Google Shopping inverters and batteries

Part No: SOL-EPM3-5G-PLUS Display - Power Management Solis EPM 5G Plus The control centre for smart energy management The Solis Export Power Manager is the ideal solution for smart energy management for both residential and commercial systems. The unit allows you to adjust export values to satisfy local network regulatory requirements. Energy management with the Solis Export Power Manager allows for higher self-consumption and efficient use of the locally generated PV power. Easy to Use Active power limitation and control at the grid-connection point Automatic, intelligent control of loads with up to 80x Solis inverters (only 10x Maximum to comply with UK G100!) Easy commissioning with the PV System Setup Assistant SolisCloud monitoring platform Flexible Several standardised meter interfaces Individual specifications for controllable appliances Only suitable for Solis inverters made after November 2019 Solis do not provide CT clamps with these devices and they must be sourced separately - the secondary current for the CT should be 5A - Recomended CT sizes: 300A/500A/1000A/1500A/2000A/3000A with 5A secondary current This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.   Please refer to the App note in Documents for setting up your EPM to your Wi-Fi network. Important Please note: if you are using this EPM with a Solis Series 5 (S5) inverter. An EPM firmware upgrade is required for the EPM and the S5 inverter to communicate. The S5 inverter may have a 16-digit serial number which causes the issue. If your inverter has only 15-digits, an upgrade is not necessary. If the EPM is online (on Wi-Fi), this update can be done remotely. Alternatively this update can be performed using the Solis Upgrade Stick or a smart phone provided you have the latest firmware saved locally. Supplier Part No:SOL-EPM3-5G-PLUS Weight:8.87 kg

Read more less

Part No: SOL-EPM3-5G Display - Power Management Solis EPM 5G   The control centre for smart energy management   The Solis Export Power Manager is the ideal solution for smart energy management for both residential and commercial systems. The unit allows you to adjust export values to satisfy local network regulatory requirements.   Energy management with the Solis export power manager allows for higher self-consumption and efficient use of the locally generated PV power.   the secondary current for the CTs is 5 amps, this makes it really easy and flexible to get CTs for the site SOLIS do not supply CTs with either the EPM5G or the EPM5G-PLUS it can control different models of inverters  the PLUS model comes with monitoring for consumption the normal version (EPM5G) doesn’t come with monitoring and therefore doesn’t work on showing consumption information at the moment   Only suitable for Solis inverters made after November 2019 Solis do not provide CT clamps with these devices and they must be sourced separately - the secondary current for the CT should be 5A    Supplier Part No:SOL-EPM3-5G Weight:2.1 kg

Read more less

   Part No: SE-WND-3Y-400-MB-K2-ENC Display - Energy Meter This part is made up of the following items: 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection   1 x JUN-BOX12 12-Entry Junction Box - Grey 175x150x80mm    Modbus Meter for SolarEdge Installations High accuracy meter readings for production/consumption monitoring Import/Export meter readings for export limitation functionality Small and easy to install - fits in standard electrical panel Supports residential, commercial and utility-size installations Please note actual product may look slightly different to image shown.   Weight:0.84 kg

Read more less

Part No: SE-JUP-DIG-FLD-04 Display - Communications A digital board replacement for SE-3PH inverters    JUP-DIG-FLD-04   Supplier Part No:JUP-DIG-FLD-04 Weight:0.187 kg

Read more less

Part No: SE-WND-3Y400-MB-K2 Display - Energy Meter Modbus Meter for SolarEdge Installations High accuracy meter readings for production/consumption monitoring Import/Export meter readings for export limitation functionality Small and easy to install - fits in standard electrical panel Supports residential, commercial and utility-size installations This is a new -K2 part with updated firmware to support CT disconnection required to meet UK G100 Feed In Limitation requirements.  Please note actual product may look slightly different to image shown.    Supplier Part No:SE-WND-3Y400-MB-K2 Weight:0.4 kg  

