Solar Fitting & Mounting Kits

Part No: REN-520075-K Mounting - Flat Roof Trays The ConSole+ provides an angle of 15 degrees. The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+. The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual. Details: Colour: black Suitable for flat-roof- and ground mounting installations For framed PV-modules Technical Data: Material: HDPE, Aluminium and stainless steel Weight: 7,900 kg Max# module length: 1550-2400 mm Holes gap - width: 895-1014 mm Holes gap - length: 690-1180 mm Other Contents: 1 x 500075 ConSole+ 2 x 400005 ConSole U-Profile 1035 mm 4 x 900027 Hexag# screw DIN933-M6x20 A2-70 4 x 900028 Washer DIN9021-6,4-A2 4 x 900029 Self-locking hexag# nut DIN985-M6-A2 4 x 900106 ConSole Clip 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8  Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Supplier Part No: 520075-K Weight: 8 kg Length: 1.71 m

Read more less

Part No: REN-400529 Mounting - Mounting Rails VarioSole+ Mounting rail 50 x 37 x 4400mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400529 Weight: 3 kg Length: 4.4 m

Read more less

Part No: ESD-1007202 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007202 Weight: 3.207 kg Length: 1.72 m

Read more less

Part No: SSP-SLATE-PLATE-Z-500-250 Mounting - Roof Anchor- Tile & Slates Quick and simple solar installations on slate roofs. No cutting, no sealants and no leaks. Available in 13 different sizes with an option of either an L or Z shaped roof hook for various mounting rail types.   Supplier Part No: Slate Plate Z shaped Weight: 1 kg

Read more less

Part No: BALLAST-17KG Mounting - Flat Roof Solid Dense 7.3N Concrete Block Grey 100mm Robust and durable, measuring 440x215mm with a thickness of 100mm the Enviroblock® is manufactured from secondary and recycled materials and comes in a natural grey finish.   Weight approx. 17 kgs Height 215 mm Length 440 mm Width 100 mm Colour Grey To be used with all ballasted mounting solutions.   Supplier Part No: BALLAST-17KG Weight: 17 kg

Read more less

Part No: SLT-101002-020 Mounting - Roof Anchor- Tile & Slates ProLine range Schletter Rapid 2+ Roof hooks   Roof Hook Rapid2+ 35 mm height In stainless steel quality Welded Symmetric bar arrangement Pre-assembled Wood screws must be ordered separately!   Supplier Part No: 101002-020 Weight: 0.46 kg PV Light: R2+

Read more less

Part No: SLT-119001-000 Mounting - Roof Anchor- Hanger Bolts Hanger bolt KlickTop extension part for hanger bolt For M10 / M12 hanger bolts, loose, aluminium.   Supplier Part No: 119001-000 Weight: 0.12 kg Length: 0.09 m PV Light: R2+

Read more less

Part No: ESD-1007209 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007209 Weight: 2.835 kg Length: 1.82 m

Read more less

Part No: REN-500407 Mounting - Flat Roof Base rail for the FS10-EW, 2060mm.   Supplier Part No: 500407 Weight: 1.4 kg Length: 2.06 m

Read more less

Part No: ESD-1003016 Mounting - Flat Roof Quick and easy to install Unique click design Only one tool needed Also available in black Meets all international safety requirements   Supplier Part No: 1003016 Weight: 0.01 kg

Read more less

Part No: SLT-110012-200 Mounting - Roof Anchor- Hanger Bolts For corrugated sheets (such as those of fiber cement) or trapezoidal sheet roofs, corrugated roof fastening sets consisting of a special hanger bolt with EPDM seal and a mounting plate are used. Hanger bolt with valcanized EPDM-sealing (UV resistant) and 3 flange nuts in V4A quality Additional mounting rail attachment required.   Supplier Part No: 110012-200 Weight: 0.193 kg PV Light: SLT1

Read more less

Part No: REN-400288 Mounting - Roof Anchor- Seam Clamps S-5-GXM 10 Mini insert - specifically for use with the S-5-K Grip Mini clamp. Insert options: LYSAGHT KLIP-LOK® 406 McElroy Metal Mirage AEP Span Klip-Rib® Metal Sales Clip-Loc SpeedDeck® SpeedDeck® Safintra Saflok 410 Safintra Saflok 700 Domico Dach® And other similar profiles   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400288 Weight: 0.02 kg

