Smart Products Filter Index - Do not delete

Part No: MYEN-EDDI-RLYBD Accessories - Immersion Controllers eddi has the option to install a Relay & Sensor board which allows for many different wiring configurations and includes the following features:   Two independent multi-function relays (16Amp) eSense input (isolated 230V detection for low tariff etc.) Two temperature sensor inputs (PT1000)   The two relays can be independently set for several different functions, or they can be set to operate as a pair. The relay functions include:   – Export Threshold – Import Threshold – Operate when heating – De-stratification pump control – Timed operation – Fault signal for BMS systems   Please refer to the eddi manual for fitting diagrams.   Supplier Part No:MYEN-EDDI-RLYBD Weight:0.5 kg

Read more less

Part No: ENET-HBCL-01 Accessories - DC Battery Storage SolarEdge Energy Net for Home Wave SetApp inverter.  (can be used when the inverter is not using cellular or zigbee device) The new ENET comms plug in for SetApp inverters with SolarEdge Home Battery installations. Use this for retrofit installations when adding a Home battery to an existing Home Wave Set App inverter, or for new installs with a Home Wave SetApp inverter (HD Wave SetApp no display).   Supplier Part No:ENET-HBCL-01 Weight:0.3 kg

Read more less

Part No: IAC-RBAT-RWYCBL-01   Accessories - DC Battery Storage Branch connectors for parallel connection of multiple SolarEdge Energy Bank batteries. 1x pair - 1x male and 1x female   Supplier Part No:IAC-RBAT-RWYCBL-01 Weight:0.25 kg  

Read more less

Part No: BIRD-MESH-CLIPS Accessories - Bird Protection These clips work for the SolarSpikes (EG-SPIKE-GUARD-130) as well as the Bird Mesh (BIRD-MESH-BLK)   Supplier Part No:Mesh Clips Weight:0.002 kg

Read more less

Part No: EN-Q-TERM-3P Accessories - Cable termination caps Enphase round Q Cable 3 phase Terminator cap for unused cable ends - required to terminate each 3 phase circuit.  Single item only.    Supplier Part No:Q-TERM-3P Weight:0.28 kg

Read more less

Part No: EN-Q-TERM-R Accessories - Cable termination caps Enphase round Q Cable Terminator cap for unused cable ends - required to terminate each circuit.  Single item only.   Supplier Part No:EN-Q-TERM-R Weight:0.025 kg

Read more less

Part No: EG-SPIKE-GUARD-130 Accessories - Bird Protection   Adjustable – The total spike length before trimming is 130mm and can be adjusted easily with a set of wire cutters. Stainless steel spikes with a UV resistant polycarbonate base. Simple to install on panels that do not have the traditional lip on the underside edge. Ideal for installations on uneven roofs or profiled tin clad roofs. Bond to the panels with soudal high module soudal Crystal adhesive, located in adhesives.   Supplier Part No:EG-SPIKE-GUARD-130 Weight:0.5 kg

Read more less

Part No: EG-FASTEN-CLIP-35 Accessories - Bird Protection These brand new and revolutionary clips make applying solar panel proofing spikes quicker and easier than ever!  These clips simply clip on to the side of the solar panel frame and hold the spike system securely in place. Remove warranty conflicts as there is no drilling into the panel frame Available in 30mm & 35mm sizes to suit most solar panel frames. We recommend 6 clips for every 1M of spike purchased. These clips work for the SolarSpikes (EG-SPIKE-GUARD-130) as well as the Bird Mesh (BIRD-MESH-BLK)   Supplier Part No:EG-FASTEN-CLIP-35 Weight:0.1 kg

Read more less

Part No: EG-FASTEN-CLIP Accessories - Bird Protection These brand new and revolutionary clips make applying solar panel proofing spikes quicker and easier than ever!  These clips simply clip on to the side of the solar panel frame and hold the spike system securely in place. Remove warranty conflicts as there is no drilling into the panel frame Available in 30mm & 35mm sizes to suit most solar panel frames. We recommend 6 clips for every 1M of spike purchased. These clips work for the SolarSpikes (EG-SPIKE-GUARD-130) as well as the Bird Mesh (BIRD-MESH-BLK)   Supplier Part No:EG-FASTEN-CLIP-30 Weight:0.1 kg

