Smart Products Filter Index - Do not delete

Part No: SLT-120005-330 Mounting - Mounting Rails MODULE SUPPORT PROFILES Module support profile Solo Light Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Height: 40mm Width: 40mm Length: 3300mm Wall thickness: 1.2mm   Supplier Part No: 120005-03300 Weight: 3 kg Length: 3.3 m PV Light: SLT1,R2+

Read more less

Part No: SLT-109017-010 Mounting - Roof Anchor- Tile & Slates Slate for Rapid2+  To be used with SLT-109019-004 Roof Hook for Slate Replacement Tile Rapid2+ Slate125.   Supplier Part No: 109017-010 Weight: 0.2 kg

Read more less

Part No: SLT-109019-SLATE Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x SLT-109019-024 New Roof Hook for Slate Replacement Tile Rapid2+ Slate125   1 x SLT-109017-010 Slate Replacement Tile Rapid2+ Slate125   Schletter slate substitute tile with aluminium system hook for slate tiles. Might require cutting down on site.   Weight: 0.57 kg PV Light: R2+

Read more less

Part No: ER-C-U30-46-S Mounting - Module Clips Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers.   Supplier Part No: C-U/30/46 Weight: 0.072 kg Clip Type: 199 Clip H: 46 mm Clip B1: 0 mm Clip Colour: Silver  

Read more less

 Part No: ER-SP-ST Mounting - Rail Connectors The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.   Supplier Part No: SP-ST Weight: 0.185 kg

Read more less

Part No: REN-420171 Mounting - Roof Anchor- Tile & Slates This new hook has an extraordinarily high load capacity and is 25% stronger than their previously strongest model. The strength of this hook reduces mounting costs on-site, and its universal application allows for extensive configuration possibilities. Thanks to its adjustable base plate, you can position the hook optimally between the rafters or tiles. What’s more, the height of the roof hook is also adjustable in four steps to a total of 25mm, ensuring a secure and flush fitment.   You can even use the hook on uneven roofs as the product’s arm has a vertical adjustment range of 25mm on the mounting rail.16,00 mm.   Supplier Part No: 420171 Weight: 0.664 kg

Read more less

Part No: SLT-131121-002 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131121-002 Weight: 0.05 kg Clip Type: 199 Clip H: 50 mm Clip B1: 10 mm Clip Colour: Silver

Read more less

Part No: ESD-1004330 Mounting - Flat Roof FlatFix Basic is the predecessor of the FlatFix Fusion installation system. FlatFix Basic is suitable for mounting solar modules on flat roofs, both large and small. The modules can be tilted at a 15, 20 or 30 degree angle. Simple installation Solar modules in rows from left to right 3 possible tilt angles: 15, 20 and 30 degrees Suitable for most solar modules Meets all international safety requirements   Supplier Part No: 1004330 Weight: 0.043 kg

Read more less

Part No: ESD-1007226-B Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007226-B Weight: 1.164 kg

Read more less

Part No: ESD-1008049 Mounting - Metal Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008049 Weight: 0.243 kg

Read more less

Part No: ESD-1008020-B Mounting - Pitched Roof The Clickfit Evo universal module clamp is made of high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The module clamp comes standard assembled and is suitable for all framed solar panels with a thickness between 30 and 50 mm. Due to the clever design it can be used as a middle clamp and - in combination with the end cap - also as end clamp. The design also provides for potential equalization between the solar panels. The universal module clamp bites through the anodization layer of the solar panel and ensures that the solar panels are interconnected when the system is to be grounded. The clampsstandard equipped with theft delay screws and are available in the colours black and grey.   Supplier Part No: 1008020-B Weight: 0.058 kg  

Read more less

Part No: ESD-1008035 Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008035 Weight: 0.159 kg

Read more less

Part No: ESD-1008090 Mounting - Metal Roof The Clickfit Evo installation aid is made of high-quality UV-stabilized plastic composite and is resistant to the prolonged exposure to sunlight and other weather influences. When using the installation aid, the solar panel can be hung on the ClickFit mounting rail. During the transfer of the solar panels, the cables of the solar panel can be clicked into the mounting aid. This provides considerable ease of assembly and contributes to working on the roof. The mounting aid is clicked into the existing mounting holes of the solar panel and is suitable for all solar panels.   Supplier Part No: 1008090 Weight: 0.49 kg

Read more less

Part No: SLT-100020-100 Mounting - Roof Anchor- Tile & Slates The New ECO A 45 ROOF HOOK   EcoA aluminium roof hook will cover a wide range of applications on tiled roofs in future.  It makes quick and flexible installation possible by hooking in and is fastened with just one Torx pan head screw. The assembly is simplified by an additional feature: First, only the screw-on plate is mounted on the rafters and the bracket is only snapped in afterwards. At the same time, it can be combined with all common Schletter profiles   Product Features Material: Aluminium Fastening with a pan head screw Variable bridge arrangement Hook on: Our new EcoA roof hook is faster to install than ever. 10 Year Warranty   Supplier Part No: SLT-100020-100 Weight: 0.5 kg PV Light: R2+

