Solar Fitting & Mounting Kits

Part No: GEN-SLATE-NEW Mounting - Roof Flashings The SolarFlash™ system is a simple and effective waterproof solution to refitting roofing slates or tiles around a roof bracket when installing solar photovoltaic, or other, panels. By installing with SolarFlash™, it can help you to ensure that all your installations are MCS 012 compliant. SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims   Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005.    Supplier Part No: SFS001 Weight: 0.24 kg

Read more less

Part No: SLATE-REN-GEN-NEW Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x REN-420181 Roof hook UK Plain tiles/slates (without wood screw)   1 x GEN-SLATE-NEW Genius Roof - Slate Kit for New Build   Renusol plain roof anchor with Genius Roofing slate refit kit. This part contains:  - 1 x REN-420181 - 1 x GEN-SLATE-NEW   Does not come supplied with Hall Hooks - these might have to be purchased separately.    Weight: 0.96 kg

Read more less

Part No: ESD-1007505 Mounting - Flat Roof Complete modular system and aerodynamic design Single or dual-tilt (east-west) configuration Unique thermal break prevents damage to the roofing material For most modern solar modules (tilt angle 13 degrees) Easy to install around obstacles Meets all international safety requirements   Supplier Part No: 1007505 Weight: 0.001 kg

Read more less

Part No: EASY-V012V02 Mounting - In Roof EASY ROOF EVOLUTION Universal MCS012 certified in roof mounting solution. An unique overlapping and Interlocking mounting systems with no seal, no cut, EASY ROOF EVOLUTION fits just like tiles. EASY ROOF EVOLUTION is ideal for all kinds of roofs and tiles: residential, commercial, public building, agricultural and industrial roofs. Fits majority of PV panels currently available on the market!     Module Clamp Screw M6 X 30 suitable for Modules with Frame thickness 30 - 40mm

Read more less

Part No: REN-900246 Mounting - Rail End Caps Technical Data Material Dimensions Weight Compatible Components Average thicknesss 2,00 mm Colour: grey   41 x 35 x 15 mm 0,007 kg 400511, 400511-B, 400512, 400512-B, 400513, 1 x End cap (grey)     Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 900246 Weight: 0.004 kg

Read more less

Part No: REN-420423 Mounting - Roof Anchor- Trapezoidals RENUSOL METASOLE+  Rooftop mounting system for trapezoidal and corrugated sheet metal roofs. 125mm long rail, 72mm high.  High Top design raises PV modules higher from the roof surface to increase ventilation and thereby increase the performance of the modules in high temperature applications. 100mm distance to the roof. Short, non-continuous rails lead to material saving solar installation on trapezoidal sheet. Horizontal PV module orientation PV modules with a frame height of 30 to 50 mm are attached to the MS+ HT mounting system in landscape, arranged in columns on the trapezoidal sheet. Installation without pilot drilling - self-tapping screws fix the MS+P PV mounting system directly to the trapezoidal sheet. For trapezoidal steel sheet 0.4-1.25mm thickness and aluminium sheet 0.5-2.00mm thickness Readymade kits suitable for the installation of PV systems on trapezoidal sheet steel and / or aluminium in various thicknesses.  MS+ HT consists of 1 x High Top Mounting Plate and 2 x REN-400281 screws (not sold separately)   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.

Read more less

Part No: ESD-1008065 Mounting - Metal Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008065 Weight: 0.014 kg

Read more less

Part No: ESD-1007022 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007022 Weight: 0.252 kg

Read more less

Part No: GSE-WEDGES-TWINPACK Mounting - In Roof   Supplier Part No: GSE-WEDGES-TWINPACK Items in this pack: 4 Weight: 0.035 kg

Read more less

Part No: REN-500411 Mounting - Flat Roof fs10 fs18   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 500411 Weight: 0.14 kg

Read more less

Part No: ESD-1007196 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. FlatFix Fusion base profile panels 1114-1150mm width Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007196 Weight: 0.6 kg Length: 0.94 m

Read more less

Part No: ESD-1007272 Mounting - Washers   Supplier Part No: 1007272 Weight: 0.001 kg

Read more less

Part No: REN-400532 Mounting - Rail Connectors Technical Data: Dimensions: 195 x 27,9 x 38,8mm Weight: 0.193kg Rail Length: 195,0mm Material: Aluminium Certification: TUV ID:48970; MCS012 IK0197/03 Useable with: VS+ Mounting rail 50 x 37mm Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Supplier Part No: 400532 Weight: 0.19 kg

