Solis EPM 5G Plus
The control centre for smart energy management
The Solis Export Power Manager is the ideal solution for smart energy management for both residential and commercial systems. The unit allows you to adjust export values to satisfy local network regulatory requirements.
Energy management with the Solis Export Power Manager allows for higher self-consumption and efficient use of the locally generated PV power.
Easy to Use
- Active power limitation and control at the grid-connection point
- Automatic, intelligent control of loads with up to 80x Solis inverters (only 10x Maximum to comply with UK G100!)
- Easy commissioning with the PV System Setup Assistant
- SolisCloud monitoring platform
Flexible
- Several standardised meter interfaces
- Individual specifications for controllable appliances
Only suitable for Solis inverters made after November 2019
Solis do not provide CT clamps with these devices and they must be sourced separately - the secondary current for the CT should be 5A
- Recomended CT sizes: 300A/500A/1000A/1500A/2000A/3000A with 5A secondary current
This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.
Please refer to the App note in Documents for setting up your EPM to your Wi-Fi network.
Important
Please note: if you are using this EPM with a Solis Series 5 (S5) inverter. An EPM firmware upgrade is required for the EPM and the S5 inverter to communicate. The S5 inverter may have a 16-digit serial number which causes the issue. If your inverter has only 15-digits, an upgrade is not necessary. If the EPM is online (on Wi-Fi), this update can be done remotely. Alternatively this update can be performed using the Solis Upgrade Stick or a smart phone provided you have the latest firmware saved locally.
Supplier Part No:SOL-EPM3-5G-PLUS
Weight:8.87 kg