Read more less

Part No: BOHAZARD-SET Labels - Hazard Labels This part is made up of the following items: 1 x BOHAZARD Hazard Label   1 x BOHAZ-ROOF PV on Roof Hazard Labels   This is a combination part containing both PV hazard labels BOHAZARD and BOHAZ-ROOF. Keywords: BOHAZARDSET, Portafix   Weight:0.021 kg

Read more less

Part No: BOHAZARD Labels - Hazard Labels BioHazard Label Complies To ISO7010 Biohazard symbol and text label.    Features:  Complies to ISO7010 Technical: Self-adhesive, thick and durable polyolefin material    Keywords: Portafix, Labels, Hazard Label, warning stickers   Supplier Part No:MG04392 Weight:0.02 kg

Read more less

Part No: BOHAZ-ROOF Labels - Hazard Labels Roof Hazard Label Fragile Roof Hazard  Fragile Roof Hazard Symbol Sign will help let anyone know that the roof is fragile and that they should stick to designated movement areas while working up there. This will aid their safety as well as those below.   Features:  Complies to ISO7010 Technical: Self-adhesive, thick and durable polyolefin material      Keywords: Portafix, Labels, Hazard Label, warning stickers   Supplier Part No:MG04393 Weight:0.001 kg

Read more less

Part No: HUA-SL-3000A Display - Dataloggers The Huawei Smart Logger 3000A is dedicated to monitoring and managing a PV power generating system. It converges all ports, converts protocols, collects and stores data, and centrally monitors and maintains. SMART IEC60870-5-104 for connections to third-party monitoring systems; USB and embedded web for data reading and software upgrade; Automatically detecting equipment and assigning RS485 addresses; Remote control of active & reactive power SIMPLE Up to 80 inverters feeding into one Smart Logger; Up to 30 devices per RS485 bus; Easy to install on walls, tabletops and rails mounting RELIABLE Max. reliable communication range of 1000m; Remote configuration, automatic set-up of RS485 addresses Now with built in SPD Compatible with older Huawei -V1 inverter range and newer -M0, -H1 inverter range. 3G/4G router built in - NOT IN UNITS OFFERED IN SOUTH AFRICA . Please refer to the documents tab for associated G100 certificates.   Supplier Part No:SMARTLOGGER-3000A Weight:3.3 kg

Read more less

Part No: SE1000-CCG-G-S1 Display - Plant Controllers Commercial Gateway SE1000-CCG-G-S1 All-in-one communication gateway: Wireless connections including optional WIFI, Zigbee and GSM plug-ins Environmental sensors support Power reduction interface Electricity meter reader Non-SolarEdge inverter data loggers Easy installation – DIN rail and wall mount   Supplier Part No:SE1000-CCG-G-S1 Weight:0.76 kg

Read more less

Part No: SE1000-CCG-F Display - Firefighter Controllers The firefighter gateway provides centralised safety management of SolarEdge systems. Firefighters can immediatly stop production of a SolarEdge PV system, either manually through an emergency stop button or automatically through a fire alarm control panel system. This reduces string voltage to a safe voltage using the unique SafeDC™ feature   Feature highlights: Manual and automatic system DC shutdown Real time indication of system DC voltage for safety assurance Emergency sttop button for the entire PV system Notification to SolarEdge monitoring platform on system shutdown Easy installation - DIN rail mount Additional RS485 Expansion card might be required if using together with Modbus meter. Please note in this case it would not possible to use Wi-Fi communication card.   SE1000-CCG-F-S1   Supplier Part No:SE1000-CCG-F-S1 Weight:0.72 kg