Read more less

Part No: SSP-SLATE-PLATE-L-500-250 Mounting - Roof Anchor- Tile & Slates Quick and simple solar installations on slate roofs. No cutting, no sealants and no leaks. Available in 13 different sizes with an option of either an L or Z shaped roof hook for various mounting rail types. Compatible with Renuso.   Supplier Part No: SSP-SLATE-PLATE-L-500-250 Weight: 1 kg  

Read more less

 Part No: ESD-1008066-B Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008066-B Items in this pack: 2 Weight: 0.016 kg

Read more less

Part No: RED-HOOKSTOP Mounting - Roof Flashings Plain tiles are notorious for breaking and can be quite expensive to replace, their fragility often results in such installations taking a longer amount of time to complete to avoid damaging the roof. This simple product negates this problem by allowing the roof hook to distribute the weight of the system (or installer) through the Hookstop and into the roof (as opposed to the weight being distributed directly onto one of the plain/rosemary tiles – resulting in damage). The Hookstop is an impact-absorbing pad designed made of recycled rubber, called Rypol, designed to replace individual roof tiles typically on a plain tile (rosemary) installation. You may have come across it on playgrounds and sports surfaces. “It completely eliminates the problem on Rosemary tiled roofs of installers standing on the mounting rail and the downward flexing of the roof hook, cracking the roof tile. Hookstop, prevents this by absorbing the roof hook flexing; it significantly speeds up installation time and the cost is largely offset because there is no lead work needed.” – an installer.   Supplier Part No: RED-HOOKSTOP Weight: 0.53 kg

Read more less

Part No: ESD-1008051 Mounting - Pitched Roof   Quick installation thanks to universal hook and click system Combine hooks and screws One tool approach High quality aluminium and Magnelis steel High corrosion resistance and self-healing coating Meets all international safety requirements   Supplier Part No: 1008051 Weight: 0.457 kg

Read more less

Part No: ESD-1007225 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007225 Weight: 1.05 kg

Read more less

Part No: ESD-1007041 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007041 Weight: 0.028 kg

Read more less

Part No: REN-420023 Mounting - Flat Roof Trays The Rear grip clamp for CS (REN-420023) + enables the mounting of solar modules which do not have mounting holes in their frames on the ConSole. PV-Modules without mounting holes or modules which have the module holes on unfavourable positions (e.g. 72 cell modules) can be mounted with this item. This was not possible before with the CS+ solution. Due to that the classical (iconic) system Renusol CS+ can be used in even more cases. Please note this product includes 4 x clips   Supplier Part No: 420023 Weight: 0.15 kg      

Read more less

Part No: ESD-1006580 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty    Supplier Part No: 1006580 Weight: 0.017 kg  

Read more less

Part No: REN-520075-GROUND Mounting - Ground Mount This part is made up of the following items: 1 x REN-520075-K ConSole+ (incl. Mounting material and U-Profile)   The ConSole+ provides an angle of 15 degrees. The ConSole+ assembly system is the ideal solution for installing PV modules on the ground, especially ground that is unstable, for example landfill areas. Most commercially available framed standard PV modules fit the ConSole+. The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.   Weight: 8 kg Length: 1.71 m

Read more less

Part No: REN-520075-K Mounting - Flat Roof Trays The ConSole+ provides an angle of 15 degrees. The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+. The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual. Details: Colour: black Suitable for flat-roof- and ground mounting installations For framed PV-modules Technical Data: Material: HDPE, Aluminium and stainless steel Weight: 7,900 kg Max# module length: 1550-2400 mm Holes gap - width: 895-1014 mm Holes gap - length: 690-1180 mm Other Contents: 1 x 500075 ConSole+ 2 x 400005 ConSole U-Profile 1035 mm 4 x 900027 Hexag# screw DIN933-M6x20 A2-70 4 x 900028 Washer DIN9021-6,4-A2 4 x 900029 Self-locking hexag# nut DIN985-M6-A2 4 x 900106 ConSole Clip 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8  Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Supplier Part No: 520075-K Weight: 8 kg Length: 1.71 m

Read more less

Part No: REN-400529 Mounting - Mounting Rails VarioSole+ Mounting rail 50 x 37 x 4400mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400529 Weight: 3 kg Length: 4.4 m

Read more less

Part No: ESD-1007202 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007202 Weight: 3.207 kg Length: 1.72 m

