Solar Fitting & Mounting Kits

Part No: SLT-943308-055 Mounting - Flat Roof Bolt  M8x55 hex socket DIN912       Buy To Order part MOQ 100pcs   Supplier Part No:943308-055 Weight:0.026 kg

Read more less

Part No: GSE-GM-BOLT-CORNER-PIECE-FIX Mounting - Ground Mount M6 Screw and washer - corner fix (pack of 100) The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!   Supplier Part No:ART100125 Items in this pack:100 Weight:0.863 kg

Read more less

Part No: REN-410553   Mounting - Flat Roof This part is made up of the following items: 1 x REN-420550 TriSole+ V-frame Assembled   4 x REN-420083 Renusol Cross rail connector   1 x REN-400553 TriSole+ Vertical Support 15 degrees   TriSole + Triangle 15° assembled   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Weight:1.85 kg  

Read more less

Part No: REN-900054 Mounting - Flat Roof Keywords: REN900054, Renusol, PV Mounting, Flat Roof   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:900054 Items in this pack:100 Weight:0.55 kg

Read more less

Part No: VIR-F16-J-M10 Mounting - In Roof Clearline Fusion Aesthetics: Roof integrated panels sit lower to the roofline, without brackets and racking on show, to look like an intended part of the roof Roof maintenance: The roof covering can be easily maintained or replaced without the cost of dismantling a solar installation. Problems associated with bird infestation are avoided. Industry-leading panel spacing: The gap between rows is only 5mm. Columns are spaced by 30mm Simple: Fusion achieves exceptional fire performance, wind resistance and weather tightness without extra roof battens, adhesive flashing rolls or fire proofing materials. Everything you need is right there in the kit. Robust: Certified wind resistance is more than four times higher than competitor products. Universal: Works with all commonly used tiles and slates, including slate over sarking.   Supplier Part No:F16-J-M10 Weight:2.1 kg

Read more less

Part No: SDA10MB Mounting - Cable Flashings Don't risk roof leaks and cable damage by pushing unprotected cables under the tiles or slates. The MCS INstallation Guide for PV requires that cable penetrations through the roof should not affect the weather tightness of the roof and should be durably sealed. The Dektite Multicable is a simple, effective and universal way to ensure this requirement is met. At the same time it protects cables from damage through contact with other roof materials. The economical soft temper aluminium base  is ideal for slate or plain tile roof. Base 450 x 600mm. Dektite Multicable - Alminium base - SDA10MB * Durable purpose made weatherproofing product as per MCS * Fits all types of tile or slate roof * Quick and easy to install - only tool needed cable snips * Protects up to 10 cables from damage * Low cost  Aluminium base - ideal for plain tile or slate roof * 20 year warranty   Supplier Part No:SDA10MB Weight:0.95 kg

Read more less

Part No: VIR-F16-LC-G1 Mounting - In Roof Viridian Clearline Fusion G1 landscape roofing kit, Centre. Used for roof integrated PV module mounting systems.   Supplier Part No:F16-LC-G1 Weight:12 kg Length:1.8 m

Read more less

Part No: ESD-1004430 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No:1004430 Weight:0.043 kg

Read more less

Part No: SLT-163900-012 Mounting - FixGrid FixGrid FixZ-7 lower system rail 96mm with connector fixgrid   Supplier Part No:163900-012 Weight:0.105 kg

Read more less

Part No: VIR-F16-LR-G1 Mounting - In Roof Viridian Clearline Fusion G1 landscape roofing kit, Right. Used for roof integrated PV module mounting systems.   Supplier Part No:F16-LR-G1 Weight:12 kg Length:1.8 m

Read more less

Part No: GSE-GM-RAIL-3.58 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No:ART105078 Weight:3.981 kg Length:0 m

Read more less

Part No: REN-500459 Mounting - Flat Roof Streamliner for FS18-S  REN-500459 This streamliner version is for 18deg mounting angle and supports modules of up to 1875mm in length (with 25mm overlap on ridge) or 1825mm w(ithout 25 mm overlap on ridge support).  Product Features Single part, improving stockholding Easier installation due to less necessary screws Compatible with longer modules   FS10-S XL 1825 mm 1900 mm 500459 - 1875 mm   Supplier Part No:REN-500456 Weight:4.36 kg Length:1.88 m

