionally quiet operation, the WPL 25 AS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of up to 65°C, and offer first class efficiency even in temperatures well below freezing. Cylinder The HSBC comprises both a DHW cylinder and a buffer cylinder - halving the installation space otherwise required for individual cylinders. This integral cylinder conveniently covers everything required to match with a heat pump. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPL Plus Pack 3 Product number 204913-AS Pack warranty 7 years* Kit Includes 1 13kW Heat pump WPL 25 AS 236642 1 290L Cylinder SBB 302 WP (GB) 228945 1 100L buffer tank SBP 100 classic 235200 1 Digital thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Central heating pump WPKI-HK E 233602 1 Heat pump controller WPM 234727 2 Pump  UP 25 / 7.5 PCV 201620 Heat Pump Technical Information Product name WPL 25 AS Product number 236642 MCS listed SCOPs @35°C 4.07 @40°C 3.86 @45°C 3.65 @50°C 3.44 @55°C 3.23 Heating nominal capacity 13.00kW Heating output at A-7/W35 12.86kW Compressor type Scroll Refrigerant Type R410A Refrigerant Volume 4.7kg Required flow rate 16.7L/m Heating up to 65°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 55dBA Height 1045mm Width 1490mm Depth 593mm Net Weight 175kg Cylinder Technical Information Product name SBB 302 WP (GB) Set Product number 228945 Capacity 290L Weight 184kg Weight full 374kg Height 1770mm Diameter 700mm Buffer seperate, see below Coil surface area 4.80m2 ERP Band C Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

