Solar Fitting & Mounting Kits

Part No: REN-420150 Mounting - Roof Anchor- Tile & Slates Technical Data Applicational Data Material Dimensions Weight Compatible Components Space for adjustment vertical: 37,5 mm Roof hook is pre-assembled Frictional connection due to serration Stainless steel 155 x 180 x 170 mm 0,560 kg 400081, 400011, 400094, 430009, 490018, 900012, 900138, 900145, 900163 1 x Roof hook stainless steel 1 x Hammerhead bolt M8 x 25 1 x Hexagon Nut w. serration DIN6923 - M8 A2-70 Keywords: Roof Anchor- Tile & Slate, Roof Anchor- Tile & Slate, Roof Anchor- Tile & Slate, Roof Anchor- Tile & Slate, Roof Anchor- Tile & Slate, Roof Anchor- Tile & Slate, REN420150, Renusol, PV Mounting, Roof Anchor- Tile & Slate   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:420150 Weight:0.61 kg

Read more less

Part No: SLT-110012-300 Mounting - Roof Anchor- Hanger Bolts Hanger bolts   Roof cladding: Corrugated roofs & trapezoidal sheet   For corrugated sheets (such as those of fibre cement) or trapezoidal sheet roofs, corrugated roof fastening sets consisting of a special hanger bolt with EPDM seal and a mounting plate are used. Please note that illustrations and thread lengths may vary! Hanger bolt set 12 x 300 pre-assembled with vulcanized EPDM seal (UV resistant) and 3 flange nuts in V4A.   Supplier Part No:110012-300 Weight:0.252 kg PV Light:SLT1

Read more less

Part No: SLT-111112-300-KT Mounting - Roof Anchor- Hanger Bolts This part is made up of the following items: 1 x SLT-110012-300 Hanger bolt kit 12x300 assembled   1 x SLT-119001-020 KlickTopPro attachment for hanger bolt   Corrugated roof fastening kit KlickTop, including KlickTop kit, Hanger bolt with valcanized EPDM-sealing (UV resistant) and 3 flange nuts in V4A quality   Weight:0.362 kg PV Light:SLT1

Read more less

Part No: SLT-163900-011 Mounting - FixGrid FixGrid FixZ-7 upper system rail 96mm with connector fixgrid   Supplier Part No:163900-011 Weight:0.16 kg

Read more less

Part No: GSE-GM-S-CLAMP-B-35 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for its implementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!    Supplier Part No:ART100064 Weight:0.086 kg

Read more less

Part No: SSP-ERIC-TILE-L Mounting - Roof Anchor- Tile & Slates ERIC-TILE plain tile roof hook allows for simple solar panel installations on plain/rosemary tiled roofs. No cutting, no sealants and no leaks. Helps prevent tile breakages whilst allowing installers to stand on the mounting rail.   Supplier Part No:SSP-ERIC-TILE-L Weight:1 kg

Read more less

Part No: REN-500404 Mounting - Flat Roof Bottom rail connector 150 mm   fs10 fs18   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:500404 Weight:0.07 kg

Read more less

Part No: REN-900184 Mounting - Roof Anchor- Hanger Bolts Technical Data Applicational Data Material Dimensions Weight Compatible Thread length: 150/50 Hexagon socket 5 mm with building approval Z-14.4 - 555 Setscrew: M10 Clamping range: 80 - 130 mm pre-drilling necessary Stainless steel 8,4 x 206 mm 0,093 kg 420012, 420014, 420130, 420131, 900193, 900205 - 900222 REN900184, Renusol, PV Mounting, Roof Anchor- Hanger Bolt Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:900184 Weight:0.1 kg

Read more less

Part No: GSE-FRAME-DPO-1840-1050 Mounting - In Roof GSE module mounting plate for one portrait PV module    Please note; These frames are ordered in halves. 2 frames are required per module - this product is simply showing the upper or lower half of a single frame. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!  Notice: The DPO frames are not currently supported in the Segen design tool. To generate a design please use GSE's own configurator attached in the documents tab of this product page.   Supplier Part No:ART105365 Weight:3 kg

Read more less

Part No: GSE-GM-S-CLAMP-B-30 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!    Supplier Part No:ART104665 Weight:0.085 kg

Read more less

Part No: SLT-943755-925 Mounting - Fixings Drill Screw 5.5mm x 25mm2 with Gasket. Solo slide in connector SLT-129060-000 (2 pieces) needs 4 x SLT-943755-925 And Connector plate Eco05 Internal Connector SLT-129001-014 (1 piece) requires 2 x SLT-943755-925   Weight:0.01 kg