Read more less

Part No: REN-K-GRIP-M-10 Mounting - Roof Anchor- Seam Clamps This part is made up of the following items: 1 x REN-420284 Renusol Seam Clamp K-Grip Mini (Without Screws)   1 x REN-400288 Seam clamp GXM 10 Mini Insert ( for K-Grip Mini ) (BTO UK)   Designer note: The Renusol seam clamps are part of the S5 range. You can see more details on manufacturers website HERE    The S-5-K Grip clamp was specifically developed to fit Klip-Rib® and other bulb snap-together seams. The design utilizes multiple inserts (sold separately) in order to accommodate a variety of bulb snap-together profiles. Each insert has a unique shape that allows for a tight fit and provides increased holding strength over other attachment options. The S-5-K Grip Mini is a bit shorter than the S-5-K Grip and has one base bolt rather than two. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment—just about anything!   This is a complete Seam clamp with GX 10 Mini inserts.   UK only: The clamps should meet or exceed the requirements for MCS012 wind uplift values, but since they are not officially MCS012 tested and certified, they should not be used on <50kWp installations.    Weight: 0.13 kg

Read more less

Part No: ESD-1007220 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007220 Weight: 1 kg Length: 1.82 m

Read more less

Part No: SSP-ERIC-TILE-C Mounting - Roof Anchor- Tile & Slates ERIC-TILE plain tile roof hook allows for simple solar panel installations on plain/rosemary tiled roofs. No cutting, no sealants and no leaks. Helps prevent tile breakages whilst allowing installers to stand on the mounting rail.   Manufactured using high quality materials, with the polypropylene plate’s working temperature of – 40c to 120c. A choice of either an, “L” or “C” roof hook, and fixings to secure are included with the ERIC-TILE.   Compatible with Schletter and Clenergy.   Supplier Part No: Eric tile C shaped Weight: 1 kg

Read more less

Part No: SSP-ERIC-TILE-C-SLT Mounting - Roof Anchor- Tile & Slates This part is a special offer made up of the following items: Part   1 x SSP-ERIC-TILE-C Eric Tile C roof hook (Compatible with Schletter and Clenergy)   1 x SLT-943410-025 M10x25 Square head screw   1 x SLT-943912-010 Serrated M10 flange nut   ERIC-TILE plain tile roof hook allows for simple solar panel installations on plain/rosemary tiled roofs. No cutting, no sealants, and no leaks. Helps prevent tile breakages whilst allowing installers to stand on the mounting rail. Manufactured using high-quality materials, with the polypropylene plate’s working temperature of – 40c to 120c. A choice of either an, “L” or “C” roof hook, and fixings to secure are included with the ERIC-TILE. 10 year product guarantee Compatible with Schletter.   Weight: 1.03 kg

Read more less

Part No: ESD-1007201 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007201 Weight: 2.66 kg Length: 1.72 m

Read more less

Part No: ESD-1008132 Mounting - Mounting Rails ClickFit EVO mounting rail 2338mm is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1008132 Weight: 1.323 kg Length: 2.34 m

Read more less

Part No: ESD-1007011 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007011 Weight: 0.044 kg

Read more less

Part No: EASY-A002V41N Mounting - In Roof EASY ROOF EVOLUTION Universal MCS012 certified in roof mounting solution. An unique overlapping and Interlocking mounting systems with no seal, no cut, EASY ROOF EVOLUTION fits just like tiles. EASY ROOF EVOLUTION is ideal for all kinds of roofs and tiles: residential, commercial, public building, agricultural and industrial roofs. Fits majority of PV panels currently available on the market!   Standard Black Module Middle Clamp.   Supplier Part No: A002V41N Weight: 0.026 kg

Read more less

Part No: EASY-A002V41N-SET Mounting - Module Clips This part is made up of the following items: 1 x EASY-A004V40 Middle Bracket EVOLUTION Silver   1 x EASY-A002V41N Middle Clamp EVOLUTION Standard Black   4 x EASY-V003V02 Bracket Screw 6 x 40   1 x EASY-V012V02 Module Clamp Screw M6 X 30 (for Module Frames 30 - 40mm)   This is a full set consisting of Bracket and Clamp and Bracket screws and Clamp screw.    Weight: 0.388 kg