  The Stiebel Eltron WPL 25 AS Plus Pack 4 contains contains an 13kw heat pump and 270L cylinder with inbuilt 100L buffer along with all the equipment required for a comprehensive heat pump install.  The AS heat pump cannot provide cooling, if this is required see the WPL 25 ACS. Heat Pump Thanks to its exceptionally quiet operation, the WPL 25 AS heat pump can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. Thanks to its high quality individual parts, these models reach an output level that enables flow temperatures of up to 65°C, and offer first class efficiency even in temperatures well below freezing. Cylinder The HSBC comprises both a DHW cylinder and a buffer cylinder - halving the installation space otherwise required for individual cylinders. This integral cylinder conveniently covers everything required to match with a heat pump. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPL Plus Pack 4 Product number 204914-AS Pack warranty 7 years* Kit Includes 1 13kW Heat pump WPL 25 AS 236642 1 300L Cylinder SBB 302 WP (GB) Set 202924 1 200L buffer tank STH 210 plus 203763 1 Digital thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Central heating pump WPKI-HK E 233602 1 Heat pump controller WPM 234727 1 Pump  UP 25 / 7.5 PCV 201620 1 Bypass valve  Bypass Valve 234027 1 Pipe connection kit BBI 5 Set 236695 1 Pump valves  WPKI 5 Set 205875 Heat Pump Technical Information Product name WPL 25 AS Product number 236642 MCS listed SCOPs @35°C 4.07 @40°C 3.86 @45°C 3.65 @50°C 3.44 @55°C 3.23 Heating nominal capacity 13.00kW Heating output at A-7/W35 12.86kW Compressor type Scroll Refrigerant Type R410A Refrigerant Volume 4.7kg Required flow rate 16.7L/m Heating up to 65°c Min operating temperature -20°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 55dBA Height 1045mm Width 1490mm Depth 593mm Net Weight 175kg Cylinder Technical Information Product name SBB 302 WP (GB) Set Product number 228945 Capacity 290L Weight 184kg Weight full 374kg Height 1770mm Diameter 700mm Buffer seperate, see below Coil surface area 4.80m2 ERP Band C Buffer Technical Information Product name STH 210 plus Product number 203763 Capacity 207L Weight 58kg Weight full 265kg Height 1535mm Diameter 630mm Standby energy consumption @ 65°C 45.83W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPL-A 07 HK 230 Premium pack 5 contains contains a 7kw heat pump and 180L cylinder without buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump This new design is top of the range, suitable not only for hot water and heating but also for cooling in the summer months.  Since the inverter unit achieves high flow temperatures even at very low outside temperatures of down to –25 °C, it is equally suitable for use in new build and renovation projects. The WPL-A HK Premium contains a futureproof refrigerant and thanks to its exceptionally quiet operation, it can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. The high flow temperatures of up to 75 °C enable high DHW temperatures and mixed water volumes and the inverter technology provides adjusted heating output. These heat pump are highly efficienct keeping the running costs low and the kit is smart grid ready allowing for easy install.  Cylinder All of the components of the HSBB 180 integral cylinder interact perfectly: they are exactly matched to one another, offer a long service life, save space, and provide a system with high levels of efficiency and reliability. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOL BOX and search for the different components. Pack Information Product name WPL-A Premium Pack 5 Product number 204904 Pack warranty 7 years* Kit Includes 1 7kW Heat pump WPL- A 07 HK 230 200123 1 180L Cylinder HSBB 180 S Plus (GB) 204552 1 Thermostat FET 234723 1 Internet service gateway  ISG web 229336 1 Bypass valve Bypass valve 234027 Heat Pump Technical Information Product name WPL- A 07 HK 230 Product number 200123 MCS listed SCOPs @35°C 4.66 @40°C 4.43 @45°C 4.21 @50°C 3.95 @55°C 3.69 Heating nominal capacity 7.00kW Heating output at A-7/W35 6.87kW Compressor type Rotary piston Refrigerant Type R454C Refrigerant Volume 3kg Required flow rate 10.7L/m Heating up to 75°c Min operating temperature -22°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 48dBA Height 900mm Width 1270mm Depth 593mm Net Weight 135kg Cylinder Technical Information Product name HSBB 180 S Plus (GB) Product number 204552 Capacity 178L Weight 100kg Weight full 278kg Height 1309mm Width 605mm Diameter 917mm Buffer no buffer Coil surface area 1.59m2 ERP Band B *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPL-A 07 HK 230 Premium pack 6 contains contains a 7kw heat pump and 180L cylinder without buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump This new design is top of the range, suitable not only for hot water and heating but also for cooling in the summer months.  Since the inverter unit achieves high flow temperatures even at very low outside temperatures of down to –25 °C, it is equally suitable for use in new build and renovation projects. The WPL-A HK Premium contains a futureproof refrigerant and thanks to its exceptionally quiet operation, it can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. The high flow temperatures of up to 75 °C enable high DHW temperatures and mixed water volumes and the inverter technology provides adjusted heating output. These heat pump are highly efficienct keeping the running costs low and the kit is smart grid ready allowing for easy install.  Cylinder All of the components of the HSBB 180 integral cylinder interact perfectly: they are exactly matched to one another, offer a long service life, save space, and provide a system with high levels of efficiency and reliability. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOL BOX and search for the different components. Pack Information Product name WPL-A Premium Pack 6 Product number 204905 Pack warranty 7 years* Kit Includes 1 7kW Heat pump WPL- A 07 HK 230 200123 1 180L Cylinder with buffer HSBC 180 Plus (GB) 204551 1 Thermostat FET 234723 1 Internet service gateway  ISG web 229336 Heat Pump Technical Information Product name WPL- A 07 HK 230 Product number 200123 MCS listed SCOPs @35°C 4.66 @40°C 4.43 @45°C 4.21 @50°C 3.95 @55°C 3.69 Heating nominal capacity 7.00kW Heating output at A-7/W35 6.87kW Compressor type Rotary piston Refrigerant Type R454C Refrigerant Volume 3kg Required flow rate 10.7L/m Heating up to 75°c Min operating temperature -22°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 48dBA Height 900mm Width 1270mm Depth 593mm Net Weight 135kg Cylinder Technical Information Product name HSBC 180 Plus (GB) Product number 204551 Capacity 178L Buffer capacity 80L Weight 134kg Weight full 392kg Height 1910mm Width 605mm Diameter 917mm Buffer Inbuilt buffer Coil surface area 1.59m2 Standby energy consumption @ 65°C 53.75 *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPL-A 07 HK 230 Premium pack 7 contains contains a 7kw heat pump and 180L cylinder without buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump This new design is top of the range, suitable not only for hot water and heating but also for cooling in the summer months.  Since the inverter unit achieves high flow temperatures even at very low outside temperatures of down to –25 °C, it is equally suitable for use in new build and renovation projects. The WPL-A HK Premium contains a futureproof refrigerant and thanks to its exceptionally quiet operation, it can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. The high flow temperatures of up to 75 °C enable high DHW temperatures and mixed water volumes and the inverter technology provides adjusted heating output. These heat pump are highly efficienct keeping the running costs low and the kit is smart grid ready allowing for easy install.  Cylinder All of the components of the HSBB 180 integral cylinder interact perfectly: they are exactly matched to one another, offer a long service life, save space, and provide a system with high levels of efficiency and reliability. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOL BOX and search for the different components. Pack Information Product name WPL-A Premium Pack 7 Product number 204906 Pack warranty 7 years* Kit Includes 1 7kW Heat pump WPL- A 07 HK 230 200123 1 170L Cylinder with buffer HSBC 200 S (GB) 236917 1 Thermostat FET 234723 1 Internet service gateway  ISG web 229336 Heat Pump Technical Information Product name WPL- A 07 HK 230 Product number 200123 MCS listed SCOPs @35°C 4.66 @40°C 4.43 @45°C 4.21 @50°C 3.95 @55°C 3.69 Heating nominal capacity 7.00kW Heating output at A-7/W35 6.87kW Compressor type Rotary piston Refrigerant Type R454C Refrigerant Volume 3kg Required flow rate 10.7L/m Heating up to 75°c Min operating temperature -22°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 48dBA Height 900mm Width 1270mm Depth 593mm Net Weight 135kg Cylinder Technical Information Product name HSBC 200 S (GB) Product number 236917 Capacity 168L Buffer capacity 100L Weight 203kg Weight full 471kg Height 1908mm Width 680mm Diameter 817mm Buffer Inbuilt buffer Coil surface area 3.30m2 Energy efficiency class B *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPL-A 07 HK 230 Premium pack 8 contains contains a 7kw heat pump and 180L cylinder without buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump This new design is top of the range, suitable not only for hot water and heating but also for cooling in the summer months.  Since the inverter unit achieves high flow temperatures even at very low outside temperatures of down to –25 °C, it is equally suitable for use in new build and renovation projects. The WPL-A HK Premium contains a futureproof refrigerant and thanks to its exceptionally quiet operation, it can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. The high flow temperatures of up to 75 °C enable high DHW temperatures and mixed water volumes and the inverter technology provides adjusted heating output. These heat pump are highly efficienct keeping the running costs low and the kit is smart grid ready allowing for easy install.  Cylinder All of the components of the HSBB 180 integral cylinder interact perfectly: they are exactly matched to one another, offer a long service life, save space, and provide a system with high levels of efficiency and reliability. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOL BOX and search for the different components. Pack Information Product name WPL-A Premium Pack 8 Product number 204907 Pack warranty 7 years* Kit Includes 1 7kW Heat pump WPL- A 07 HK 230 200123 1 270L Cylinder with buffer HSBC 300 cool (GB) 204651 1 Thermostat FET 234723 1 Internet service gateway  ISG web 229336 Heat Pump Technical Information Product name WPL- A 07 HK 230 Product number 200123 MCS listed SCOPs @35°C 4.66 @40°C 4.43 @45°C 4.21 @50°C 3.95 @55°C 3.69 Heating nominal capacity 7.00kW Heating output at A-7/W35 6.87kW Compressor type Rotary piston Refrigerant Type R454C Refrigerant Volume 3kg Required flow rate 10.7L/m Heating up to 75°c Min operating temperature -22°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 48dBA Height 900mm Width 1270mm Depth 593mm Net Weight 135kg Cylinder Technical Information Product name HSBC 300 cool (GB) Product number 204651 Capacity 270L Buffer capacity 100L Weight 250kg Weight full 620kg Height 1918mm Width 680mm Diameter 910mm Buffer Inbuilt buffer Coil surface area 3.20m2 Energy efficiency class B *Standard 2 year warranty, extended to 7 for registered installers