Read more less

Part No: REN-500457 Mounting - Flat Roof Streamliner for FS18-S   500454 This streamliner version is for 18deg mounting angle and supports modules of up to 1750mm in length (with 25mm overlap on ridge) or 1825mm w(ithout 25 mm overlap on ridge support).  Product Features Single part, improving stockholding Easier installation due to less necessary screws Compatible with longer modules   Supplier Part No:REN-500457 Weight:3.375 kg Length:2.15 m

Read more less

Part No: VIR-F16-LL-G1 Mounting - In Roof Viridian Clearline Fusion G1 landscape roofing kit, Left. Used for roof integrated PV module mounting systems.   Supplier Part No:F16-LL-G1 Weight:12 kg Length:1.8 m

Read more less

Part No: VIR-F16-TL-M10 Mounting - In Roof Clearline Fusion Aesthetics: Roof integrated panels sit lower to the roofline, without brackets and racking on show, to look like an intended part of the roof Roof maintenance: The roof covering can be easily maintained or replaced without the cost of dismantling a solar installation. Problems associated with bird infestation are avoided. Industry-leading panel spacing: The gap between rows is only 5mm. Columns are spaced by 30mm Simple: Fusion achieves exceptional fire performance, wind resistance and weather tightness without extra roof battens, adhesive flashing rolls or fire proofing materials. Everything you need is right there in the kit. Robust: Certified wind resistance is more than four times higher than competitor products. Universal: Works with all commonly used tiles and slates, including slate over sarking.   Supplier Part No:F16-TL-M10 Weight:8 kg

Read more less

Part No: VIR-F16-TR-M10 Mounting - In Roof Clearline Fusion Aesthetics: Roof integrated panels sit lower to the roofline, without brackets and racking on show, to look like an intended part of the roof Roof maintenance: The roof covering can be easily maintained or replaced without the cost of dismantling a solar installation. Problems associated with bird infestation are avoided. Industry-leading panel spacing: The gap between rows is only 5mm. Columns are spaced by 30mm Simple: Fusion achieves exceptional fire performance, wind resistance and weather tightness without extra roof battens, adhesive flashing rolls or fire proofing materials. Everything you need is right there in the kit. Robust: Certified wind resistance is more than four times higher than competitor products. Universal: Works with all commonly used tiles and slates, including slate over sarking.   Supplier Part No:F16-TR-M10 Weight:7 kg

Read more less

Part No: VIR-F16-LC-M10 Mounting - In Roof Clearline Fusion Aesthetics: Roof integrated panels sit lower to the roofline, without brackets and racking on show, to look like an intended part of the roof Roof maintenance: The roof covering can be easily maintained or replaced without the cost of dismantling a solar installation. Problems associated with bird infestation are avoided. Industry-leading panel spacing: The gap between rows is only 5mm. Columns are spaced by 30mm Simple: Fusion achieves exceptional fire performance, wind resistance and weather tightness without extra roof battens, adhesive flashing rolls or fire proofing materials. Everything you need is right there in the kit. Robust: Certified wind resistance is more than four times higher than competitor products. Universal: Works with all commonly used tiles and slates, including slate over sarking.   Supplier Part No:F16-LC-M10 Weight:12 kg

Read more less

Part No: ESD-1008013 Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No:1008013 Weight:0.365 kg

Read more less

Part No: ESD-1007637 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features Black profile for connecting rows of solar modules in case of a east-west faced layout. EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No:1007637 Weight:0.217 kg

Read more less

Part No: REN-400602 Mounting - Roof Anchor- Seam Clamps Renusol Seam Clamp KL+   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.     Supplier Part No:400602 Weight:0.19 kg

Read more less

Part No: DFE101BM Mounting - In Roof Ideal for weatherproofing cable entry on commercial PV installations. Avoid unwanted long cable runs on roof and down side of building. Dektite allows cables to be taken safely through any trapezoidal or corrugated roof wherever requred. Ensure that MCS weatherpoofing requirements are met by using purpose made products and at the same time protect cables from damage by isolating them from contact with roof materials. Each flashing takes up to 12 cables The Dektite Premium is an easy to install, effective and low cost solution backed by a 20 year warranty and Deks Industries' 50 years experience in design and manufacture of polymer roof flashings. Fix with Dektite Fixing Kit DFK1 which contains sufficient sealant and fixings for two or three flashings, depending on type of roof sheet. Dektite Premium DFE101BM * Purpose made weatherproofing as required by MCS * Avoids unwanted long cable runs on roof * Protects cables from damage - up to 12 through each flashing * Tough UV resistant EPDM * Fits any trapezoidal or corrugated profile * Easy to fit using Dektite Fixing Kit DFK1 * 20 year Dektite warranty   Supplier Part No:DFE101BM Weight:0.09 kg