Read more less

Part No: ESD-1008133 Mounting - Mounting Rails ClickFit EVO mounting rail 3242mm is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1008133 Weight: 1.974 kg Length: 3.49 m

Read more less

Part No: SLT-119026-122 Mounting - Flat Roof RapidPro L bracket connector Angle attachment for connecting profiles to the ProLine series.   Supplier Part No: 119026-122 Weight: 0.27 kg

Read more less

Part No: ER-I-PRO-07 Mounting - Roof Anchor- Tile & Slates The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.   Supplier Part No: ER-I-PRO/07 Weight: 0.5 kg

Read more less

Part No: SLT-129063-000 Mounting - Cruciforms Rapid cross connector - The convenient way to connect overlapping rails Economically priced, quick and safe. Allows for a cross-rail system for a change in module layout, which also benefits from better cooling due to increased spacing. Clips directly on seamed metal roofs clamps for a portrait mounting rail-system. Fully pre-assembled and connects in 3 simple steps to any Schletter-Klick channel M8 slot. Hook in clamp ensures that rails will not be twisted due to unsymmetrical loads.   All benefits of the Rapid system can now also be leveraged by the cross rail system!    This part replaces 'KlickTop M8 cross connector kit SLT-129004-000’ and because the bearing surface is identical, only the “clamping” method is different, both parts can be used on the same site if needed.     Supplier Part No: 129063-000 Weight: 0.08 kg PV Light: R2+

Read more less

Part No: SLATE-REN-GEN-V Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x GEN-SLATE Genius Roof - Slate Refit Kit   1 x REN-420181 Roof hook UK Plain tiles/slates (without wood screw)   1 x REN-420352 UK M8 Bracket 90°   Renusol plain roof anchor for vertical mounting rails with Genius Roofing slate refit kit. This part contains:  - 1 x REN-420181 - 1 x GEN-SLATE - 1 x REN-420352   Weight: 1.15 kg

Read more less

Part No: REN-400525 Mounting - Mounting Rails Renusol Mounting Rail, to be used with the VarioSole product range. Now supplied in longer, 4.4m lengths.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400525 Weight: 3 kg Length: 4.4 m

Read more less

Part No: SLT-129060-000 Mounting - Rail Connectors Schletter Solo and Solo Light internal rail connector. Used to join two rails together to create longer spans. This product contains 1x aluminium parts. Screws are sold seperately.  Recommended on trapezoidal roofs where rail alignment is a priority. Especially useful when using single fix trapezoidal fixings where standard external connectors could prevent the rails from sitting properly on the roof crests. Warning:  943755-925 Screws are not included, please use 4 x 943755-925 per two solo rail connectors. Important SA - Required - 4 x Self Drilling Screw 5.5 x 25 A2 Part No. SLT-943755-925 - For Connectors. Supplier Part No: 129060-000 Weight: 0.07 kg

Read more less

Part No: REN-900001 Mounting - Fixings Hexagon Flange Nut With Serration.   Supplier Part No: 900001 Weight: 0.007 kg

Read more less

Part No: ESD-1008060 Mounting - Pitched Roof The Clickfit Evo mounting rail end cap is made of high quality plastic composite and is therefore resistant to the long-term exposure to sunlight and other weather influences. The end cap ensures a beautiful and finished whole and a windproof closure of the mounting rail. The end cap, in combination with the universal module clamp, forms the end clamp. The end cap slides under the solar panel and removes the view of the mounting rail from the ground. When placing black solar panels, the use of black mounting rails is no longer necessary. The Clickfit Evo mounting rail end cap is available in the colours black and grey.   Supplier Part No: 1008060 Weight: 0.031 kg

Read more less

Part No: GSE-FRAMEHC-POR-1710-1055 Mounting - In Roof GSE module mounting plate for one portrait PV module including Half Cell with length 1670-1780mm and width 1050-1055mm.  MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!    Please note this frame can support modules up to 1780 x 1055mm as an exemption from standard rule and only providing the installer increases the gap between frames as per this document. Supplier Part No: ART104413 Weight: 5 kg Length: 1.76 m

Read more less

Part No: ESD-1008033 Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008033 Weight: 0.118 kg