Read more less

Part No: TIGO-CLOUDCON-TAP Display - Web Interfaces Cloud Connect Advanced kit for intdoor use, including CloudConnectAdvanced, TAP and DIN rail power supply.   CLOUD CONNECT ADVANCED (CCA) COMPACT DATA LOGGER Collect data from up to 900 TS4 units Supports wired and wireless networks Control monitoring and safety features Configure and commission with Tigo SMART app Monitor 3rd party devices via Modbus Can communicate with up to 7 TAPs   TIGO ACCESS POINT (TAP) WIRELESS ACCESS POINT Collect data from up to 300 TS4 units Wireless mesh communication High definition sampling rate Scalable architecture Mounts easily on module frame without tools   Please Note - Registration with the Tigo Monitoring service must be completed in 90 days from the Warranty Start Date for Limited Warranty to be valid, for the following Equipment: TS4-M, -S, -O, -L, Tigo Access Point, and Cloud Connect Advanced when implemented with communication. Supplier Part No:344-00000-52 Weight:0.41 kg

Read more less

Part No: GIV-LORA Display - Energy Meter LoRa data transmission terminals universal communication interface equipment. Allows for wireless transmission of RS485 data, cutting out the need for running long cables in complex installs.  The system integrates two industrial standard RS485 interfaces and supports a variety of protocols to realise reliable data transmission between wired and wireless devices. Includes a pair of communicators (transmitter and receiver).   Set as Channel 0  Key features: Small, easy to install Long-range, up to 8km barrier free Operating temperature range: -20 to 70 oC  Please note: This device is not suitable for systems being installed under G100    Supplier Part No:GIV-LORA Weight:1 kg

Read more less

Part No: GIV-OBM-LORA-223 Display - Energy Meter LoRa data transmission terminals universal communication interface equipment. Allows for wireless transmission of RS485 data, cutting out the need for running long cables in complex installs.  The system integrates two industrial standard RS485 interfaces and supports a variety of protocols to realise reliable data transmission between wired and wireless devices. Includes a pair of communicators (transmitter and receiver). Set as Channel 0  Key features: Small, easy to install Long-range, up to 8km barrier free Operating temperature range: -20 to 70 oC  Please note: This device is not suitable for systems being installed under G100    Supplier Part No:GIV-LORA-LCD Weight:0.26 kg

Read more less

Part No: DTSU666-H-3PH-250A Display - Energy Meter Huawei Smart Power Sensor 3 phase DTSU666-H with 3x 250A CTs    Smart Energy Meter can be used for export limitation using Huawei inverters. See G100 document for details.   Please note current clamps should be sized according to incoming grid supply in the property (not size of the PV array), please check if these 250A CTs are sufficient before buying.     Huawei Part Code: 20022249-001     Supplier Part No:020022249-001 Weight:1.5 kg

Read more less

Part No: SE-LTE-B-R0-GLO-V-S0 Display - Remote GSM Monitoring Cellular Plug-IN CELL-B-R0-GLO-V-S0 Cellular Interent Connectivity for Commercial and Residential Installations Compatible with SetApp-enabled inverters Connects SolarEdge inverters wirelessly to the internet No need for internet infrastructure at site Installed within the inverter enclosure for outdoor resilience, or in the communication gateway Supports high bandwidth monitoring of inverters, optimizers, batteries, meters and weather stations Enables remote analysis and troubleshooting   Supplier Part No:CELL-B-R0-GLO-V-S0 Weight:0.007 kg

Read more less

Part No: SOL-METER-3PH-CT3 Display - Power Management Three phase meter with external CTs for Export Limitation with Solis 3-phase inverters. This Solis meter is an exceptional device that allows the calculation of electricity consumption on selected inverter models, you will be able to manage the electric demand perfectly for export limitation and adherence to grid regulations. Product features Temperature measurement Remote communication and Control Measurement of various electrical parameters NB. This meter should be used with single inverter deployments only. Compatibility Full 24hr net power and consumption monitoring with export limitation: Solis 4G 3-Phase 5kW to 20kW Inverters Solis S5 3-Phase 5kW to 60kW Inverters (Series 5) Only PV production monitoring and export limitation: Solis 5G 3-Phase 25kW to 40kW Inverters Solis 4G 3-Phase 50kW and 60kW Inverters Solis 5G 3-Phase 80kW and 110kW Inverters Accessories For monitoring with Solis Cloud a Solis LAN or Wi-Fi data logging stick is required. SOL-DLS-LAN - Data Logging Stick - wired LAN SOL-DLS-W - Data Logging Stick - WiFi   Comes supplied with 3x 150A:5A CTs.  When deploying with 110kW Inverter, CT upgrades are required - 200A:5A   This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.    Supplier Part No:SOL-METER-3PH-CT3 Weight:1.68 kg

