Products

Part No: FFLASH-5370B Mounting - Roof Flashings Fast Flash is a self adhesive lead replacement material that has many uses beyond replacement for traditional lead. Fast Flash can be used to flash large round or square penetrations that a Dektite cannot cover - with its self adhesive backing you'll have a water tight penetration in minutes!  This part can be used on GSE In-Roof or Easy Roof In Roof systems as a sealing strip replacement. It can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper metal flashing components.   Supplier Part No:FFR5-370B Weight:5.9 kg

Read more less

Part No: DFE101BM Mounting - In Roof Ideal for weatherproofing cable entry on commercial PV installations. Avoid unwanted long cable runs on roof and down side of building. Dektite allows cables to be taken safely through any trapezoidal or corrugated roof wherever requred. Ensure that MCS weatherpoofing requirements are met by using purpose made products and at the same time protect cables from damage by isolating them from contact with roof materials. Each flashing takes up to 12 cables The Dektite Premium is an easy to install, effective and low cost solution backed by a 20 year warranty and Deks Industries' 50 years experience in design and manufacture of polymer roof flashings. Fix with Dektite Fixing Kit DFK1 which contains sufficient sealant and fixings for two or three flashings, depending on type of roof sheet. Dektite Premium DFE101BM * Purpose made weatherproofing as required by MCS * Avoids unwanted long cable runs on roof * Protects cables from damage - up to 12 through each flashing * Tough UV resistant EPDM * Fits any trapezoidal or corrugated profile * Easy to fit using Dektite Fixing Kit DFK1 * 20 year Dektite warranty   Supplier Part No:DFE101BM Weight:0.09 kg

Read more less

Part No: SDA10MB Mounting - Cable Flashings Don't risk roof leaks and cable damage by pushing unprotected cables under the tiles or slates. The MCS INstallation Guide for PV requires that cable penetrations through the roof should not affect the weather tightness of the roof and should be durably sealed. The Dektite Multicable is a simple, effective and universal way to ensure this requirement is met. At the same time it protects cables from damage through contact with other roof materials. The economical soft temper aluminium base  is ideal for slate or plain tile roof. Base 450 x 600mm. Dektite Multicable - Alminium base - SDA10MB * Durable purpose made weatherproofing product as per MCS * Fits all types of tile or slate roof * Quick and easy to install - only tool needed cable snips * Protects up to 10 cables from damage * Low cost  Aluminium base - ideal for plain tile or slate roof * 20 year warranty   Supplier Part No:SDA10MB Weight:0.95 kg

Read more less

Part No: DNLS200MPG Mounting - Cable Flashings Don't risk roof leaks and system failure through cable damage by pushing unprotected cables under the tiles or slates. The MCS Installation Guide for PV requires that "cable penetrations through the roof should not affect the weather tightness of the roof and should be durably sealed. The use of a purpose made product is a durable means to achieve this". [p.75] The Dektite Multicable is a simple, effective and universal way to ensure this requirement is met. At the same time it protects the cables from compression or damage from contact with roofing materials. Features & Benefits: DEKS Solardek Grey Silicone Solar Flashing For Tile & Slate Roof Durable, purpose-built flashing for solar thermal installations Grey silicone cone Can withstand roofline temperatures of up to 200°C constant and 250°C intermittent Suitable for roof pitches up to 45° 490 x 410mm base size 2 x 0-35mm pipe (external) Safe-protected Nu-Lead apron   Supplier Part No:DNLS200MPG Weight:2.68 kg