Read more less

Part No: SOL-EPM3-5G-PLUS Display - Power Management Solis EPM 5G Plus The control centre for smart energy management The Solis Export Power Manager is the ideal solution for smart energy management for both residential and commercial systems. The unit allows you to adjust export values to satisfy local network regulatory requirements. Energy management with the Solis Export Power Manager allows for higher self-consumption and efficient use of the locally generated PV power. Easy to Use Active power limitation and control at the grid-connection point Automatic, intelligent control of loads with up to 80x Solis inverters (only 10x Maximum to comply with UK G100!) Easy commissioning with the PV System Setup Assistant SolisCloud monitoring platform Flexible Several standardised meter interfaces Individual specifications for controllable appliances Only suitable for Solis inverters made after November 2019 Solis do not provide CT clamps with these devices and they must be sourced separately - the secondary current for the CT should be 5A - Recomended CT sizes: 300A/500A/1000A/1500A/2000A/3000A with 5A secondary current This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.   Please refer to the App note in Documents for setting up your EPM to your Wi-Fi network. Important Please note: if you are using this EPM with a Solis Series 5 (S5) inverter. An EPM firmware upgrade is required for the EPM and the S5 inverter to communicate. The S5 inverter may have a 16-digit serial number which causes the issue. If your inverter has only 15-digits, an upgrade is not necessary. If the EPM is online (on Wi-Fi), this update can be done remotely. Alternatively this update can be performed using the Solis Upgrade Stick or a smart phone provided you have the latest firmware saved locally. Supplier Part No:SOL-EPM3-5G-PLUS Weight:8.87 kg

Read more less

Part No: SOL-EPM3-5G Display - Power Management Solis EPM 5G   The control centre for smart energy management   The Solis Export Power Manager is the ideal solution for smart energy management for both residential and commercial systems. The unit allows you to adjust export values to satisfy local network regulatory requirements.   Energy management with the Solis export power manager allows for higher self-consumption and efficient use of the locally generated PV power.   the secondary current for the CTs is 5 amps, this makes it really easy and flexible to get CTs for the site SOLIS do not supply CTs with either the EPM5G or the EPM5G-PLUS it can control different models of inverters  the PLUS model comes with monitoring for consumption the normal version (EPM5G) doesn’t come with monitoring and therefore doesn’t work on showing consumption information at the moment   Only suitable for Solis inverters made after November 2019 Solis do not provide CT clamps with these devices and they must be sourced separately - the secondary current for the CT should be 5A    Supplier Part No:SOL-EPM3-5G Weight:2.1 kg

Read more less

   Part No: SE-WND-3Y-400-MB-K2-ENC Display - Energy Meter This part is made up of the following items: 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection   1 x JUN-BOX12 12-Entry Junction Box - Grey 175x150x80mm    Modbus Meter for SolarEdge Installations High accuracy meter readings for production/consumption monitoring Import/Export meter readings for export limitation functionality Small and easy to install - fits in standard electrical panel Supports residential, commercial and utility-size installations Please note actual product may look slightly different to image shown.   Weight:0.84 kg

Read more less

Part No: SE-JUP-DIG-FLD-04 Display - Communications A digital board replacement for SE-3PH inverters    JUP-DIG-FLD-04   Supplier Part No:JUP-DIG-FLD-04 Weight:0.187 kg

Read more less

Part No: SE-WND-3Y400-MB-K2 Display - Energy Meter Modbus Meter for SolarEdge Installations High accuracy meter readings for production/consumption monitoring Import/Export meter readings for export limitation functionality Small and easy to install - fits in standard electrical panel Supports residential, commercial and utility-size installations This is a new -K2 part with updated firmware to support CT disconnection required to meet UK G100 Feed In Limitation requirements.  Please note actual product may look slightly different to image shown.    Supplier Part No:SE-WND-3Y400-MB-K2 Weight:0.4 kg  

Read more less

Part No: TIGO-CLOUDCON-TAP Display - Web Interfaces Cloud Connect Advanced kit for intdoor use, including CloudConnectAdvanced, TAP and DIN rail power supply.   CLOUD CONNECT ADVANCED (CCA) COMPACT DATA LOGGER Collect data from up to 900 TS4 units Supports wired and wireless networks Control monitoring and safety features Configure and commission with Tigo SMART app Monitor 3rd party devices via Modbus Can communicate with up to 7 TAPs   TIGO ACCESS POINT (TAP) WIRELESS ACCESS POINT Collect data from up to 300 TS4 units Wireless mesh communication High definition sampling rate Scalable architecture Mounts easily on module frame without tools   Please Note - Registration with the Tigo Monitoring service must be completed in 90 days from the Warranty Start Date for Limited Warranty to be valid, for the following Equipment: TS4-M, -S, -O, -L, Tigo Access Point, and Cloud Connect Advanced when implemented with communication. Supplier Part No:344-00000-52 Weight:0.41 kg