Read more less

Part No: SE-CT-SPL-1000A-A Display - Current Sensor Clamps This split-core current transformer offers outstanding accuracy and one-handed operation and is only for use in Indoor environments. The Sensor supports the following measurements: AC Current Amps (A). Note: This sensor is only for use with the SolarEdge Electricity Meter 1PH/3PH 230/400V SolarEdge Modbus Meter 1 second     Supplier Part No:SECT-SPL-1000A-A Weight:0.688 kg

Read more less

Part No: FE-AIO-EM Display - Energy Meter Eastron SDM230-Modbus for Fox ESS Storage inverters.  1ph direct connected 100A   Supplier Part No:FE-AIO-EM Weight:0.22 kg

Read more less

Part No: SOL-METER-1PH-CT1 Display - Power Management ACR10R16DTE Single phase meter for Export Limitation with Solis 1phase inverters. Comes with 120A CT. Meter allows for full 24hour Consumption Monitoring.   For SA Only: For installations with the compatible single phase inverters, the inverter has to be modified in order for the meter to work. Please contact your Technical advisor.    This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a  result of incorrectly installed systems.   Important For SA Only: For installations with the compatible single phase inverters, the inverter has to be modified in order for the meter to work. Please contact your Technical advisor. Supplier Part No:SOL-METER-1PH-CT1 Weight:0.62 kg

Read more less

Part No: DDSU666-H-1PH-100A Display - Energy Meter Huawei Smart Power Sensor DDSU666-H With 1x 100A  Current Transformer Measurement accuracy ＞class 1 within full temperature range Simple & Easy LCD display, convenient for users, easy to set and check Visual color identification for simple wiring Energy Efficient Overall power consumption ≤ 1 W Standard din-rail mounting of DIN 35mm   Supplier Part No:DDSU666-H Weight:1.5 kg

Read more less

Part No: FE-GSM-STICK Display - Web Interfaces The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also available via your smartphone or web portal.   Supplier Part No:4G/GPRS Dongle Weight:0.14 kg

Read more less

Part No: SE1000-RS485-IF01 Display - Communications Expanding Wired Connectivity Provides an additional RS485 port for enhanced communications Located within the inverter enclosure for outdoor protection. Suitable for installation in the SolarEdge Control and Communication Gateway. Reduces labor cost with simple and quick installation Allows daisy chain configuration of multiple RS485 buses for communications in commercial installations.   Not suitable for SetAPP inverters (without screen)!   SPECIAL ORDER ONLY - 12 WEEKS LEAD TIME   Supplier Part No:SE1000-RS485-IF Weight:0.035 kg

Read more less

Part No: SE-1000-WIFI01 Display - Web Interfaces The WiFi Communication Solution enables wireless communication between a SolarEdge inverter and a WiFi router. The Wi-Fi solution is installed in the inverter, saving the time and cost associated with installing an Ethernet connection. Feature Highlights: Extended communication range with external antenna Wi-Fi module installed within the inverter enclosure for outdoor resilience Robust communications with support of 802.11b/g/n standards Please note this WIFI Module Kit will not work with Solar Edge SetAPP inverters that do not have a display. This also includes the external antenna provided with this part – it will NOT suite new SetAPP type of inverters.   For inverters with screen ONLY.   Supplier Part No:SE1000-WIFI01 Weight:0.34 kg

Read more less

Part No: SOL-S2-WL-ST Display - Web Interfaces The Solis 2-in-1 datalogger is suitable for areas covered by Wi-Fi or LAN signals, data collection is faster, wider, and more reliable by uploading directly through to Solis Cloud. Supports Wi-Fi or LAN communication Plug and play - convenient and fast Fault alarm, real-time monitoring LED Status indicators for Power, Network, and Inverter Communication Reset button - one key to send data for convenient debugging 4-pin connector for COM port on all Solis inverters 2-year standard Solis accessory warranty.   Supplier Part No:SOL-S2-WL-ST Weight:0.16 kg

