Solar Fitting & Mounting Kits

Part No: SLT-120005-440 Mounting - Mounting Rails MODULE SUPPORT PROFILES Module support profile Solo Light Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Height: 40mm Width: 40mm Length: 4400mm Wall thickness: 1.2mm   Supplier Part No: 120005-04400 Weight: 3.54 kg Length: 4.4 m PV Light: SLT1,R2+

Read more less

Part No: GSE-JOINT-EDPM Mounting - Washers Supplier Part No: ART105708 Weight: 0.04 kg  

Read more less

Part No: ESD-1007012 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007012 Weight: 0.072 kg

Read more less

Part No: GSE-CLAMP-SINGLE-H21-BLA Mounting - Module Clips   Supplier Part No: ART100495 Weight: 0.028 kg

Read more less

Part No: REN-420083 Mounting - Cruciforms The Renusol Cross-Rail Connector is used is pairs to attach perpendicular lengths of Renusol rail, or rail to TriSole frames.  A pair of Cross-Rail Connector are attached either side of the upper rail.  The upper rail should always be of 50mm x 37mm type because it has a small ridge along a third face to allow a connector to clamp on, whereas the 41 x 35 does not. Use any of the following rail partnos: (Silver) REN-500502, REN-500505 or (black) REN-400502-B, REN-400505-B.  Technical Data: Dimensions: 35x35x65 Weight: 0.066kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; MCS012 IK0197 Useable with: VS+ mounting rail 50x37; TS+ Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Supplier Part No: 420083 Weight: 0.07 kg  

Read more less

 Part No: REN-900036 Mounting - Fixings Keywords: REN900036, Renusol, PV Mounting, Fixings   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 900036 Weight: 0.005 kg

Read more less

Part No: ESD-1008069 Mounting - Metal Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008069 Weight: 0.006 kg

Read more less

Part No: REN-900314 Mounting - Flat Roof Socket bolt 6 x 110 mm for use with FS10 system   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 900314 Weight: 0.01 kg

Read more less

Part No: SLT-943610-025 Mounting - Fixings   Supplier Part No: 943610-025 Weight: 0.024 kg

Read more less

Part No: GSE-CLAMP-DOUBLE-H16-BLA Mounting - Module Clips   Supplier Part No: ART100482 Weight: 0.034 kg

Read more less

Part No: ESD-1006500 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1006500 Weight: 0 kg

Read more less

Part No: GSE-RIVET Mounting - In Roof GSE pop rivet, fixing for top centre flashing. Made up of two key parts; the rivet body and the setting mandrel. The pop rivet is inserted into a pre-drilled hole in the materials you're joining together.    Supplier Part No: ART100389 Weight: 0.002 kg

Read more less

Part No: ER-R-PRO-4600 Mounting - Mounting Rails The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.   Supplier Part No: ER-R-PRO4600 Weight: 3.4 kg Length: 4.6 m

Read more less

Part No: ER-R-PRO-4600 Mounting - Mounting Rails The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.   Supplier Part No: ER-R-PRO4600 Weight: 3.4 kg Length: 4.6 m

Read more less

Part No: ESD-1003022 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1003022 Weight: 0.018 kg

Read more less

Part No: SLT-101001-020 Mounting - Roof Anchor- Tile & Slates Schletter Rapid 2+ Roof hooks   Roof Hook Rapid2+ 45 mm height In stainless steel quality Welded Symmetric bar arrangement Pre-assembled Please note the Rapid 2+ rail attachment might be attached to the roof hook using two different types of screws – torx or hexagonal. Please bear that in mind when choosing correct tools on site. Both screws are equal in terms of quality and strength and exact type does not impact the installation of the roof hook or has an impact on any other aspect of the quality of the product. Wood screws must be ordered separately!   Supplier Part No: 101001-020 Weight: 0.95 kg PV Light: R2+

Read more less

Part No: SLT-113009-003-KIT Mounting - Roof Anchor- Trapezoidals This part is made up of the following items: 2 x SLT-113009-003 SingleFix Pro for corrugation heights from 22 mm (1 piece)   4 x SLT-943000-360 Screw 6.0 x25 self-tapping A2 with sealing washer   SINGLEFIX The universal trapezoidal sheet fastener for steel and aluminium sheet from 0.5 mm.     SingleFix Pro for corrugation heights from 22 mm (2 pieces).    Screws must be ordered separately as needed (2 pieces for each SingleFix Pro)   Used in connection with Solo mounting rails   This part No represents one of Singlefix plate SLT-113009-003 x 2 Correctly designed fixing requires 2x plates and 4x metal screws and needs to be attached to mounting rail.   Note : Screws needs to be purchased seperately SLT-943000-360 Weight: 0.09 kg PV Light: R2+