Read more less

The Stiebel Eltron WPL-A 07 HK 230 Premium pack 9 contains contains a 7kw heat pump and 180L cylinder without buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump This new design is top of the range, suitable not only for hot water and heating but also for cooling in the summer months.  Since the inverter unit achieves high flow temperatures even at very low outside temperatures of down to –25 °C, it is equally suitable for use in new build and renovation projects. The WPL-A HK Premium contains a futureproof refrigerant and thanks to its exceptionally quiet operation, it can be sited even in densely built-up areas, especially as an outdoor installation requiring minimal valuable indoor space. The high flow temperatures of up to 75 °C enable high DHW temperatures and mixed water volumes and the inverter technology provides adjusted heating output. These heat pump are highly efficienct keeping the running costs low and the kit is smart grid ready allowing for easy install.  Cylinder All of the components of the HSBB 180 integral cylinder interact perfectly: they are exactly matched to one another, offer a long service life, save space, and provide a system with high levels of efficiency and reliability. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOL BOX and search for the different components. Pack Information Product name WPL-A Premium Pack 9 Product number 204908 Pack warranty 7 years* Kit Includes 1 7kW Heat pump WPL- A 07 HK 230 200123 1 300L Cylinder SBB 300-1 Plus GB 202923 1 100L buffer SBP 100 classic 235200 1 Thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Central heating pump WPKI-HK E 233602 2 Pump UP 25 / 7.5 PCV 201620 1 Heat pump Controller WPM 234727 Heat Pump Technical Information Product name WPL- A 07 HK 230 Product number 200123 MCS listed SCOPs @35°C 4.66 @40°C 4.43 @45°C 4.21 @50°C 3.95 @55°C 3.69 Heating nominal capacity 7.00kW Heating output at A-7/W35 6.87kW Compressor type Rotary piston Refrigerant Type R454C Refrigerant Volume 3kg Required flow rate 10.7L/m Heating up to 75°c Min operating temperature -22°c Max operating temperature 40°c Electricity Supply 220-240V Sound Power Level 48dBA Height 900mm Width 1270mm Depth 593mm Net Weight 135kg Cylinder Technical Information Product name SBB 300-1 Plus GB Product number 202923 Capacity 315L Weight 111kg Weight full 426kg Height 1619mm Diameter 650mm Buffer seperate, see below Coil surface area 2.00m2 ERP Band B Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

  The Stiebel Eltron WPE-I 04 HW 230 Premium Pack contains contains a 4kw ground source heat pump with combined 175L hot water cylinder and freestanding 100L buffer along with all the equipment required for a comprehensive heat pump install.  Heat Pump Made in Germany, Stiebel Eltron's exceptionally high quality and efficient WPE-I HW Premium inverter geothermal heat pump plus hot water cylinder are neat, quiet and reliable. The heat pump uses the heat from the ground for heating and hot water operation providing year-round constant heat output with high flow temperatures of up to 75°C. They are a future-proof and environmentally friendly refrigerant and contain the option for integration into the home network and control via a smartphone. For the most comprehensive and up-to-date information on all the products in this pack, head to the Stiebel Eltron TOOLBOX and search for the different components. Pack Information Product name WPE-I 06 HW 230 Premium Pack Product number 204400 Pack warranty 7 years* Kit Includes 1 6kW Ground sourceheat pump with cylinder WPE-I 06 HW 230 Premium 202638 1 100L buffer SBP 100 classic 235200 1 Central heating pump WPKI-HK E 233602 1 Strainer FS-WP 22 233511 1 Digital Thermostat FET 234723 1 Internet service gateway ISG web 229336 1 Ground loop filling kit WPSF 233307 Heat Pump Technical Information Product name WPE-I 06 HW 230 Premium Product number 202638 Heating output at B0/W35 2,37 kW Minimum heating at B0/W35 1,0 kW Maximum heating at B0/W35 6,6 kW COP at B0/W35 4.60 SCOP 5.20 Sound power level 43 - 48 dB(A) Refrigerant R454C Cylinder capacity 175L Heat exchanger surface area 2.10m2 Height 1937mm Width 600mm Depth 703mm Net Weight 265kg Buffer Technical Information Product name SBP 100 classic Product number 235200 Capacity 100L Weight 21kg Weight full 121kg Height 877mm Diameter 510mm Standby energy consumption @ 65°C 50W *Standard 2 year warranty, extended to 7 for registered installers