Read more less

Part No: REN-900205 Mounting - Storm Washers Technical Data Applicational Data Material Dimensions Weight Compatible EPDM pre-assembled Port diameter 7.3 mm Angle: 15° Aluminium EPDM 45 x 23 x 9 mm 0,006 kg Solar fasteners   Keywords: REN900205, Renusol, PV Mounting, Storm Washer   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:900205 Weight:0.001 kg

Read more less

Part No: REN-400525-B Mounting - Mounting Rails Renusol Mounting Rail, to be used with the VarioSole product range.   Supplier Part No:400525-B Weight:3 kg Length:4.4 m

Read more less

Part No: REN-900016 Mounting - Fixings Hexagonal flanged bolt with serration M8x14   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:900016 Weight:0.01 kg

Read more less

Part No: SLT-112001-000 Mounting - Roof Anchor- Seam Clamps Seam clamp 503 VA for standing seam roof Please note: In case of roofs made of titanium zinc sheet metal, please verify that the standing seams have sufficient load-bearing capacity! Keywords: SLT112001000, Schletter, PV Mounting, Roof Anchor- Seam Clamp   Supplier Part No:112001-000 Weight:0.33 kg PV Light:R2+

Read more less

Part No: ESD-1007175 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No:1007175 Weight:0.448 kg Length:0.75 m

Read more less

Part No: REN-400552 Mounting - Flat Roof TS+ Support 10° This is the short vertical length of a Renusol TriSole+ frame. The two long lengths are ordered as REN-420550.    Supplier Part No:400552 Weight:0.1 kg

Read more less

Part No: REN-410552 Mounting - Flat Roof This part is made up of the following items: 1 x REN-420550 TriSole+ V-frame Assembled   4 x REN-420083 Renusol Cross rail connector   1 x REN-400552 TriSole+ Vertical Support 10 degrees   TriSole + Triangle 10° assembled   Weight:1.81 kg

Read more less

Part No: SLT-169019-210 Mounting - FixGrid Fix Grid 18 FixZ-15 Windsafe18 to 2067mm for 72 cell modules fixgrid   Supplier Part No:169019-210 Weight:1.5 kg Length:2.1 m

Read more less

Part No: SLT-169020-210 Mounting - FixGrid FixGrid ballast shaft 18 mm to 2067mm module width fixgrid   Supplier Part No:SLT-169020-210 Weight:1.969 kg Length:2.1 m

Read more less

Part No: REN-420182 Mounting - Roof Anchor- Tile & Slates Renusol have created this roof hook specifically for the UK market. It is compatible with S-Shaped, Modern interlocking, Flat and Slate tiles, and can be used with the VarioSole product range.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:420182 Weight:0.96 kg

Read more less

Part No: GSE-GM-BOLT-2PER-SQR Mounting - Ground Mount M10 SCREW & WASHER - TRY SQUARE FIXATION The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!   Supplier Part No:ART100938 Items in this pack:20 Weight:0.002 kg

Read more less

Part No: ER-I-PRO-01A-LS Mounting - Roof Anchor- Tile & Slates Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers.   Supplier Part No:ER-I-PRO/01A/LS Weight:0.732 kg

Read more less

Part No: ESD-1007137 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No:1007137 Weight:0.217 kg

Read more less

Part No: REN-420165 Mounting - Roof Anchor- Tile & Slates ROOF HOOK ECO BASIC (WITHOUT WOOD SCREW) Size: 150x180x170 mm Weight: 0,55 kg Set pre-assembled Dimensions base plate: 50 x 150 mm Material: Galvanised steel Material thickness: 5,0 / 4,0 mm Hammerhead Bolt Ø: M8   Applicable with: Wood Roof decking: Tiled roof No of screws: 2/3 x 6,0 Horizontal adjustment: 60,0 mm Height adjustment: 37,50 mm   Duration of protection Zinc coating according to EN ISO 14713-1:2017 Zinc coating Duration of protection in Corrosion category C3 (medium con­tamination or light chloride load): 26-78 years   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:420165 Weight:0.54 kg