Read more less

Part No: REN-420080-B Mounting - Module Clips This innovative masterpiece makes your next PV-project a whole lot easier. The RS1 works as mid- and end clamp. It is heigth adjustable and secures any framed PV panel starting from 30 mm up to 50 mm height. Twisting the RS1‘s head changes the functionality from end- to mid-clamp. Installation and positioning works one handed. At the same time it minimizes needed storage space and saves administrational costs in item management. The RS1 is a real time saver and generates savings over your entire value chain. Technical Data: Dimensions: 35x36.5x60 Weight: 0.083kg Set: complete pre-assembled set Material: Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420080-BE Weight: 0.08 kg Clip Type: 199 Clip H: 60 mm Clip B1: 36.5 mm Clip Colour: Black

Read more less

Part No: ESD-1008065-B Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008065-B Weight: 0.014 kg

Read more less

Part No: GSE-CLAMP-DOUBLE-H21-BLA Mounting - Module Clips   Supplier Part No: ART100744 Weight: 0.034 kg  

Read more less

Part No: ESD-1003015 Mounting - Flat Roof Quick and easy to install Unique click design Only one tool needed Also available in black Meets all international safety requirements   Supplier Part No: 1003015 Weight: 0.008 kg

Read more less

Part No: SLT-163900-002 Mounting - FixGrid FixGrid FixZ-15 lower system rail 96mm with connector fixgrid   Supplier Part No: 163900-002 Weight: 0.129 kg

Read more less

Part No: SLT-131101-002 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing   The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131101-002 Weight: 0.055 kg Clip Type: 199 Clip H: 50 mm Clip B1: 10 mm Clip Colour: Silver

Read more less

Part No: GSE-CLAMP-SINGLE-H16-V2023-BLA Mounting - Module Clips Keywords: GSECLAMPSINGLEH16BLA, GSE, PV Mounting, Module Clip.   Supplier Part No: ART105897 Weight: 0.023 kg Clip Type: 199 Clip H: 46 mm Clip B1: 30 mm Clip Colour: Black

Read more less

Part No: REN-900245-B Mounting - Rail End Caps End cap for VarioSole + 41x35 rail, black Supplier Part No: 900245 Weight: 0.05 kg

Read more less

Part No: ESD-1004335 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1004335 Weight: 0.045 kg

Read more less

Part No: EASY-V003V02 Mounting - In Roof EASY ROOF EVOLUTION Universal MCS012 certified in roof mounting solution. An unique overlapping and Interlocking mounting systems with no seal, no cut, EASY ROOF EVOLUTION fits just like tiles. EASY ROOF EVOLUTION is ideal for all kinds of roofs and tiles: residential, commercial, public building, agricultural and industrial roofs. Fits majority of PV panels currently available on the market! Bracket Screw 6 x 40   Supplier Part No: V003V02 Weight: 0.006 kg  

Read more less

Part No: ESD-1000655 Mounting - Flat Roof   FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1000655 Weight: 0.014 kg

Read more less

Part No: ESD-1007031 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007031 Weight: 0.598 kg

Read more less

Part No: ESD-1008048 Mounting - Metal Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008048 Weight: 0.065 kg Length: 0 m

Read more less

Part No: GSE-FLASH-LAT-DPO-BLA Mounting - In Roof   This black lateral flashing comprises the sides of the PV array. A continuous line of flashings should be installed on each side of the array and a 15cm overlap distance should be observed between pieces of flashing.  Keywords: GSEFLASHLATBLA, GSE, PV Mounting, In Roof Note the new DPO GSE frames don’t work with the old lateral flashing but ALL GSE Frames work with the GSE-FLASH-LAT-DPO-BLA flashings.     Supplier Part No: ART104644 Weight: 0.57 kg Length: 1.29 m

Read more less

Part No: SLT-131101-001 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131101-001 Weight: 0.04 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver

Read more less

Part No: REN-400531 Mounting - Rail Connectors Technical Data: Dimensions: 195 x 24,1 x 30 Weight: 0.151kg Rail Length: 195,0mm Material: Aluminium Certification: TUV ID:48970; MCS012 IK0197/03 Useable with: VS+ Mounting rail 41 x 35mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400531 Weight: 0.15 kg

Read more less

Part No: REN-500420 Mounting - Flat Roof Eave support for use with FS10 S, FS18 S and FS10 EW systems.  fs10 fs18 Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 500420 Weight: 0.06 kg

Read more less

Part No: GSE-FRAME-DPO-1650-1135 Mounting - In Roof GSE module mounting plate for one portrait PV module with length 1610-1800mm and width 1130-1135mm.  1610mm is the recommended length. Please note; These frames are ordered in halves. 2 frames are required per module - this product is simply showing the upper or lower half of a single frame. Supplier Part No: ART105162 Weight: 3 kg

Read more less

Part No: REN-420405 Mounting - Roof Anchor- Trapezoidals For use on pitched roofs in landscape with the MetaSole and MS+ range.  Weight: 0.09 kg