Read more less

Part No: REN-420401 Mounting - Roof Anchor - Corrugated Corrugated adaptor for Renusol MetaSole. This part allows MetaSole designs to be compatble with corrugated metal roof areas and enables your system to be attached to the roof with self-tapping screws, rather than drilling through the sheet into the substructure with hanger bolts. The added bonus is that no mounting rail is required, which reduces the cost of the mounting dramaticdally. Simple, secure and supremely affordable.  It must be used in conjunction with the MetaSole sheets REN-420402.    Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420401 Weight: 0.03 kg

Read more less

Part No: REN-400351 Mounting - Washers 5-mm spacer plate   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400351 Weight: 0.02 kg

Read more less

Part No: ESD-1008062 Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008062 Weight: 0.018 kg

Read more less

Part No: EASY-A001V40N Mounting - In Roof EASY ROOF EVOLUTION Universal MCS012 certified in roof mounting solution. An unique overlapping and Interlocking mounting systems with no seal, no cut, EASY ROOF EVOLUTION fits just like tiles. EASY ROOF EVOLUTION is ideal for all kinds of roofs and tiles: residential, commercial, public building, agricultural and industrial roofs. Fits majority of PV panels currently available on the market!   Black Module End Clamp.   Supplier Part No: A001V40N Weight: 0.035 kg

Read more less

Part No: REN-420184 Mounting - Roof Anchor- Tile & Slates Renusol have created roof hooks specifically for the UK market. This New roof hook can be used with Slate tiles, where higher snow loads capacity is required, and is compatible with the VarioSole product range. This brand-new version of the roof hook is both thicker and manufactured using stronger steel, offering a higher load capacity for areas with more snow.  This is the UK Plain Tile HL (please note ‘HL’ stands for ‘high load’). The primary benefit of this new hook is the sizeable gain in the load capacity compared to the existing UK plain roof hook: 130% increase for suction loads (wind), 112% increase for pressure loads (self-weight and snow) and 53% more capacity for combined loads.         Supplier Part No: 420184 Weight: 0.6 kg

Read more less

Part No: ESD-1007227-B Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007227-B Weight: 1.164 kg

Read more less

Part No: SLT-131101-003 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing   The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131101-003 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver

Read more less

Part No: ESD-1007224 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007224 Weight: 1.05 kg

Read more less

Part No: ESD-1007210 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007210 Weight: 3.5 kg Length: 1.82 m

Read more less

Part No: REN-400524-B Mounting - Mounting Rails Technical Data Material Dimensions Weight Compatible Black Anodised Aluminium 41 x 35 x 3300 mm 1#9 kg 420081, 420081-B, 420082, 420082-B   Renusol Black Mounting Rail, to be used with the VarioSole product range.   Supplier Part No: 400524-B Weight: 2 kg Length: 3.3 m

Read more less

Part No: ESD-1007121 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007121 Weight: 0.116 kg

Read more less

Part No: REN-900025 Mounting - Fixings Details: Haxagon head Flange head with serration Technical Data: Material: stainless steel 1.4301 Weight: 0,027kg     Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 900025 Weight: 0.02 kg

Read more less

Part No: EASY-P001LV42N01 Mounting - In Roof EASY ROOF EVOLUTION Universal MCS012 certified in roof mounting solution. An unique overlapping and Interlocking mounting systems with no seal, no cut, EASY ROOF EVOLUTION fits just like tiles. EASY ROOF EVOLUTION is ideal for all kinds of roofs and tiles: residential, commercial, public building, agricultural and industrial roofs. Fits majority of PV panels currently available on the market!   Module Frame L-1 Portrait for Module sizes 1638-1705mm x 982-1001mm x 30-50mm  Please use the Easy Roof Evolution configuration tool whilst we are working behind the scenes to integrate into our Design Tool.  This can be found in ‘Documents’. EasyRoof installation video; https://www.youtube.com/watch?v=uVK5FOcKY2U   Supplier Part No: P001LV42N01 Weight: 4.2 kg Length: 1.96 m

Read more less

Part No: REN-520502 Mounting - Flat Roof Eco Ballast Set FS 2100mm Size 2100x50x40 The ballast trays REN-520501 can be optionally added to your design to accommodate a higher amount of ballast, should your particular site need it.    Note: the design tool will not calculate the required ballast weight. Renusol can provide a detailed wind loading report that shows the amount of ballast that is required per module. Please provide them with the installation and site details at: tsuk@renusol.com  Each SET Composed of: 2x 500529 Eco Ballast Rail 2100mm (size 2100x40x40) 2x 900074  Stainless Steel Cable ties 2x 900229 Self Drilling Screw 4.8x19 A2 2x 500413 Roof Protection pad 500x40x11mm for ballast set (size 500x400x11)   Supplier Part No: 520502 Weight: 2.5 kg Length: 2.1 m