Read more less

Part No: GSE-FRAMEHC-POR-1710-1045 Mounting - In Roof GSE module mounting plate for one portrait PV module including Half Cell with length 1630-1750mm and width 1040-1045mm.  MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!    Please note this frame can support modules up to 1780 x 1045mm as an exemption from standard rule and only providing the installer increases the gap between frames as per this document Supplier Part No:ART104728 Weight:5 kg Length:1.75 m

Read more less

Part No: ESD-1007212 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No:1007212 Weight:3 kg

Read more less

Part No: KE8073-0100 Mounting - Cable Flashings Klober’s Solar Cable Outlet Kit The flashing kit creates a watertight seal around cables which pass through the roof. Use in conjunction with Klober’s Sealing Collar to create a wind- and airtight seal around the penetration. Product features & benefits -Provides watertight lead-through for cables which pass through the roof -8 Cable Insert allows additional cables to be added -Foam strip and sealing bar provide perfect barrier against driving rain -Fully wind-tunnel tested -Available in 3 colours to match the roof -Slate Cable Kit also available -Sealing Collar creates airtight seal around cables passing through the roof.   Supplier Part No:KE8073-0100 Weight:1.5 kg

Read more less

Part No: SLT-169019-170 Mounting - FixGrid Fix Grid 18 FixZ-15 Windsafe18 to 1700mm for 60 cell modules   fixgrid   Supplier Part No:169019-170 Weight:1.5 kg

Read more less

Part No: DNLS200MPG Mounting - Cable Flashings Don't risk roof leaks and system failure through cable damage by pushing unprotected cables under the tiles or slates. The MCS Installation Guide for PV requires that "cable penetrations through the roof should not affect the weather tightness of the roof and should be durably sealed. The use of a purpose made product is a durable means to achieve this". [p.75] The Dektite Multicable is a simple, effective and universal way to ensure this requirement is met. At the same time it protects the cables from compression or damage from contact with roofing materials. Features & Benefits: DEKS Solardek Grey Silicone Solar Flashing For Tile & Slate Roof Durable, purpose-built flashing for solar thermal installations Grey silicone cone Can withstand roofline temperatures of up to 200°C constant and 250°C intermittent Suitable for roof pitches up to 45° 490 x 410mm base size 2 x 0-35mm pipe (external) Safe-protected Nu-Lead apron   Supplier Part No:DNLS200MPG Weight:2.68 kg

Read more less

Part No: ESD-1007655 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features Black profile for connecting rows of solar modules in case of a south faced layout. EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No:1007655 Weight:0.328 kg

Read more less

Part No: ESD-1007503 Mounting - Flat Roof Complete modular system and aerodynamic design Single or dual-tilt (east-west) configuration Unique thermal break prevents damage to the roofing material For most modern solar modules (tilt angle 13 degrees) Easy to install around obstacles Meets all international safety requirements   Supplier Part No:1007503 Weight:0.001 kg

Read more less

Part No: GSE-GM-S-CLAMP-B-40 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!    Supplier Part No:ART100007 Items in this pack:10 Weight:0.089 kg

Read more less

Part No: REN-410557 Mounting - Flat Roof This part is made up of the following items: 1 x REN-420550 TriSole+ V-frame Assembled   4 x REN-420083 Renusol Cross rail connector   1 x REN-400557 TriSole+ Vertical Support 35 degrees   TriSole + Triangle 35° assembled   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Weight:2 kg

Read more less

Part No: VIR-F16-T-LR-G1 Mounting - In Roof Viridian Clearline Fusion G1 portrait roofing kit Left, Right. Used for roof integrated PV module mounting systems.   Supplier Part No:F16-T-LR-G1 Weight:16 kg Length:1.8 m

Read more less

Part No: VIR-F16-LJ-G1 Mounting - In Roof Viridian Clearline Fusion corner conversion kit, left top corner. Used for roof integrated PV module mounting systems.   Supplier Part No:F16-LJ-G1 Weight:2.1 kg Length:1.8 m

Read more less

Part No: VIR-F16-TY-M10 Mounting - In Roof Clearline Fusion Aesthetics: Roof integrated panels sit lower to the roofline, without brackets and racking on show, to look like an intended part of the roof Roof maintenance: The roof covering can be easily maintained or replaced without the cost of dismantling a solar installation. Problems associated with bird infestation are avoided. Industry-leading panel spacing: The gap between rows is only 5mm. Columns are spaced by 30mm Simple: Fusion achieves exceptional fire performance, wind resistance and weather tightness without extra roof battens, adhesive flashing rolls or fire proofing materials. Everything you need is right there in the kit. Robust: Certified wind resistance is more than four times higher than competitor products. Universal: Works with all commonly used tiles and slates, including slate over sarking.   Supplier Part No:F16-TY-M10 Weight:2.2 kg  