Read more less

Part No: SE-3680H-APP-AC Storage Systems - Charger-Inverter AC coupled storage inverter with HD-Wave Technology and SetAPP  This inverter can be used directly with SolarEdge Energy Bank or with LG Chem RESU High Voltage battery when combined with StorEdge Interface STI-S4. SolarEdge energy meter and a suitable CT are required for the correct operation of the system. - AC coupling means it’s perfectly suited for sites with 1.      Three-phase SolarEdge PV inverters and 2.      Non-SolarEdge PV inverters or 3.      No PV at all. - Monitor battery status, PV inverter production, and self-consumption data for full visibility - IP65 – Outdoor and indoor installation Please note: This inverter does not have a display; commissioning needs to be done using Solar Edge SetAPP mobile application.   Supplier Part No:SE3680H-RWSACBNN4 Weight:7.8 kg Rated Power:3,680 W

Read more less

Part No: SE-5000H-APP-AC Storage Systems - Charger-Inverter AC coupled storage inverter with HD-Wave Technology and SetAPP  This inverter can be used directly with SolarEdge Energy Bank or with LG Chem RESU High Voltage battery when combined with StorEdge Interface STI-S4. SolarEdge energy meter and a suitable CT are required for the correct operation of the system. - AC coupling means it’s perfectly suited for sites with 1.      Three-phase SolarEdge PV inverters and 2.      Non-SolarEdge PV inverters or 3.      No PV at all. - Monitor battery status, PV inverter production, and self-consumption data for full visibility - IP65 – Outdoor and indoor installation Please note: This inverter does not have a display; commissioning needs to be done using Solar Edge SetAPP mobile application.   Supplier Part No:SE5000H-RWSACBNN4 Weight:10.96 kg Rated Power:5,000 W

Read more less

Part No: SE-3680H-NET-AC Storage Systems - Charger-Inverter AC coupled storage inverter with HD-Wave Technology and SetAPP  This inverter can be used directly with SolarEdge Energy Bank or with LG Chem RESU High Voltage battery when combined with StorEdge Interface STI-S4. SolarEdge energy meter and a suitable CT are required for the correct operation of the system. - AC coupling means it’s perfectly suited for sites with 1.      Three-phase SolarEdge PV inverters and 2.      Non-SolarEdge PV inverters or 3.      No PV at all. - Monitor battery status, PV inverter production, and self-consumption data for full visibility - IP65 – Outdoor and indoor installation Please note: This inverter does not have a display; commissioning needs to be done using Solar Edge SetAPP mobile application.   Supplier Part No:SE3680H-RWSACBEN4 Weight:7.8 kg Rated Power:3,680 W