Read more less

Part No: SLT-101004-020 Mounting - Roof Anchor- Tile & Slates Schletter Rapid 2+ NEW Proline Roof hooks   Roof Hook Rapid2+ 45 mm height In stainless steel quality Welded Symmetric bar arrangement Pre-assembled Universally adjustable, for vertical rail mounting (portrait) Wood screws must be ordered separately!   Supplier Part No: 101004-020 Weight: 1.1 kg PV Light: R2+

Read more less

Part No: SLT-120005-330 Mounting - Mounting Rails MODULE SUPPORT PROFILES Module support profile Solo Light Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Height: 40mm Width: 40mm Length: 3300mm Wall thickness: 1.2mm   Supplier Part No: 120005-03300 Weight: 3 kg Length: 3.3 m PV Light: SLT1,R2+

Read more less

Part No: SLT-109017-010 Mounting - Roof Anchor- Tile & Slates Slate for Rapid2+  To be used with SLT-109019-004 Roof Hook for Slate Replacement Tile Rapid2+ Slate125.   Supplier Part No: 109017-010 Weight: 0.2 kg

Read more less

Part No: SLT-109019-SLATE Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x SLT-109019-024 New Roof Hook for Slate Replacement Tile Rapid2+ Slate125   1 x SLT-109017-010 Slate Replacement Tile Rapid2+ Slate125   Schletter slate substitute tile with aluminium system hook for slate tiles. Might require cutting down on site.   Weight: 0.57 kg PV Light: R2+

Read more less

Part No: ER-C-U30-46-S Mounting - Module Clips Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers.   Supplier Part No: C-U/30/46 Weight: 0.072 kg Clip Type: 199 Clip H: 46 mm Clip B1: 0 mm Clip Colour: Silver  

Read more less

 Part No: ER-SP-ST Mounting - Rail Connectors The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.   Supplier Part No: SP-ST Weight: 0.185 kg

Read more less

Part No: REN-420171 Mounting - Roof Anchor- Tile & Slates This new hook has an extraordinarily high load capacity and is 25% stronger than their previously strongest model. The strength of this hook reduces mounting costs on-site, and its universal application allows for extensive configuration possibilities. Thanks to its adjustable base plate, you can position the hook optimally between the rafters or tiles. What’s more, the height of the roof hook is also adjustable in four steps to a total of 25mm, ensuring a secure and flush fitment.   You can even use the hook on uneven roofs as the product’s arm has a vertical adjustment range of 25mm on the mounting rail.16,00 mm.   Supplier Part No: 420171 Weight: 0.664 kg

Read more less

Part No: SLT-131121-002 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131121-002 Weight: 0.05 kg Clip Type: 199 Clip H: 50 mm Clip B1: 10 mm Clip Colour: Silver

Read more less

Part No: ESD-1004330 Mounting - Flat Roof FlatFix Basic is the predecessor of the FlatFix Fusion installation system. FlatFix Basic is suitable for mounting solar modules on flat roofs, both large and small. The modules can be tilted at a 15, 20 or 30 degree angle. Simple installation Solar modules in rows from left to right 3 possible tilt angles: 15, 20 and 30 degrees Suitable for most solar modules Meets all international safety requirements   Supplier Part No: 1004330 Weight: 0.043 kg

Read more less

Part No: ESD-1007226-B Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007226-B Weight: 1.164 kg

Read more less

Part No: ESD-1008049 Mounting - Metal Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008049 Weight: 0.243 kg

Read more less

Part No: ESD-1008020-B Mounting - Pitched Roof The Clickfit Evo universal module clamp is made of high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The module clamp comes standard assembled and is suitable for all framed solar panels with a thickness between 30 and 50 mm. Due to the clever design it can be used as a middle clamp and - in combination with the end cap - also as end clamp. The design also provides for potential equalization between the solar panels. The universal module clamp bites through the anodization layer of the solar panel and ensures that the solar panels are interconnected when the system is to be grounded. The clampsstandard equipped with theft delay screws and are available in the colours black and grey.   Supplier Part No: 1008020-B Weight: 0.058 kg  

Read more less

Part No: ESD-1008035 Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008035 Weight: 0.159 kg