Read more less

Part No: GSE-FRAME-DPO-1650-1160 Mounting - In Roof GSE In-Roof System™ enables modules installation on every type of roof covering (curved tiles, interlocking, flat tiles, slates, metal, zinc, trapezoidal), as well as on new buildings like retrofit buildings. GSE module mounting plate for one portrait PV module including Half Cell with height 1610-1800 and width 1155-1160 2022 version requires two Frames per-one Panel.   Easy and quick to install. Pre-Drilled fixing points Simple Interlocking of the plates from right to left. Installation in portrait and landscape format Ensures a perfect and durable water tightness. Non-flame propagator Compatible with 95% of the framed modules on the market Optimized ventilation along with cable passage via junction boxes for micro-inverters, maximize PV station production Certified and guaranteed for 15 years can be mounted on slopes between 12° and 50°. 150mm of height adjustment possible.   MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!  Notice: To generate a design please use GSE's own configurator attached in the documents tab of this product page.   Supplier Part No:ART105176 Weight:3 kg

Read more less

Part No: GSE-GM-RAIL-2.4 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No:ART104707 Weight:2.67 kg Length:0 m

Read more less

Part No: SLT-131101-902 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No:131101-902 Weight:0.055 kg Clip Type:199 Clip H:50 mm Clip B1:10 mm Clip Colour:Black

Read more less

Part No: REN-920005 Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x REN-420155 VarioSole Stainless Steel roof hook for slate tiles No Wood Screws   2 x REN-900013 Wood screw slated tiles countersunk 6 x 80   Technical Data Applicational Data Material Dimensions Weight Compatible Components Space for adjustment vertical: 24,5 mm Max. load: pressure 490 N, tension 490 N, shear 280 N Roof hook is pre-assembled Frictional connection due to serration Stainless steel 250 x 30 x 138 mm 0,510 kg 400081, 400011, 400094, 430009, 490018, 900138, 900163 1 x Roof hook for slate tiles 1 x Hammerhead bolt M8 x 25 1 x Hexagon Nut w. serration DIN6923 - M8 A2-70 2 x Wood screw slated tiles countersunk 6 x 80   Weight:0.5 kg

Read more less

Part No: REN-500455 Mounting - Flat Roof This streamliner version is for 18deg mounting angle and supports modules of up to 1700mm in length. fs10 fs18   Supplier Part No:500455 Weight:6.56 kg Length:1.8 m

Read more less

Part No: SLT-119033-001 Mounting - Roof Anchor- Hanger Bolts Hanger bolt KlickTop extension part for hanger bolt For M10 / M12 hanger bolts, loose, aluminium   Supplier Part No:119033-001 Weight:0.1 kg PV Light:R2+

Read more less

Part No: REN-400556 Mounting - Flat Roof TS+ Support 30° This is the short vertical length of a Renusol TriSole+ frame. The two long lengths are ordered as REN-420550.    Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400556 Weight: 0.27 kg

Read more less

Part No: REN-410556 Mounting - Flat Roof This part is made up of the following items: 1 x REN-420550 TriSole+ V-frame Assembled   4 x REN-420083 Renusol Cross rail connector   1 x REN-400556 TriSole+ Vertical Support 30 degrees   TriSole + Triangle 30° assembled   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Weight:1.98 kg

Read more less

Part No: SLT-128039-214 Mounting - Flat Roof Base Rail for Fix Grid and Flat Grid 4200mm.  FixGrid fixgrid   Supplier Part No:128039-214 Weight:3.5 kg Length:4.2 m

Read more less

Part No: VIR-F16-LJ-M10 Mounting - In Roof Clearline Fusion Aesthetics: Roof integrated panels sit lower to the roofline, without brackets and racking on show, to look like an intended part of the roof Roof maintenance: The roof covering can be easily maintained or replaced without the cost of dismantling a solar installation. Problems associated with bird infestation are avoided. Industry-leading panel spacing: The gap between rows is only 5mm. Columns are spaced by 30mm Simple: Fusion achieves exceptional fire performance, wind resistance and weather tightness without extra roof battens, adhesive flashing rolls or fire proofing materials. Everything you need is right there in the kit. Robust: Certified wind resistance is more than four times higher than competitor products. Universal: Works with all commonly used tiles and slates, including slate over sarking.   Supplier Part No:F16-LJ-M10 Weight:2.1 kg

Read more less

Part No: REN-860017 Mounting - Roof Anchor- Hanger Bolts Hanger bolt, M12, with bracket. Bolt length 300mm Adjustment reach 141mm   Supplier Part No:860017 Weight:0.37 kg

Read more less

Part No: VIR-F16-TR-G1 Mounting - In Roof Viridian Clearline Fusion G1 portrait roofing kit, Right. Used for roof integrated PV module mounting systems. VIR-F16-T-LR-G1 is an alternative kit which includes all the parts for both flashing kits (right and left together)   Supplier Part No:F16-TR-G1 Weight:8 kg Length:1.8 m