Read more less

Part No: SE-5000H-NET-AC Storage Systems - Charger-Inverter AC coupled storage inverter with HD-Wave Technology and SetAPP  This inverter can be used directly with SolarEdge Energy Bank or with LG Chem RESU High Voltage battery when combined with StorEdge Interface STI-S4. SolarEdge energy meter and a suitable CT are required for the correct operation of the system. - AC coupling means it’s perfectly suited for sites with 1.      Three-phase SolarEdge PV inverters and 2.      Non-SolarEdge PV inverters or 3.      No PV at all. - Monitor battery status, PV inverter production, and self-consumption data for full visibility - IP65 – Outdoor and indoor installation Please note: This inverter does not have a display; commissioning needs to be done using Solar Edge SetAPP mobile application.   Supplier Part No:SE5000H-RWSACBEN4 Weight:10.96 kg Rated Power:5,000 W

Read more less

Part No: REN-900220 Mounting - Storm Washers Technical Data Applicational Data Material Dimensions Weight Compatible EPDM pre-assembled Port diameter 7.3 mm Radius: 24 mm Aluminium EPDM 45 x 40 x 12 mm 0,008 kg Solar fasteners   Keywords: REN900220, Renusol, PV Mounting, Storm Washer   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:900220 Weight:0.01 kg

Read more less

Part No: REN-900205 Mounting - Storm Washers Technical Data Applicational Data Material Dimensions Weight Compatible EPDM pre-assembled Port diameter 7.3 mm Angle: 15° Aluminium EPDM 45 x 23 x 9 mm 0,006 kg Solar fasteners   Keywords: REN900205, Renusol, PV Mounting, Storm Washer   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:900205 Weight:0.001 kg

Read more less

Part No: REN-900211 Mounting - Storm Washers Technical Data Applicational Data Material Dimensions Weight Compatible EPDM pre-assembled Port diameter 7.3 mm Angle: 30° Aluminium EPDM 45 x 23 x 9 mm 0,006 kg Solar fasteners   Keywords: REN900205, Renusol, PV Mounting, Storm Washer   Supplier Part No:900211 Weight:0.006 kg

Read more less

Part No: REN-500453 Mounting - Flat Roof Streamliner for FS10-S This streamliner version is for hoizontal (landscape) module orientation. It supports modules of up to 2100mm in length with 25mm overlap on ridge or 2175mm without 25mm overlap on ridge support.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:500453 Weight:3.55 kg Length:2.16 m

Read more less

Part No: REN-500457 Mounting - Flat Roof Streamliner for FS18-S   500454 This streamliner version is for 18deg mounting angle and supports modules of up to 1750mm in length (with 25mm overlap on ridge) or 1825mm w(ithout 25 mm overlap on ridge support).  Product Features Single part, improving stockholding Easier installation due to less necessary screws Compatible with longer modules   Supplier Part No:REN-500457 Weight:3.375 kg Length:2.15 m

Read more less

Part No: REN-500459 Mounting - Flat Roof Streamliner for FS18-S  REN-500459 This streamliner version is for 18deg mounting angle and supports modules of up to 1875mm in length (with 25mm overlap on ridge) or 1825mm w(ithout 25 mm overlap on ridge support).  Product Features Single part, improving stockholding Easier installation due to less necessary screws Compatible with longer modules   FS10-S XL 1825 mm 1900 mm 500459 - 1875 mm   Supplier Part No:REN-500456 Weight:4.36 kg Length:1.88 m

Read more less

Part No: REN-500455 Mounting - Flat Roof This streamliner version is for 18deg mounting angle and supports modules of up to 1700mm in length. fs10 fs18   Supplier Part No:500455 Weight:6.56 kg Length:1.8 m

Read more less

Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 150 e would typically be installed in a 1-2 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications Product Code SKP-AAW-AVZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 142L Water available at 40°C 199L Weight in use 139kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28W Energy efficiency rating C Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 1,398kWh/annum

Read more less

  Thermino ePV (UniQ eHW +iPV) - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 150 ePV would typically be installed in a 1-2 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump General Specifications Product Code SKP-BAW-ATZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 140L Water available at 40°C 199L Weight in use 139kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28.1W Energy efficiency rating C Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 1,398kWh/annum