Read more less

Part No: ESD-1007219 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007219 Weight: 4 kg

Read more less

Part No: GSE-CLAMP-DOUBLE-H26-BLA Mounting - Module Clips   Supplier Part No: ART102335 Weight: 0.036 kg

Read more less

Part No: REN-900318-100 Mounting - Wood Screws Wood screw pan head 6mm x 80mm SIT30  Bag of 100 Material - Stainless steel Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Supplier Part No: 900318-100 Items in this pack: 100 Weight: 0.9 kg  

Read more less

Part No: SLT-129078-001 Mounting - FixGrid Interior rail connector for FlatGrid and FixGrid kit.   Supplier Part No: 129078-001 Weight: 0.8 kg

Read more less

Part No: EASY-A001V40N-SET Mounting - Module Clips This part is made up of the following items: 1 x EASY-A003V40N End Bracket EVOLUTION Black   1 x EASY-A001V40N End Clamp EVOLUTION Black   3 x EASY-V003V02 Bracket Screw 6 x 40   1 x EASY-V012V02 Module Clamp Screw M6 X 30 (for Module Frames 30 - 40mm)   This is a full set consisting of Bracket and Clamp and Bracket screws and Clamp screw.   Weight: 0.361 kg

Read more less

Part No: EASY-A003V40N Mounting - In Roof EASY ROOF EVOLUTION Universal MCS012 certified in roof mounting solution. An unique overlapping and Interlocking mounting systems with no seal, no cut, EASY ROOF EVOLUTION fits just like tiles. EASY ROOF EVOLUTION is ideal for all kinds of roofs and tiles: residential, commercial, public building, agricultural and industrial roofs. Fits majority of PV panels currently available on the market!   Black End Bracket.   Supplier Part No: A003V40N Weight: 0.3 kg    

Read more less

Part No: GSE-ROOFLEX-5M Mounting - In Roof   This flexible sealing strip can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper flashing conponents.  Easily malleable for various applications Pre bent to facilitate folding and alignment Ease of use thanks to its low weight Underside butyl with high adhesion Easily malleable for various applications.   Supplier Part No: ART100385 Weight: 2.01 kg  

Read more less

Part No: GSE-JUNCTION-BLA Mounting - In Roof   Supplier Part No: ART100039 Weight: 0.4 kg  

Read more less

Part No: GSE-SEAL Mounting - In Roof   The precompressed seal is used to ensure a complete waterproof perimeter around the PV array. The seal is pressed on to the flashing pieces at the border with the roof tiles.    Supplier Part No: ART101088 Weight: 0.45 kg  

Read more less

Part No: REN-500506 Mounting - Flat Roof Base Rail FS18-S 1739 mm   Supplier Part No: 500506 Weight: 1.21 kg

Read more less

Part No: ESD-1007225-B Mounting - Flat Roof FlatFix Fusion is a flexible click system that can be used to mount solar modules on flat roofs of every shape and size. And it’s suitable for both residential and commercial projects too. Complete modular system and aerodynamic design Single or dual-tilt (east-west) configuration Unique thermal break prevents damage to the roofing material For most modern solar modules (tilt angle 13 degrees) Easy to install around obstacles Meets all international safety requirements   Supplier Part No: 1007225-B Weight: 1.05 kg

Read more less

Part No: ESD-1007224-B Mounting - Flat Roof Complete modular system and aerodynamic design Single or dual-tilt (east-west) configuration Unique thermal break prevents damage to the roofing material For most modern solar modules (tilt angle 13 degrees) Easy to install around obstacles Meets all international safety requirements   Supplier Part No: 1007224-B Weight: 1.05 kg

Read more less

Part No: GSE-ROOFLEX-5M-0.5M Mounting - In Roof This flexible sealing strip can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper flashing conponents.  Easily malleable for various applications Pre bent to facilitate folding and alignment Ease of use thanks to its low weight Underside butyl with high adhesion Easily malleable for various applications.   Supplier Part No: ART101405 Weight: 2.01 kg  

Read more less