Log in For Existing Trade Customers

Sunamp Thermino 300 ePV

Description

 

Thermino ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.

The Thermino 300 ePV would typically be installed in a 4-5 bedroom property.

Note, the Sunamp is very heavy:

  • Tilting it beyond 45 degrees may damage the unit and void your warranty.

 

Power Inputs: 

Grid electricity - Secondary source
Boiler

Solar Panels - Primary Source
Heat Pump

 

General Specifications

Product Code DRP-BAW-ATY-1
Equivalent energy storage 14.0kWh
Equivalent hot water capacity 306L
Water available at 40°C 436L
Weight in use 233kg
Height 1050mm
Width 365mm
Depth 575mm
Storage core warranty 10 Years
Other parts warranty 2 Years

Technical Specifications

Standing heat loss 35W
Energy efficiency rating C
Recommended flow rate 25LPM
Minimum supply pressure 1.5 bar
Maximum supply pressure 10 bar
Annual electricity consumption 2,701kWh/annum

Product form

  Thermino ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used... Read more

Low Stock Levels

Login to see prices

  • Quality
  • Reliabilty
  • Trusted

Description

 

Thermino ePV - Designed to produce domestic hot water by using grid electricity and surplus PV energy. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.

The Thermino 300 ePV would typically be installed in a 4-5 bedroom property.

Note, the Sunamp is very heavy:

  • Tilting it beyond 45 degrees may damage the unit and void your warranty.

 

Power Inputs: 

Grid electricity - Secondary source
Boiler

Solar Panels - Primary Source
Heat Pump

 

General Specifications

Product Code DRP-BAW-ATY-1
Equivalent energy storage 14.0kWh
Equivalent hot water capacity 306L
Water available at 40°C 436L
Weight in use 233kg
Height 1050mm
Width 365mm
Depth 575mm
Storage core warranty 10 Years
Other parts warranty 2 Years

Technical Specifications

Standing heat loss 35W
Energy efficiency rating C
Recommended flow rate 25LPM
Minimum supply pressure 1.5 bar
Maximum supply pressure 10 bar
Annual electricity consumption 2,701kWh/annum

Forgot Password

Welcome to PowerlandB2B

Back to top

alert("he");