Read more less

Part No: GIV-LORA Display - Energy Meter LoRa data transmission terminals universal communication interface equipment. Allows for wireless transmission of RS485 data, cutting out the need for running long cables in complex installs.  The system integrates two industrial standard RS485 interfaces and supports a variety of protocols to realise reliable data transmission between wired and wireless devices. Includes a pair of communicators (transmitter and receiver).   Set as Channel 0  Key features: Small, easy to install Long-range, up to 8km barrier free Operating temperature range: -20 to 70 oC  Please note: This device is not suitable for systems being installed under G100    Supplier Part No:GIV-LORA Weight:1 kg

Read more less

Part No: GIV-OBM-LORA-223 Display - Energy Meter LoRa data transmission terminals universal communication interface equipment. Allows for wireless transmission of RS485 data, cutting out the need for running long cables in complex installs.  The system integrates two industrial standard RS485 interfaces and supports a variety of protocols to realise reliable data transmission between wired and wireless devices. Includes a pair of communicators (transmitter and receiver). Set as Channel 0  Key features: Small, easy to install Long-range, up to 8km barrier free Operating temperature range: -20 to 70 oC  Please note: This device is not suitable for systems being installed under G100    Supplier Part No:GIV-LORA-LCD Weight:0.26 kg

Read more less

Part No: DTSU666-H-3PH-250A Display - Energy Meter Huawei Smart Power Sensor 3 phase DTSU666-H with 3x 250A CTs    Smart Energy Meter can be used for export limitation using Huawei inverters. See G100 document for details.   Please note current clamps should be sized according to incoming grid supply in the property (not size of the PV array), please check if these 250A CTs are sufficient before buying.     Huawei Part Code: 20022249-001     Supplier Part No:020022249-001 Weight:1.5 kg

Read more less

Part No: SE-LTE-B-R0-GLO-V-S0 Display - Remote GSM Monitoring Cellular Plug-IN CELL-B-R0-GLO-V-S0 Cellular Interent Connectivity for Commercial and Residential Installations Compatible with SetApp-enabled inverters Connects SolarEdge inverters wirelessly to the internet No need for internet infrastructure at site Installed within the inverter enclosure for outdoor resilience, or in the communication gateway Supports high bandwidth monitoring of inverters, optimizers, batteries, meters and weather stations Enables remote analysis and troubleshooting   Supplier Part No:CELL-B-R0-GLO-V-S0 Weight:0.007 kg

Read more less

Part No: SOL-METER-3PH-CT3 Display - Power Management Three phase meter with external CTs for Export Limitation with Solis 3-phase inverters. This Solis meter is an exceptional device that allows the calculation of electricity consumption on selected inverter models, you will be able to manage the electric demand perfectly for export limitation and adherence to grid regulations. Product features Temperature measurement Remote communication and Control Measurement of various electrical parameters NB. This meter should be used with single inverter deployments only. Compatibility Full 24hr net power and consumption monitoring with export limitation: Solis 4G 3-Phase 5kW to 20kW Inverters Solis S5 3-Phase 5kW to 60kW Inverters (Series 5) Only PV production monitoring and export limitation: Solis 5G 3-Phase 25kW to 40kW Inverters Solis 4G 3-Phase 50kW and 60kW Inverters Solis 5G 3-Phase 80kW and 110kW Inverters Accessories For monitoring with Solis Cloud a Solis LAN or Wi-Fi data logging stick is required. SOL-DLS-LAN - Data Logging Stick - wired LAN SOL-DLS-W - Data Logging Stick - WiFi   Comes supplied with 3x 150A:5A CTs.  When deploying with 110kW Inverter, CT upgrades are required - 200A:5A   This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.    Supplier Part No:SOL-METER-3PH-CT3 Weight:1.68 kg