Read more less

Part No: REN-420155 Mounting - Roof Anchor- Tile & Slates Technical Data Applicational Data Material Dimensions Weight Compatible Components Space for adjustment vertical: 24,5 mm Max. load: pressure 490 N, tension 490 N, shear 280 N Roof hook is pre-assembled Frictional connection due to serration Stainless steel 250 x 30 x 138 mm 0,510 kg 900013, 400081, 400011, 400094, 430009, 490018, 900138, 900163 1 x Roof hook for slate tiles 1 x Hammerhead bolt M8 x 25 1 x Hexagon Nut w. serration DIN6923 - M8 A2-70   Supplier Part No: 420155 Weight: 0.48 kg

Read more less

Part No: REN-420172 Mounting - Roof Anchor- Tile & Slates The strength of this hook reduces mounting costs on-site universal application allows for extensive configuration possibilities. adjustable base plate, positions the hook optimally between the rafters or tiles Supplier Part No: 420172 Weight: 0.49 kg

Read more less

Part No: ER-CAP-PRO-G Mounting - Rail End Caps Supplier Part No: ER-CAP-PROG Weight: 0.006 kg

Read more less

Part No: GEN-SLATE Mounting - Roof Flashings The SolarFlash™ system is a simple and effective waterproof solution to refitting roofing slates or tiles around a roof bracket when installing solar photovoltaic, or other, panels. By installing with SolarFlash™, it can help you to ensure that all your installations are MCS 012 compliant. SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims 3 x Hallhooks 1 x Hookpull 3 x Compensation hooks   Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005. For any specific clarification, please let us know.    Supplier Part No: SKI001 Weight: 0.34 kg

Read more less

Part No: SLATE-REN-GEN Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x GEN-SLATE Genius Roof - Slate Refit Kit   1 x REN-420181 Roof hook UK Plain tiles/slates (without wood screw)   Renusol plain roof anchor with Genius Roofing slate refit kit. This part contains:  - 1 x REN-420181 - 1 x GEN-SLATE   Weight: 1.06 kg  

Read more less

Part No: ESD-1008060-B Mounting - Pitched Roof The Clickfit Evo mounting rail end cap is made of high quality plastic composite and is therefore resistant to the long-term exposure to sunlight and other weather influences. The end cap ensures a beautiful and finished whole and a windproof closure of the mounting rail. The end cap, in combination with the universal module clamp, forms the end clamp. The end cap slides under the solar panel and removes the view of the mounting rail from the ground. When placing black solar panels, the use of black mounting rails is no longer necessary. The Clickfit Evo mounting rail end cap is available in the colours black and grey.   Supplier Part No: 1008060-B Weight: 0.031 kg

Read more less

Part No: ESD-1007194 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007194 Weight: 0.525 kg Length: 0.94 m

Read more less

Part No: SLT-109016-009 Mounting - Roof Anchor- Tile & Slates Plain tile kit Sheet metal replacement tile 170 x 380 for UK Plain Tile BEZ Rapid beaver tail AL 170 x 380   To used with SLT-109019-000 Roof hooks for Rapid beaver tail AL inst   Please note the Schletter Beaver Tail plain tile products are not currently MCS Certified pending the weather tightness testing.  Unfortunately, due to an oversite on part of MCS the three models were added in error to the MCS Database, however, this error was rectified, and the products were removed on the 15th December.  As per MCS “The outstanding testing is in progress and the product will surely be added once we completed the tests successfully” Supplier Part No: 109016-009 Weight: 0.337 kg

Read more less

Part No: SLT-109019-020-PLAIN Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x SLT-109019-020 Roof hook plain tile for Rapid Pro Alu   1 x SLT-109016-009 Sheet metal replacement tile 170 x 380 for UK Plain Tile   SLT-109016-009:  Plain tile kit Sheet metal replacement tile 170 x 380 for UK Plain Tile   SLT-109019-020: Sheet metal replacement tiles and roof hook sets for plain tile Rapid including installation set.   Weight: 0.657 kg PV Light: R2+

Read more less

Part No: SLT-129010-008 Mounting - Fixings For a simplified insertion of the M8 square nut at any desired spot of the M8 KlickIn groove. Supplier Part No: 129010-008 Weight: 0.001 kg  

Read more less

Part No: SLT-109019-024 Mounting - Roof Anchor- Tile & Slates Roof hooks for Slate Replacement Tile Rapid2+ Slate125 To be used with SLT-109017-010 Slate Replacement Tile Rapid2+ Slate125.   Supplier Part No: 109019-024 Weight: 0.37 kg  

Read more less

 Part No: REN-420080 Mounting - Module Clips This innovative masterpiece makes your next PV-project a whole lot easier. The RS1 works as mid- and end clamp. It is heigth adjustable and secures any framed PV panel starting from 30 mm up to 50 mm height. Twisting the RS1‘s head changes the functionality from end- to mid-clamp. Installation and positioning works one handed. At the same time it minimizes needed storage space and saves administrational costs in item management. The RS1 is a real time saver and generates savings over your entire value chain. Technical Data: Dimensions: 35x36.5x60 Weight: 0.083kg Set: complete pre-assembled set Material: Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420080 Weight: 0.083 kg Clip Type: 199 Clip H: 60 mm Clip B1: 36.5 mm Clip Colour: Silver

Read more less