Read more less

Part No: HUA-SMART-WLAN-FE Display - Web Interfaces Huawei Smart Dongle  - Wi-Fi and Ethernet SDongleA-05 (HUA-SMART-WLAN-FE) is a smart communications expansion module that works with  Huawei inverters: (SUN2000-2/3/3.68/4/4.6/5/6-L1 SUN2000-3/4/5/6/8/10-M1 SUN2000-12/15/17/20KTL-M2 SUN2000-12/15/17/20/25KTL-M5 SUN2000-30/36/40/50KTL-M3 SUN2000-100/115KTL-M2 SUN2000-110KTL-INM2) to implement communication between inverters and the management system using WLAN (Wireless) or FE (Fast Ethernet). A Smart Dongle can be used for daisy chaining devices using RS485 communication (inverter daisy chained, or inverters connected with other devices). A maximum of 10 devices can be connected together. When multiple inverters are connected together, only one Smart Dongle or one SmartLogger is allowed.   Supplier Part No:02312QMV Weight:0.9 kg

Read more less

Part No: SE-WFGW-B-S1-RW Display - Communications The SolarEdge Gateway connects SetApp-enabled SolarEdge inverters to an internet router. This gateway is easy to install and configure using the SolarEdge app - SetApp. The antenna is locatated externally to the inverter and can support up to two repeaters for extended range. This wireless gateway supports up to 8 SolarEdge inverters on a single wireless network.   Supplier Part No:SE-WFGW-B-S1-UK Weight:0.12 kg

Read more less

Part No: SOL-DLB-W Display - Web Interfaces Datalogger Box Wifi For connecting multiple Solis inverters to Solis Cloud. Connect up to 10 inverters - Daisy Chain using RS485 Cables (Not Included) For Connecting up to only 3 Inverters - use SOL-DLB-LOOM3-2M Bare cable and correct plugs can be requested from Solis, but please note the installer will have to make them up themselves (solder the plug on to one of the cables and modify the other one).    Supplier Part No:SOLIS-DLB-WIFI Weight:0.41 kg

Read more less

Part No: SOL-RF-LINK Display - Energy Meter Used for RF Communication between the inverter and router.  Compatible with all Solis Inverters.  This is a Solis data logging device consisting of two components: RF Kit  (data logger – connected to router) and the RF stick/antenna (connected to inverter)   This is an alternative way of connecting a Solis inverter to the internet, other than standard Solis WIFi or Lan stick. To be used specifically for residential installations.  Connection is still wireless but over a different RF frequency, main benefit of this connection is if a customer changes their Wi-Fi router they do not have to set up connection to the Solis inverter again. They just unplug the RF Kit from the old router, plug it in to the new router and it all works automatically, no set up required.    Supplier Part No:SOL-RF-LINK Weight:0.21 kg

Read more less

Part No: SE-CT-SPL-250A-A Display - Current Sensor Clamps This split-core current transformer offers outstanding accuracy and one-handed operation and is only for use in Indoor environments. The Sensor supports the following measurements: AC Current Amps (A). Note: This sensor is only for use with the SolarEdge Electricity Meter 1PH/3PH 230/400V SolarEdge Modbus Meter 1 second. SolarEdge have improved the design of their 100A and 250A Split-Core CTs to reduce the size and improve installation experience.   Supplier Part No:SECT-SPL-250A-A Weight:0.24 kg

Read more less

Part No: FE-LAN-STICK Display - Web Interfaces The FoxESS Lan stick is used in place of the Wi-Fi dongle if a wired connection from inverter to the internet is required. The FoxESS LAN stick is compatible with the following FoxESS inverters: FoxESS KH 10kW FoxESS AIO 6kW   Supplier Part No:LAN Dongle Weight:0.15 kg

Read more less

Part No: SOLAX-CTSA016 Display - Current Sensor Clamps CTSA016 CT Clamp for X1-AC-3.6   Supplier Part No:CTSA016 100A Weight:0.3 kg