Read more less

Part No: SE-CT-SPL-1000A-A Display - Current Sensor Clamps This split-core current transformer offers outstanding accuracy and one-handed operation and is only for use in Indoor environments. The Sensor supports the following measurements: AC Current Amps (A). Note: This sensor is only for use with the SolarEdge Electricity Meter 1PH/3PH 230/400V SolarEdge Modbus Meter 1 second     Supplier Part No:SECT-SPL-1000A-A Weight:0.688 kg

Read more less

Part No: FE-AIO-EM Display - Energy Meter Eastron SDM230-Modbus for Fox ESS Storage inverters.  1ph direct connected 100A   Supplier Part No:FE-AIO-EM Weight:0.22 kg

Read more less

Part No: SOL-METER-1PH-CT1 Display - Power Management ACR10R16DTE Single phase meter for Export Limitation with Solis 1phase inverters. Comes with 120A CT. Meter allows for full 24hour Consumption Monitoring.   For SA Only: For installations with the compatible single phase inverters, the inverter has to be modified in order for the meter to work. Please contact your Technical advisor.    This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a  result of incorrectly installed systems.   Important For SA Only: For installations with the compatible single phase inverters, the inverter has to be modified in order for the meter to work. Please contact your Technical advisor. Supplier Part No:SOL-METER-1PH-CT1 Weight:0.62 kg

Read more less

Part No: DDSU666-H-1PH-100A Display - Energy Meter Huawei Smart Power Sensor DDSU666-H With 1x 100A  Current Transformer Measurement accuracy ＞class 1 within full temperature range Simple & Easy LCD display, convenient for users, easy to set and check Visual color identification for simple wiring Energy Efficient Overall power consumption ≤ 1 W Standard din-rail mounting of DIN 35mm   Supplier Part No:DDSU666-H Weight:1.5 kg

Read more less

Part No: FE-GSM-STICK Display - Web Interfaces The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also available via your smartphone or web portal.   Supplier Part No:4G/GPRS Dongle Weight:0.14 kg

Read more less

Part No: SE1000-RS485-IF01 Display - Communications Expanding Wired Connectivity Provides an additional RS485 port for enhanced communications Located within the inverter enclosure for outdoor protection. Suitable for installation in the SolarEdge Control and Communication Gateway. Reduces labor cost with simple and quick installation Allows daisy chain configuration of multiple RS485 buses for communications in commercial installations.   Not suitable for SetAPP inverters (without screen)!   SPECIAL ORDER ONLY - 12 WEEKS LEAD TIME   Supplier Part No:SE1000-RS485-IF Weight:0.035 kg

Read more less

Part No: SE-1000-WIFI01 Display - Web Interfaces The WiFi Communication Solution enables wireless communication between a SolarEdge inverter and a WiFi router. The Wi-Fi solution is installed in the inverter, saving the time and cost associated with installing an Ethernet connection. Feature Highlights: Extended communication range with external antenna Wi-Fi module installed within the inverter enclosure for outdoor resilience Robust communications with support of 802.11b/g/n standards Please note this WIFI Module Kit will not work with Solar Edge SetAPP inverters that do not have a display. This also includes the external antenna provided with this part – it will NOT suite new SetAPP type of inverters.   For inverters with screen ONLY.   Supplier Part No:SE1000-WIFI01 Weight:0.34 kg

Read more less

Part No: SOL-S2-WL-ST Display - Web Interfaces The Solis 2-in-1 datalogger is suitable for areas covered by Wi-Fi or LAN signals, data collection is faster, wider, and more reliable by uploading directly through to Solis Cloud. Supports Wi-Fi or LAN communication Plug and play - convenient and fast Fault alarm, real-time monitoring LED Status indicators for Power, Network, and Inverter Communication Reset button - one key to send data for convenient debugging 4-pin connector for COM port on all Solis inverters 2-year standard Solis accessory warranty.   Supplier Part No:SOL-S2-WL-ST Weight:0.16 kg