Read more less

Part No: SSP-SLATE-PLATE-Z-500-250 Mounting - Roof Anchor- Tile & Slates Quick and simple solar installations on slate roofs. No cutting, no sealants and no leaks. Available in 13 different sizes with an option of either an L or Z shaped roof hook for various mounting rail types.   Supplier Part No: Slate Plate Z shaped Weight: 1 kg

Read more less

Part No: BALLAST-17KG Mounting - Flat Roof Solid Dense 7.3N Concrete Block Grey 100mm Robust and durable, measuring 440x215mm with a thickness of 100mm the Enviroblock® is manufactured from secondary and recycled materials and comes in a natural grey finish.   Weight approx. 17 kgs Height 215 mm Length 440 mm Width 100 mm Colour Grey To be used with all ballasted mounting solutions.   Supplier Part No: BALLAST-17KG Weight: 17 kg

Read more less

Part No: SLT-101002-020 Mounting - Roof Anchor- Tile & Slates ProLine range Schletter Rapid 2+ Roof hooks   Roof Hook Rapid2+ 35 mm height In stainless steel quality Welded Symmetric bar arrangement Pre-assembled Wood screws must be ordered separately!   Supplier Part No: 101002-020 Weight: 0.46 kg PV Light: R2+

Read more less

Part No: SLT-119001-000 Mounting - Roof Anchor- Hanger Bolts Hanger bolt KlickTop extension part for hanger bolt For M10 / M12 hanger bolts, loose, aluminium.   Supplier Part No: 119001-000 Weight: 0.12 kg Length: 0.09 m PV Light: R2+

Read more less

Part No: ESD-1007209 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007209 Weight: 2.835 kg Length: 1.82 m

Read more less

Part No: REN-500407 Mounting - Flat Roof Base rail for the FS10-EW, 2060mm.   Supplier Part No: 500407 Weight: 1.4 kg Length: 2.06 m

Read more less

Part No: ESD-1003016 Mounting - Flat Roof Quick and easy to install Unique click design Only one tool needed Also available in black Meets all international safety requirements   Supplier Part No: 1003016 Weight: 0.01 kg

Read more less

Part No: SLT-110012-200 Mounting - Roof Anchor- Hanger Bolts For corrugated sheets (such as those of fiber cement) or trapezoidal sheet roofs, corrugated roof fastening sets consisting of a special hanger bolt with EPDM seal and a mounting plate are used. Hanger bolt with valcanized EPDM-sealing (UV resistant) and 3 flange nuts in V4A quality Additional mounting rail attachment required.   Supplier Part No: 110012-200 Weight: 0.193 kg PV Light: SLT1

Read more less

Part No: REN-400288 Mounting - Roof Anchor- Seam Clamps S-5-GXM 10 Mini insert - specifically for use with the S-5-K Grip Mini clamp. Insert options: LYSAGHT KLIP-LOK® 406 McElroy Metal Mirage AEP Span Klip-Rib® Metal Sales Clip-Loc SpeedDeck® SpeedDeck® Safintra Saflok 410 Safintra Saflok 700 Domico Dach® And other similar profiles   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400288 Weight: 0.02 kg

Read more less

Part No: REN-K-GRIP-M-10 Mounting - Roof Anchor- Seam Clamps This part is made up of the following items: 1 x REN-420284 Renusol Seam Clamp K-Grip Mini (Without Screws)   1 x REN-400288 Seam clamp GXM 10 Mini Insert ( for K-Grip Mini ) (BTO UK)   Designer note: The Renusol seam clamps are part of the S5 range. You can see more details on manufacturers website HERE    The S-5-K Grip clamp was specifically developed to fit Klip-Rib® and other bulb snap-together seams. The design utilizes multiple inserts (sold separately) in order to accommodate a variety of bulb snap-together profiles. Each insert has a unique shape that allows for a tight fit and provides increased holding strength over other attachment options. The S-5-K Grip Mini is a bit shorter than the S-5-K Grip and has one base bolt rather than two. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment—just about anything!   This is a complete Seam clamp with GX 10 Mini inserts.   UK only: The clamps should meet or exceed the requirements for MCS012 wind uplift values, but since they are not officially MCS012 tested and certified, they should not be used on <50kWp installations.    Weight: 0.13 kg

Read more less

Part No: ESD-1007220 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007220 Weight: 1 kg Length: 1.82 m