Read more less

Part No: GIV-EM115CT-ID3 Display - Energy Meter GivEnergy EM115 Single Phase Modbus Energy Meter for direct metering up to 100A (ID3) Product Features This meter has been set as ID3 where 3 meters is being used in a system With bi-directional energy measurement This meter is ideal for Solar PV energy metering Direct/CT connection and solid or split CT options LCD display with clear green backlight 50 Pulse output 1,2,3 and 4 tariff meter option Accuracy class B according to EN50470-3 Accuracy class 1 according to IEC62053-21 EEprom memory backup Import / Export / Generation and Consumption NET Metering to comply with OFGEM regulations on Co-located Storage   Supplier Part No:GIV-EM115CT-ID3 Weight:0.9 kg

Read more less

Part No: GIV-EM115CT-ID2 Display - Energy Meter GivEnergy EM115 Single Phase Modbus Energy Meter for direct metering up to 100A (ID2) Product Features This meter has been set as ID2 where 2 meters is being used in a system With bi-directional energy measurement This meter is ideal for Solar PV energy metering Direct/CT connection and solid or split CT options LCD display with clear green backlight 50 Pulse output 1,2,3 and 4 tariff meter option Accuracy class B according to EN50470-3 Accuracy class 1 according to IEC62053-21 EEprom memory backup Import / Export / Generation and Consumption NET Metering to comply with OFGEM regulations on Co-located Storage   Supplier Part No:GIV-EM115CT-ID2 Weight:0.9 kg

Read more less

Part No: SOL-5-IN-1-RS485 Display - Web Interfaces A 5-way communication cable for use with the WiFi BOX with up to 9 inverters.   Supplier Part No:SOL-5-IN-1-RS485 Weight:0.94 kg

Read more less

Part No: SE-CT-SPL-100A-A Display - Current Sensor Clamps This split-core current transformer offers outstanding accuracy and one-handed operation and is only for use in Indoor environments. The Sensor supports the following measurements: AC Current Amps (A). Note: This sensor is only for use with the SolarEdge Electricity Meter 1PH/3PH 230/400V SolarEdge Modbus Meter 1 second SolarEdge have improved the design of their 100A and 250A Split-Core CTs to reduce the size and improve installation experience. The new 100A CT SECT-SPL-100A-A is a 1:1 replacement for the previous 50A and 70A CTs. Thus, one CT will cover the full range from 50A to 100A installations, instead of 3 different CT products required until now.   Supplier Part No:SECT-SPL-100A-A Weight:0.24 kg

Read more less

Part No: GIV-WIFI-DONGLE Display - Web Interfaces GivEnergy Wi-Fi dongle for real time monitoring when used with the APP Product Features Flexible monitoring through IOS and Android IP65 Easy configuration and install Monitoring points every 5 minutes USB port type with Micro SIM Card   Supplier Part No:GIV-WIFI Weight:0.13 kg

Read more less

Part No: TIGO-TAP Display - Plant Communications The TAP (Tigo Access Point) is Tigo's latest wireless antenna. Is the improved model, it replaces the Tigo Gateway and has the same function.  Like the Gateway, the TAP allows wireless communication between the Cloud Connect Advanced (CCA) and the TS4 optimizers (wireless communication between TS4 Optimisers and TAP and wired RS485 connection between TAP and CCA). Tigo TAP utilises ‘mesh’ technology which allows each Tigo TS4 optimiser to act as a repeater, extending the range of TAP.  The signal and data can hop from TS4 to TS4 along many different paths. As long as the TS4 optimisers are not more than 10m from each other, the TAP total range including ‘hops’ is 35m.     For details on differences between Gateway and TAP please follow the link to Tigo website HERE.   Please Note - Registration with the Tigo Monitoring service must be completed in 90 days from the Warranty Start Date for Limited Warranty to be valid, for the following Equipment: TS4-M, -S, -O, -L, Tigo Access Point, and Cloud Connect Advanced when implemented with communication   Supplier Part No:158-00000-02 Weight:0.23 kg

Read more less

Part No: SOL-S3-GPRS-ST Display - Web Interfaces Plug and play, quick installation Fault alarm, real-time monitoring Plug and play, convenient and fast Status indicator, easy to display working status RESET button, one key to send data, convenient debugging D Please note we are awaiting some additional documentation for this item which will be uploaded imminently.     Please note this is hardware only, SIM card and data package NOT included and will have to be sourced separately.   Supplier Part No:SOL-S3-GPRS-ST Weight:0.084 kg