Read more less

Part No: REN-420259 Mounting - Roof Anchor- Seam Clamps Designer note: The Renusol seam clamps are part of the S5 range. You can see more details on manufacturers website HERE  UK only: These clamps are now MCS012 certified with Renusol Variosole +   Supplier Part No:420259 Weight:0.11 kg

Read more less

Part No: SLT-112002-003 Mounting - Roof Anchor- Seam Clamps SHEET METAL SEAM CLAMPS Please note: The tightening torque must be limited so that the sheet metal seam does not become distorted and the thermal lengthening of the sheets is not prevented! Folding clamp 510 AL Rapid for KalZip and similar. Non-penetrative clamps   Supplier Part No:112002-003 Weight:0.12 kg PV Light:R2+

Read more less

Part No: SLT-101020-120 Mounting - Roof Anchor- Tile & Slates Schletter RapidA Pro 45 Max roof hooks The aluminium roof hook covers most of the applications on tiled roofs and is suitable for higher snow loads and wind loads. It allows quick and flexible mounting by hooking and is fastened with only one pan head screw with Torx. The screw-on plate is mounted on the rafter and the bracket is then clicked into place. Due to a rotatable multi-adapter, the roof hook can be combined with the profiles of the ProLine series and the classic Schletter modular system and has a height adjustment at the upper connection and a corresponding quick-mounting adapter.   In aluminium Mounting with only one bolt Variable bar arrangement Clamping part pre-assembled   Wood screws must be ordered separately!   Supplier Part No:SLT-101020-120 Weight:0.37 kg

Read more less

Part No: SLT-169020-170 Mounting - FixGrid FixGrid ballast shaft 18 mm to 1700 mm module width fixgrid   Supplier Part No:169020-170 Weight:1.618 kg Length:1.7 m

Read more less

Part No: REN-500505 Mounting - Flat Roof Base Rail FS18-S 1739 mm   fs10 fs18   fs18 fs   Supplier Part No:500505 Weight:1.2 kg Length:1.74 m

Read more less

Part No: REN-420183 Mounting - Roof Anchor- Tile & Slates Renusol have created this roof hook specifically for the UK market. It is compatible with S-Shaped, Modern interlocking, Flat and Slate tiles, and can be used with the VarioSole product range. Click here to watch this handy installation video   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:420183 Weight:1.06 kg

Read more less

Part No: GSE-GM-TOUCH-UP-SPRAY Mounting - Ground Mount Perfect zinc spray Anti-Corrosive Protection Spray 400mL Outstanding long-term protection and optimum metal surface appearance High layer thickness in first spray pass High degree of safety thanks to optimum weathering protection Minimum amount of time spent, as only one operation is required Good coverage Versatile use with adjustable spray head Large area and minor repairs can be carried out quickly and reliably with the variable spray head. High degree of resistance to running High degree of wear resistance Tested corrosion protection in accordance with DIN. Perfect zinc spray, light: 250 hours Perfect zinc spray: 500 hours Can be used for repairs in accordance with DIN EN ISO 1461   Supplier Part No:ART101025 Weight:0.4 kg

Read more less

Part No: REN-300224 Mounting - Roof Anchor- Trapezoidals EPDM rubber seal on a roll to be used with Metasole + Portrait  3.6m REN-400405 or 4.2m  REN-400406   Supplier Part No:300224 Weight:0.03 kg

Read more less

Part No: REN-900015-100 Mounting - Fixings Description Technical Data Material Dimensions Weight Anti-slip protection Hexagon head Stainless steel 6 x 20 mm 0,009 kg pack of 100 pcs Keywords: REN900015, Renusol, PV Mounting, Fixings   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:R900015-100 Weight:0.2 kg

Read more less

Part No: ESD-1007086 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No:1007086 Weight:4.08 kg Length:2.11 m

Read more less

Part No: ESD-1007224-B Mounting - Flat Roof Complete modular system and aerodynamic design Single or dual-tilt (east-west) configuration Unique thermal break prevents damage to the roofing material For most modern solar modules (tilt angle 13 degrees) Easy to install around obstacles Meets all international safety requirements   Supplier Part No:1007224-B Weight:1.05 kg

Read more less

Part No: RSPRO-A2SS-CS-6X80-50 Mounting - Wood Screws RS PRO - 6mm x 80mm Wood Screw (Pack of 50)    Supplier Part No:1443515 Items in this pack:50 Weight:0.45 kg

Read more less

Part No: ESD-1007226-B Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No:1007226-B Weight:1.164 kg

Read more less