Read more less

  Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 150 i would typically be installed in a 1-2 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp General Specifications Product Code DKP-CBW-AVZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 142L Water available at 40°C 185L Weight in use 136kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28.1W Energy efficiency rating A+ Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

Thermino iPV (UniQ HW +iPV) uses an external heating source (e.g. a boiler) as a main source of heat, and surplus PV energy to provide an AC power supply, which is supplied to the electric heater inside the Heat Battery. This is a great way to add water storage and increase the self-consumption of a PV system. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. Only the Myenergi Eddi an be used as an immersion controller at present. The Thermino 150 iPV would typically be installed in a 1-2 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs:  Grid electricity - Secondary SourceBoiler - Primary SourceSolar Panels - Secondary SourceHeat Pump - Some high temp   General Specifications Product Code DKP-DBW-ATZ-1 Equivalent energy storage 7.0kWh Equivalent hot water capacity 142L Water available at 40°C 185L Weight in use 136kg Height 640mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 28.1W Energy efficiency rating A+ Recommended flow rate 15LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

  Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 210 e would typically be installed in a 3 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications - Product Code SNP-AAW-AVZ-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 301L Weight in use 178kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32W Energy efficiency rating C Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,690kWh/annum

Read more less

Thermino ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 210 e would typically be installed in a 3 bedroom property as a rule of thumb. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump General Specifications Product Code SNP-BAW-ATY-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 301L Weight in use 178kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32W Energy efficiency rating C Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,690kWh/annum  

Read more less

  Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 210 i would typically be installed in a 3 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp General Specifications Product Code DNP-CBW-AVZ-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 300L Weight in use 187kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32.1W Energy efficiency rating A+ Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

Thermino iPV uses an external heating source (e.g. a boiler) as a main source of heat, and surplus PV energy to provide an AC power supply, which is supplied to the electric heater inside the Heat Battery. This is a great way to add water storage and increase the self-consumption of a PV system. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. Only the Myenergi Eddican be used as an immersion controller at present. The Thermino 210 iPV would typically be installed in a 3 bedroom property.   Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs:  Grid electricity - Secondary SourceBoiler - Primary SourceSolar Panels - Secondary SourceHeat Pump - Some high temp   General Specifications Product Code DKP-DBW-ATZ-1 Equivalent energy storage 10.5kWh Equivalent hot water capacity 212L Water available at 40°C 300 Weight in use 187kg Height 870mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 32.1W Energy efficiency rating A+ Recommended flow rate 20LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

 Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 300 e would typically be installed in a 4-5 bedroom property.   Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications Product Code DRP-AAW-AVZ-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 306L Water available at 40°C 436L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating C Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,701kWh/annum

Read more less

  Thermino ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 300 ePV would typically be installed in a 4-5 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump   General Specifications Product Code DRP-BAW-ATY-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 306L Water available at 40°C 436L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating C Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 2,701kWh/annum

Read more less

 Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 300 i would typically be installed in a 4-5 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp General Specifications Product Code DRP-CBW-AVZ-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 284L Water available at 40°C 370L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating A+ Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

Thermino iPV uses an external heating source (e.g. a boiler) as a main source of heat, and surplus PV energy to provide an AC power supply, which is supplied to the electric heater inside the Heat Battery. This is a great way to add water storage and increase the self-consumption of a PV system. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. Only the Myenergi Eddi can be used as an immersion controller at present. The Thermino 300 iPV would typically be installed in a 4-5 bedroom property. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs:  Grid electricity - Secondary SourceBoiler - Primary SourceSolar Panels - Secondary SourceHeat Pump - Some high temp   General Specifications Product Code DKP-DBW-ATZ-1 Equivalent energy storage 14.0kWh Equivalent hot water capacity 284L Water available at 40°C 370L Weight in use 233kg Height 1050mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 35W Energy efficiency rating A+ Recommended flow rate 25LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