Read more less

Part No: HUA-SMART-WLAN-FE Display - Web Interfaces Huawei Smart Dongle  - Wi-Fi and Ethernet SDongleA-05 (HUA-SMART-WLAN-FE) is a smart communications expansion module that works with  Huawei inverters: (SUN2000-2/3/3.68/4/4.6/5/6-L1 SUN2000-3/4/5/6/8/10-M1 SUN2000-12/15/17/20KTL-M2 SUN2000-12/15/17/20/25KTL-M5 SUN2000-30/36/40/50KTL-M3 SUN2000-100/115KTL-M2 SUN2000-110KTL-INM2) to implement communication between inverters and the management system using WLAN (Wireless) or FE (Fast Ethernet). A Smart Dongle can be used for daisy chaining devices using RS485 communication (inverter daisy chained, or inverters connected with other devices). A maximum of 10 devices can be connected together. When multiple inverters are connected together, only one Smart Dongle or one SmartLogger is allowed.   Supplier Part No:02312QMV Weight:0.9 kg

Read more less

Part No: SE-WFGW-B-S1-RW Display - Communications The SolarEdge Gateway connects SetApp-enabled SolarEdge inverters to an internet router. This gateway is easy to install and configure using the SolarEdge app - SetApp. The antenna is locatated externally to the inverter and can support up to two repeaters for extended range. This wireless gateway supports up to 8 SolarEdge inverters on a single wireless network.   Supplier Part No:SE-WFGW-B-S1-UK Weight:0.12 kg

Read more less

Part No: SOL-DLB-W Display - Web Interfaces Datalogger Box Wifi For connecting multiple Solis inverters to Solis Cloud. Connect up to 10 inverters - Daisy Chain using RS485 Cables (Not Included) For Connecting up to only 3 Inverters - use SOL-DLB-LOOM3-2M Bare cable and correct plugs can be requested from Solis, but please note the installer will have to make them up themselves (solder the plug on to one of the cables and modify the other one).    Supplier Part No:SOLIS-DLB-WIFI Weight:0.41 kg

Read more less

Part No: SOL-RF-LINK Display - Energy Meter Used for RF Communication between the inverter and router.  Compatible with all Solis Inverters.  This is a Solis data logging device consisting of two components: RF Kit  (data logger – connected to router) and the RF stick/antenna (connected to inverter)   This is an alternative way of connecting a Solis inverter to the internet, other than standard Solis WIFi or Lan stick. To be used specifically for residential installations.  Connection is still wireless but over a different RF frequency, main benefit of this connection is if a customer changes their Wi-Fi router they do not have to set up connection to the Solis inverter again. They just unplug the RF Kit from the old router, plug it in to the new router and it all works automatically, no set up required.    Supplier Part No:SOL-RF-LINK Weight:0.21 kg

Read more less

Part No: SE-CT-SPL-250A-A Display - Current Sensor Clamps This split-core current transformer offers outstanding accuracy and one-handed operation and is only for use in Indoor environments. The Sensor supports the following measurements: AC Current Amps (A). Note: This sensor is only for use with the SolarEdge Electricity Meter 1PH/3PH 230/400V SolarEdge Modbus Meter 1 second. SolarEdge have improved the design of their 100A and 250A Split-Core CTs to reduce the size and improve installation experience.   Supplier Part No:SECT-SPL-250A-A Weight:0.24 kg

Read more less

Part No: FE-LAN-STICK Display - Web Interfaces The FoxESS Lan stick is used in place of the Wi-Fi dongle if a wired connection from inverter to the internet is required. The FoxESS LAN stick is compatible with the following FoxESS inverters: FoxESS KH 10kW FoxESS AIO 6kW   Supplier Part No:LAN Dongle Weight:0.15 kg

Read more less

Part No: SOLAX-CTSA016 Display - Current Sensor Clamps CTSA016 CT Clamp for X1-AC-3.6   Supplier Part No:CTSA016 100A Weight:0.3 kg

Read more less

Part No: GIV-EM115CT-ID3 Display - Energy Meter GivEnergy EM115 Single Phase Modbus Energy Meter for direct metering up to 100A (ID3) Product Features This meter has been set as ID3 where 3 meters is being used in a system With bi-directional energy measurement This meter is ideal for Solar PV energy metering Direct/CT connection and solid or split CT options LCD display with clear green backlight 50 Pulse output 1,2,3 and 4 tariff meter option Accuracy class B according to EN50470-3 Accuracy class 1 according to IEC62053-21 EEprom memory backup Import / Export / Generation and Consumption NET Metering to comply with OFGEM regulations on Co-located Storage   Supplier Part No:GIV-EM115CT-ID3 Weight:0.9 kg