Read more less

Part No: FFLASH-5370B Mounting - Roof Flashings Fast Flash is a self adhesive lead replacement material that has many uses beyond replacement for traditional lead. Fast Flash can be used to flash large round or square penetrations that a Dektite cannot cover - with its self adhesive backing you'll have a water tight penetration in minutes!  This part can be used on GSE In-Roof or Easy Roof In Roof systems as a sealing strip replacement. It can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper metal flashing components.   Supplier Part No:FFR5-370B Weight:5.9 kg

Read more less

Part No: VIR-F16-TY-G1 Mounting - In Roof Viridian Clearline Fusion G1 portrait roofing kit, Row. Used for roof integrated PV module mounting systems.   Supplier Part No:F16-TY-G1 Weight:2.1 kg Length:1.8 m

Read more less

Part No: VIR-F16-TC-M10 Mounting - In Roof Clearline Fusion Aesthetics: Roof integrated panels sit lower to the roofline, without brackets and racking on show, to look like an intended part of the roof Roof maintenance: The roof covering can be easily maintained or replaced without the cost of dismantling a solar installation. Problems associated with bird infestation are avoided. Industry-leading panel spacing: The gap between rows is only 5mm. Columns are spaced by 30mm Simple: Fusion achieves exceptional fire performance, wind resistance and weather tightness without extra roof battens, adhesive flashing rolls or fire proofing materials. Everything you need is right there in the kit. Robust: Certified wind resistance is more than four times higher than competitor products. Universal: Works with all commonly used tiles and slates, including slate over sarking.   Supplier Part No:F16-TC-M10 Weight:7 kg

Read more less

Part No: GEN-SLATE-HOOKS Mounting - Roof Flashings The Hallhook™ from Genius Roof Solutions is a permanent, secret and fail safe device that should be used when replacing a broken slate. The Hallhook was invented by a slater and tiler with 45 years of trade under his belt who couldn't stand to see a slate tiled roof covered with unsightly lead or copper straps. He tried all other available slate repairs such as straps, blobs of silicone, plastic proucts that are not only unsightly but time-consuming to install, etc. and then went on to develop the Hallhook.  When to use the Hallhook™  For general repair After solar panel bracket mounting After roof light/window installation After installing slate vents This is a pack of 10 pcs.   Supplier Part No:HHK001 Items in this pack:10 Weight:0.14 kg  

Read more less

Part No: REN-420022 Mounting - Flat Roof Trays Details: ConSole 4.1, 4.2, 5.2, 6.2 and CS+ Compatible with: 520041-K, 520042-K, 520052-K, 520062-K, 520075-K Technical Data: Material: Aluminium and stainless steel Other Contents: 1 x 900115 Hexag. screw DIN7504-ST5,5x25-A2-SW8 4 x 900027 Hexag. screw DIN933-M6x20 A2-70 4 x 900028 Washer DIN9021-6,4-A2 4 x 900029 Self-locking hexag. nut DIN985-M6-A2 4 x 900106 ConSole Clip   Supplier Part No:420022 Weight:0.11 kg Length:1 m  

Read more less

Part No: ESD-1008014 Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No:1008014 Weight:0.4 kg

Read more less

Part No: UBIFLEX-HIGH-TACK-SEALANT Mounting - Roof Flashings Ubiflex High Tack sealant for sealing Ubiflex down to tiles, slates and overlap joints.   Ubbink Part no; 534066   Supplier Part No:534066 Weight:0.53 kg

Read more less

Part No: VIR-F16-TL-G1 Mounting - In Roof Viridian Clearline Fusion G1 portrait roofing kit, Left. Used for roof integrated PV module mounting systems. VIR-F16-T-LR-G1 is an alternative kit which includes all the parts for both flashing kits (right and left togeher)   Supplier Part No:F16-TL-G1 Weight:8 kg Length:1.8 m

Read more less

Part No: ESD-1004935 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No:1004935 Weight:0.027 kg

Read more less

Part No: GSE-GM-NUT-CORNER-PIECE-T Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!   Supplier Part No:ART101184 Items in this pack:100 Weight:0.001 kg

Read more less

Part No: REN-500421 Mounting - Flat Roof Ridge support 10° fs10   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:500421 Weight:0.32 kg

Read more less

Part No: REN-420131 Mounting - Roof Anchor- Hanger Bolts Technical Data: Material: Aluminium EN-AW-6063 T6     Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:420131 Weight:0.12 kg

Read more less

Part No: VIR-F16-LY-G1 Mounting - In Roof Viridian Clearline Fusion G1 landscape roofing kit, Row. Used for roof integrated PV module mounting systems.   Supplier Part No:F16-LY-G1 Weight:2.1 kg Length:1.8 m

Read more less