Read more less

Part No: ESD-1008090 Mounting - Metal Roof The Clickfit Evo installation aid is made of high-quality UV-stabilized plastic composite and is resistant to the prolonged exposure to sunlight and other weather influences. When using the installation aid, the solar panel can be hung on the ClickFit mounting rail. During the transfer of the solar panels, the cables of the solar panel can be clicked into the mounting aid. This provides considerable ease of assembly and contributes to working on the roof. The mounting aid is clicked into the existing mounting holes of the solar panel and is suitable for all solar panels.   Supplier Part No: 1008090 Weight: 0.49 kg

Read more less

Part No: SLT-100020-100 Mounting - Roof Anchor- Tile & Slates The New ECO A 45 ROOF HOOK   EcoA aluminium roof hook will cover a wide range of applications on tiled roofs in future.  It makes quick and flexible installation possible by hooking in and is fastened with just one Torx pan head screw. The assembly is simplified by an additional feature: First, only the screw-on plate is mounted on the rafters and the bracket is only snapped in afterwards. At the same time, it can be combined with all common Schletter profiles   Product Features Material: Aluminium Fastening with a pan head screw Variable bridge arrangement Hook on: Our new EcoA roof hook is faster to install than ever. 10 Year Warranty   Supplier Part No: SLT-100020-100 Weight: 0.5 kg PV Light: R2+

Read more less

Part No: SSP-SLATE-PLATE-L-500-250 Mounting - Roof Anchor- Tile & Slates Quick and simple solar installations on slate roofs. No cutting, no sealants and no leaks. Available in 13 different sizes with an option of either an L or Z shaped roof hook for various mounting rail types. Compatible with Renuso.   Supplier Part No: SSP-SLATE-PLATE-L-500-250 Weight: 1 kg  

Read more less

 Part No: ESD-1008066-B Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008066-B Items in this pack: 2 Weight: 0.016 kg

Read more less

Part No: RED-HOOKSTOP Mounting - Roof Flashings Plain tiles are notorious for breaking and can be quite expensive to replace, their fragility often results in such installations taking a longer amount of time to complete to avoid damaging the roof. This simple product negates this problem by allowing the roof hook to distribute the weight of the system (or installer) through the Hookstop and into the roof (as opposed to the weight being distributed directly onto one of the plain/rosemary tiles – resulting in damage). The Hookstop is an impact-absorbing pad designed made of recycled rubber, called Rypol, designed to replace individual roof tiles typically on a plain tile (rosemary) installation. You may have come across it on playgrounds and sports surfaces. “It completely eliminates the problem on Rosemary tiled roofs of installers standing on the mounting rail and the downward flexing of the roof hook, cracking the roof tile. Hookstop, prevents this by absorbing the roof hook flexing; it significantly speeds up installation time and the cost is largely offset because there is no lead work needed.” – an installer.   Supplier Part No: RED-HOOKSTOP Weight: 0.53 kg

Read more less

Part No: ESD-1008051 Mounting - Pitched Roof   Quick installation thanks to universal hook and click system Combine hooks and screws One tool approach High quality aluminium and Magnelis steel High corrosion resistance and self-healing coating Meets all international safety requirements   Supplier Part No: 1008051 Weight: 0.457 kg

Read more less

Part No: ESD-1007225 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007225 Weight: 1.05 kg

Read more less

Part No: ESD-1007041 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007041 Weight: 0.028 kg

Read more less

Part No: REN-420023 Mounting - Flat Roof Trays The Rear grip clamp for CS (REN-420023) + enables the mounting of solar modules which do not have mounting holes in their frames on the ConSole. PV-Modules without mounting holes or modules which have the module holes on unfavourable positions (e.g. 72 cell modules) can be mounted with this item. This was not possible before with the CS+ solution. Due to that the classical (iconic) system Renusol CS+ can be used in even more cases. Please note this product includes 4 x clips   Supplier Part No: 420023 Weight: 0.15 kg      

Read more less

Part No: ESD-1006580 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty    Supplier Part No: 1006580 Weight: 0.017 kg  

Read more less

Part No: REN-520075-GROUND Mounting - Ground Mount This part is made up of the following items: 1 x REN-520075-K ConSole+ (incl. Mounting material and U-Profile)   The ConSole+ provides an angle of 15 degrees. The ConSole+ assembly system is the ideal solution for installing PV modules on the ground, especially ground that is unstable, for example landfill areas. Most commercially available framed standard PV modules fit the ConSole+. The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.   Weight: 8 kg Length: 1.71 m

Read more less