Read more less

Part No: GIV-EM115CT-ID2 Display - Energy Meter GivEnergy EM115 Single Phase Modbus Energy Meter for direct metering up to 100A (ID2) Product Features This meter has been set as ID2 where 2 meters is being used in a system With bi-directional energy measurement This meter is ideal for Solar PV energy metering Direct/CT connection and solid or split CT options LCD display with clear green backlight 50 Pulse output 1,2,3 and 4 tariff meter option Accuracy class B according to EN50470-3 Accuracy class 1 according to IEC62053-21 EEprom memory backup Import / Export / Generation and Consumption NET Metering to comply with OFGEM regulations on Co-located Storage   Supplier Part No:GIV-EM115CT-ID2 Weight:0.9 kg

Read more less

Part No: SOL-5-IN-1-RS485 Display - Web Interfaces A 5-way communication cable for use with the WiFi BOX with up to 9 inverters.   Supplier Part No:SOL-5-IN-1-RS485 Weight:0.94 kg

Read more less

Part No: SE-CT-SPL-100A-A Display - Current Sensor Clamps This split-core current transformer offers outstanding accuracy and one-handed operation and is only for use in Indoor environments. The Sensor supports the following measurements: AC Current Amps (A). Note: This sensor is only for use with the SolarEdge Electricity Meter 1PH/3PH 230/400V SolarEdge Modbus Meter 1 second SolarEdge have improved the design of their 100A and 250A Split-Core CTs to reduce the size and improve installation experience. The new 100A CT SECT-SPL-100A-A is a 1:1 replacement for the previous 50A and 70A CTs. Thus, one CT will cover the full range from 50A to 100A installations, instead of 3 different CT products required until now.   Supplier Part No:SECT-SPL-100A-A Weight:0.24 kg

Read more less

Part No: GIV-WIFI-DONGLE Display - Web Interfaces GivEnergy Wi-Fi dongle for real time monitoring when used with the APP Product Features Flexible monitoring through IOS and Android IP65 Easy configuration and install Monitoring points every 5 minutes USB port type with Micro SIM Card   Supplier Part No:GIV-WIFI Weight:0.13 kg

Read more less

Part No: TIGO-TAP Display - Plant Communications The TAP (Tigo Access Point) is Tigo's latest wireless antenna. Is the improved model, it replaces the Tigo Gateway and has the same function.  Like the Gateway, the TAP allows wireless communication between the Cloud Connect Advanced (CCA) and the TS4 optimizers (wireless communication between TS4 Optimisers and TAP and wired RS485 connection between TAP and CCA). Tigo TAP utilises ‘mesh’ technology which allows each Tigo TS4 optimiser to act as a repeater, extending the range of TAP.  The signal and data can hop from TS4 to TS4 along many different paths. As long as the TS4 optimisers are not more than 10m from each other, the TAP total range including ‘hops’ is 35m.     For details on differences between Gateway and TAP please follow the link to Tigo website HERE.   Please Note - Registration with the Tigo Monitoring service must be completed in 90 days from the Warranty Start Date for Limited Warranty to be valid, for the following Equipment: TS4-M, -S, -O, -L, Tigo Access Point, and Cloud Connect Advanced when implemented with communication   Supplier Part No:158-00000-02 Weight:0.23 kg

Read more less

Part No: SOL-S3-GPRS-ST Display - Web Interfaces Plug and play, quick installation Fault alarm, real-time monitoring Plug and play, convenient and fast Status indicator, easy to display working status RESET button, one key to send data, convenient debugging D Please note we are awaiting some additional documentation for this item which will be uploaded imminently.     Please note this is hardware only, SIM card and data package NOT included and will have to be sourced separately.   Supplier Part No:SOL-S3-GPRS-ST Weight:0.084 kg

Read more less