Read more less

Part No: CT-100-SPLIT-ROW Display - Current Sensor Clamps Split-core current transformer (CT), accuracy +/- 1%. For use with Envoy-S Metered and 3phase Envoy-S Metered    Supplier Part No:SPLIT-ROW Weight:1 kg

Read more less

Part No: CT-500A Display - Current Sensor Clamps SCT36-500/5A  Split Core Current Transformer 500A Current Transformer clamp Frequency: 50-60Hz Accuracy: ±1% between 20% - 120% Insulation voltage: 600V AC Maximum primary voltage: 5000V AC Dielectric strength: 2.5KV/1mA/1min Operating temperature: -15°C to +60°C Operating humidity: <85% Case material: PC / UL94-V0 Bobbin: PBT Core: Permalloy Internal structure: Epoxy Split core Current Transformer ( incl. fly lead )  Part No as per datasheet: SCT36-500/5A Keywords: Landis, Display, Current Sensor Clamp   Supplier Part No:STCK35-500A Weight:0.44 kg

Read more less

Part No: CT-200A Display - Current Sensor Clamps 200A Current Transformer clamp   Split Core CT Series Frequency: 50-60Hz Accuracy: ±1% between 20% - 120% Insulation voltage: 600V AC Maximum primary voltage: 5000V AC Dielectric strength: 2.5KV/1mA/1min Operating temperature: -15°C to +60°C Operating humidity: <85% Case material: PC / UL94-V0 Bobbin: PBT Core: Permalloy Internal structure: Epoxy Split core Current Transformer ( incl. fly lead ) Part No as per datasheet: SCT24 200\5 Keywords: Landis, Display, Current Sensor Clamp   Supplier Part No:SCT24-200A Weight:0.26 kg

Read more less

Part No: CT-100A Display - Current Sensor Clamps 100A Current Transformer clamp   Split Core CT Series Frequency: 50-60Hz Accuracy: ±1% between 20% - 120% Insulation voltage: 600V AC Maximum primary voltage: 5000V AC Dielectric strength: 2.5KV/1mA/1min Operating temperature: -15°C to +60°C Operating humidity: <85% Case material: PC / UL94-V0 Bobbin: PBT Core: Permalloy Internal structure: Epoxy Split core Current Transformer incl fly lead  100A Primary / 5 A Secondary Part No as per datasheet: SCT24 100\5  Keywords: Landis, Display, Current Sensor Clamp   Weight:0.26 kg

Read more less

Part No: SE-WIFI-ANTENNA Display - Web Interfaces Solar Edge Antenna for Wi-Fi and ZigBee Communications.    Simple Wireless Connectivity Used to connect a Solar Edge device to the monitoring platform via Wi-Fi Used to connect a Solar Edge device to Smart Energy devices via ZigBee communications Antenna external to inverter for wider range  Wi-Fi and Zigbee stations are built into Solar Edge device Indoor and outdoor usage 5 years warranty   All inverters with the new communication board come with integrated WiFi for commissioning with SetApp. If connection to the monitoring portal via WiFi is required then this part – antenna - is required (the signal of the integrated WiFi is not strong enough). The inverter does not need to be connected to the internet for commissioning purposes, but the installer must have an internet connection from their mobile device to download the app.   SE-ANT-ZBWIFI-KIT   Please note this WIFI Antenna will NOT work with older type Solar Edge inverters with display. For SetAPP inverters without screen ONLY.   Supplier Part No:SE-ANT-ZBWIFI-KIT Weight:0.06 kg

Read more less

Part No: SOLAX-WIFI-3.0 Display - Web Interfaces Enhance your SolaX installation by connecting it to the SolaX Cloud. This Black WiFI dongle V3 allows an wireless connection to be made to the Internet router. This is ideal when running a cable isn't possible. One dongle is needed per SolaX inverter.   Supplier Part No:SOLAX WIFI 3.0 Weight:0.2 kg