Thermino e - Designed to produce domestic hot water and is heated directly by grid electricity only. This can be used as a space saving and flexible alternative to a hot water tank with an immersion heater. When combined with a charge timer and a variable electricity tariff, the Thermino e range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 70 ePV would typically be installed in a studio apartment, or for off-grid applications in a caravan or boat. Note, the Sunamp is very heavy:   Tilting it beyond 45 degrees may damage the unit and void your warranty. Power Inputs: Grid electricity Boiler Solar Panels Heat Pump   General Specifications Product Code SGP-AAW-AVZ-1 Equivalent energy storage 3.2kWh Equivalent hot water capacity 74L Water available at 40°C 105L Weight in use 79kg Height 440mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 20W Energy efficiency rating C Recommended flow rate 6LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 542kWh/annum

Read more less

Thermino 70 ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 70 ePV would typically be installed in a studio apartment, or for off-grid applications in a caravan or boat. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs:  Grid electricity - Secondary sourceBoilerSolar Panels - Primary SourceHeat Pump General Specifications Product Code SGP-BAW-ATZ-1 Energy capacity 3.2kWh Equivalent hot water capacity 74L Water available at 40°C 105L Weight in use 79kg Height 440mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 20W Energy efficiency rating C Recommended flow rate 6LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Annual electricity consumption 542kWh/annum

Read more less

  Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location. The Thermino 70 ePV would typically be installed in a studio apartment, or for off-grid applications in a caravan or boat. Note, the Sunamp is very heavy: Tilting it beyond 45 degrees may damage the unit and void your warranty.   Power Inputs: Grid electricity Secondary Source Boiler Primary Source Solar Panels Heat Pump Some high temp   General Specifications Product Code DGP-CBW-AVZ-1 Energy capacity 3.2kWh Equivalent hot water capacity 71L Water available at 40°C 85L Weight in use 79kg Height 440mm Width 365mm Depth 575mm Storage core warranty 10 Years Other parts warranty 2 Years Technical Specifications Standing heat loss 20W Energy efficiency rating C Recommended flow rate 6LPM Minimum supply pressure 1.5 bar Maximum supply pressure 10 bar Connected load at 230v, 50hz 2,800W

Read more less

Details The powerful Sunsnyk 12kW 3ph Hybrid Inverter is a high quality, energy-efficient solution for your power management needs. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. This unique feature sets it apart from other inverters in its class. The Sunsnyk 12kW 3ph Hybrid Inverter also boasts excellent charging current capabilities, with a maximum charging and discharging current of 250A. It also features improved voltage stability through frequency droop control, allowing for reliable power management in a variety of settings. This inverter is also easily expandable, with the capability to connect up to 4 inverters in parallel. Its interactive display and WiFi compatibility with RS485 Wi-Fi interface make it easy to monitor and manage your power supply. With a 5 year warranty, the Sunsnyk 12kW 3ph Hybrid Inverter offers peace-of-mind and long-lasting, reliable performance. Features : Excellent charging current - Maximum charging/discharging current of 250A Improved voltage stability - Frequency droop control Expand your system - Up to 4 inverters in parallel Easy to monitor - Interactive display WiFi compatible - RS485 Wi-Fi interface Peace-of-mind - 5 year warranty

Read more less

Part No: SUN-3.6-ECCO Storage Systems - Hybrid Inverter The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68 resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as; Dual MPPT design  Compatible with Lithium-ion batteries and Lead Acid batteries Up to 50kWh battery pack 5yr warranty as standard IP65 rated Anti-islanding protection Fully programmable power export Automatic switching from Grid-Tied to Off-Grid mode Up to 16 units with the same firmware can be paralleled  Supplier Part No: SUNsynk-3.5K-SGO1LP1 ECCO Weight: 20.5 kg Rated Power: 3,600 W Min PPT Voltage: 125 V Max PPT Voltage: 500 V DC Startup Voltage: 150 V DC Shutdown Voltage: 125 V Max Input Voltage: 500 V Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W Surge AC Power (1 Second): 5,400 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 99.9 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Data Sheet 3.6 ECCO

Read more less