Read more less

Part No: SSP-ERIC-TILE-C Mounting - Roof Anchor- Tile & Slates ERIC-TILE plain tile roof hook allows for simple solar panel installations on plain/rosemary tiled roofs. No cutting, no sealants and no leaks. Helps prevent tile breakages whilst allowing installers to stand on the mounting rail.   Manufactured using high quality materials, with the polypropylene plate’s working temperature of – 40c to 120c. A choice of either an, “L” or “C” roof hook, and fixings to secure are included with the ERIC-TILE.   Compatible with Schletter and Clenergy.   Supplier Part No: Eric tile C shaped Weight: 1 kg

Read more less

Part No: SSP-ERIC-TILE-C-SLT Mounting - Roof Anchor- Tile & Slates This part is a special offer made up of the following items: Part   1 x SSP-ERIC-TILE-C Eric Tile C roof hook (Compatible with Schletter and Clenergy)   1 x SLT-943410-025 M10x25 Square head screw   1 x SLT-943912-010 Serrated M10 flange nut   ERIC-TILE plain tile roof hook allows for simple solar panel installations on plain/rosemary tiled roofs. No cutting, no sealants, and no leaks. Helps prevent tile breakages whilst allowing installers to stand on the mounting rail. Manufactured using high-quality materials, with the polypropylene plate’s working temperature of – 40c to 120c. A choice of either an, “L” or “C” roof hook, and fixings to secure are included with the ERIC-TILE. 10 year product guarantee Compatible with Schletter.   Weight: 1.03 kg

Read more less

Part No: ESD-1007201 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007201 Weight: 2.66 kg Length: 1.72 m

Read more less

Part No: ESD-1008132 Mounting - Mounting Rails ClickFit EVO mounting rail 2338mm is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1008132 Weight: 1.323 kg Length: 2.34 m

Read more less

Part No: ESD-1007011 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007011 Weight: 0.044 kg

Read more less

Part No: EASY-A002V41N Mounting - In Roof EASY ROOF EVOLUTION Universal MCS012 certified in roof mounting solution. An unique overlapping and Interlocking mounting systems with no seal, no cut, EASY ROOF EVOLUTION fits just like tiles. EASY ROOF EVOLUTION is ideal for all kinds of roofs and tiles: residential, commercial, public building, agricultural and industrial roofs. Fits majority of PV panels currently available on the market!   Standard Black Module Middle Clamp.   Supplier Part No: A002V41N Weight: 0.026 kg

Read more less

Part No: EASY-A002V41N-SET Mounting - Module Clips This part is made up of the following items: 1 x EASY-A004V40 Middle Bracket EVOLUTION Silver   1 x EASY-A002V41N Middle Clamp EVOLUTION Standard Black   4 x EASY-V003V02 Bracket Screw 6 x 40   1 x EASY-V012V02 Module Clamp Screw M6 X 30 (for Module Frames 30 - 40mm)   This is a full set consisting of Bracket and Clamp and Bracket screws and Clamp screw.    Weight: 0.388 kg

Read more less

The Samsung 8KW EHS Mono HT Heat Pump (we call it a Stealth 8 for short) is a reliable, efficient monobloc heat pump using R32 as the refrigerant. It is super quiet and capable of 70°C flow temperature. Samsung heat pumps have a great track record of solid performance in the UK and a 7 year warranty and now they have an extremely quiet, aesthetically excellent range of single fan units with high outputs. The unit is awash with new innovations including flash injection for high temp and output, numerous noise reduction features and full output down to low outside air temperatures. Fit with a pre-plumbed cylinder or buy a MIM-E03EN control kit.   Technical Information Product number AE140BXYDGG/EU Samsung listed SCOPs @35°C 4.83 @55°C 3.75 MCS listed SCOPs @35°C 4.68 @40°C 4.41 @45°C 4.15 @50°C 3.88 @55°C 3.61 Heating nominal capacity 12.00kW Compressor type Scroll Refrigerant Type R32 Refrigerant Volume 3.3kg Required flow rate 7L/m Heating up to 70°c Min operating temperature -30°c Max operating temperature 43°c Electricity Supply 220-240V Sound Power Level 59dBA Height 999mm Width 1270mm Depth 530mm Net Weight 137kg Warranty 7 years

Read more less

Part No: REN-420401 Mounting - Roof Anchor - Corrugated Corrugated adaptor for Renusol MetaSole. This part allows MetaSole designs to be compatble with corrugated metal roof areas and enables your system to be attached to the roof with self-tapping screws, rather than drilling through the sheet into the substructure with hanger bolts. The added bonus is that no mounting rail is required, which reduces the cost of the mounting dramaticdally. Simple, secure and supremely affordable.  It must be used in conjunction with the MetaSole sheets REN-420402.    Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420401 Weight: 0.03 kg

Read more less

Part No: REN-400351 Mounting - Washers 5-mm spacer plate   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400351 Weight: 0.02 kg

Read more less

Part No: ESD-1008062 Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008062 Weight: 0.018 kg

Read more less