Read more less

Part No: SOLAX-WIFI Display - Web Interfaces Enhance your SolaX installation by connecting it to the SolaX Cloud. This WiFI dongle allows an wireless connection to be made to the Internet router. This is ideal when running a cable isn't possible. One dongle is needed per SolaX inverter.    Supplier Part No:Wifi dongle For X1 inverters Weight:0.105 kg

Read more less

Part No: SOLAX-G4-LAN Display - Web Interfaces SolaX - Pocket LAN V3.0 Enhance your SolaX installation by connecting it to the SolaX Cloud. This LAN dongle allows an Ethernet cable connection to be made to the Internet router. Simple and robust communication. One dongle is needed per SolaX inverter.    Supplier Part No:SOLAX LAN V3.0 BLACK Weight:0.2 kg

Read more less

Part No: SHINE-LINK-X Display - Web Interfaces ShineLink-X is a new generation monitoring solution for TL-X and TL-XE Series. It is composed of ShineLanBox and ShineRFStick. Unique wireless communication (RF433) makes the installation more convenient and flexible.   Cable free, easy installation Automatic IP addressing, plug-and-play Max. communication range of 120m, wide range cover Data archiving for 1 month data Multiple inverters supported, up to 8 Both Android and IOS UI are available Online monitoring and maintenance Remote firmware upgrades Note:This device is currently being sold with an EU plug,    Supplier Part No:Shine-link-X Weight:0.485 kg

Read more less

Part No: FE-AIO-CT Display - Current Sensor Clamps If a secondary CT is required for Fox installation, this product can be used for that requirement. This AIO-CT is compatible with the AC charger, Hybrid and All In One series.   Supplier Part No:CT Clamp Weight:0.02 kg

Read more less

Part No: JUN-BOX12 Display - Meter Enclosure Grey, plastic construction with a smooth face. Functional box with 12 cable entries for cable glands. IP55 IK07 Impact Resistance Plastic Construction Self-Extinguishing, Halogen-Free Material Fixing with Positioning Compensation   Supplier Part No:151-808 Weight:0.44 kg

Read more less

Part No: SHINE-WIFI-X Display - Web Interfaces Shine-Wi-Fi-X is a monitoring solution for grid-tie, off-grid inverter, single and three phase inverters.  Simple Allows for cable free, easy installation Plug-and-play solution USB data interface Reliable Max. communication range of 50m Works with the ShineServer Smart Both Android and IOS UI are available Shine Wi-Fi X is for -X range inverters   Supplier Part No:SHINE-WIFI-X Weight:0.06 kg

Read more less

Part No: Q.HOME-CHINT-CT Display - Accessories To be used in combination with measurement instruments: ammeters, watt-hour meters, measurement units, control relays, etc.   Weight:0.035 kg

Read more less

Part No: MC4-CRIMP-TOOL-EVO2-PRO Tools - Accessories Crimping pliers for industrial (professional) use PV-CZM-41100 for MC4-EVO2 only. These are suited for the processing of high numbers of pieces and can be adjusted to the product to be processed with the help of changeable locators and crimp inserts. Crimp cycles: 50 000 cycles after which new individual crimp inserts can be bought as spare parts. Complete tool containing insert holder (handle) with crimp insert to suit 2.5; 4 and 6 mm2 versions of the original MC4-Evo2 connectors.     Part code: 32.6020-41100 PV-CZM-41100     Important PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR STANDARD MC4 CONNECTORS. ITS FOR MC4-Evo2 ONLY   Supplier Part No:32.6020-41100 Weight:0.85 kg

Read more less

Part No: MC4-CRIMP-TOOL Tools - Accessories Crimping pliers for private use PV-CZM-BS   Suitable for the assembly of products approved by TÜV in small amounts. Simple crimping tool without locator and without spare parts (not possible to replace the inserts) Crimp cycles : 30’000 cycles guaranteed   Complete tool for the assembly of the original MC4.     part code 32.6025 PV-CZM-BS   PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR MC4-Evo2 CONNECTORS. ITS FOR STANDARD MC4 ONLY.   Important  PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR MC4-Evo2 CONNECTORS. ITS FOR STANDARD MC4 ONLY. Supplier Part No:32.6025 Weight:0.59 kg

Read more less