Read more less

Part No: DNLS10MB Mounting - Cable Flashings Don't risk roof leaks and system failure through cable damage by pushing unprotected cables under the tiles or slates. The MCS Installation Guide for PV requires that "cable penetrations through the roof should not affect the weather tightness of the roof and should be durably sealed. The use of a purpose made product is a durable means to achieve this". [p.75] The Dektite Multicable is a simple, effective and universal way to ensure this requirement is met. At the same time it protects the cables from compression or damage from contact with roofing materials. Dektite Multicable DNLS10MB  * Purpose made product as per MCS  * Universal - fits all types of tile and slate roofs  * Quick and easy to instal - only tool needed cable snips  * Nu-Lead base [acrylic coated lead] for perfect dressing with profiled tiles. Safe handling, no staining.  * Base size 490 x 410mm, easily cut down if necessary  * Dektite quality EPDM seal protects up to 10 cables from compression or damage by isolation from contact with roofing materials  * Durable product backed by 20 year warranty and Deks 50 years experience in design and manufacture of roof flashings.   Supplier Part No:DNLS10MB Weight:2.69 kg

Read more less

Part No: GSE-GM-D-CLAMP-B Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! 

Read more less

Part No: EZI-PED-DBL EV Charging - Mounting Easee Base is a robust and weatherproof post that gives you more freedom to install the Charging Robot where it suits you best. It has four configurations that support single, dual, triple and quad charger setups, getting the maximum out of the installation. Thanks to its Power Rail connection box, it connects different posts in series, while converging all Charging Robots terminations in the same rail. Up to four Easee Charging Robots can be installed on the same post. Easy to connect each post in series with the supplied Power Rail connection box. Made of aluminium, with a strong scratch resistant powder coating, ensuring a long lasting durability. Integrated cable hooks that allow the charging cable to be permanently connected Adapter plate that allows for a 45 degree installation angle. The charging cable can be permanently locked in the Charging Robot. Dimension (mm): 1-way / 2-way: H: 1500 x W: 156 x D: 80 Weight: 6.1–7.7 kg Degree of protection: IP44 This part includes - an Adapter plate, Power rail with Ground connection plate, Side panel, Column, Mounting plates and 1-way blind cover. Screws, washers and nuts also included. Please refer to the installation manual for full guidance and wiring of power rail. Easee hardware is covered by our 3 years limited warranty. Designed in Norway This product does not include the Easee EV charger. Supplier Part No: 90323 Weight: 6.1 kg

Read more less

Part No: EZI-CVR-ANTH EV Charging - Cover A colourful choice for your EV Charger. The choice is yours. We have covers in five different colours; White, Anthracite, Red, Blue and Black. Easily connect the front cover to the Chargeberry and to the backplate. Quick, safe and simple. See page 17 of Installation Manual. Before closing the front cover, it is possible but optional to lock the Chargeberry with a padlock (see recommended padlock size on page 21 of Installation Manual). Locking the electronics adds an extra level of security (padlock is not included). This product only includes a cover.   Weight: 0.22 kg

Read more less

Part No: SDM120DB Meters - Single Phase Generation Meters SDM120D meters have been produced to offer a low-cost solution to metering low Amp circuits. The SDM120D range work directly connected to a maximum load 45A AC circuit. This SDM120DB version comes with a backlight making it easier to take readings  Active Energy Measured Pulse Output 45A Max. Direct Load 1 Module Wide 35mm Din Rail Mounting Measurements: H - 119mm W - 17.5mm D - 62mm   Supplier Part No:SDM120DB Weight:0.081 kg

Read more less

Part No: REN-500420 Mounting - Flat Roof Eave support for use with FS10 S, FS18 S and FS10 EW systems.  fs10 fs18 Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 500420 Weight: 0.06 kg

Read more less

Part No: REN-520502 Mounting - Flat Roof Eco Ballast Set FS 2100mm Size 2100x50x40 The ballast trays REN-520501 can be optionally added to your design to accommodate a higher amount of ballast, should your particular site need it.    Note: the design tool will not calculate the required ballast weight. Renusol can provide a detailed wind loading report that shows the amount of ballast that is required per module. Please provide them with the installation and site details at: tsuk@renusol.com  Each SET Composed of: 2x 500529 Eco Ballast Rail 2100mm (size 2100x40x40) 2x 900074  Stainless Steel Cable ties 2x 900229 Self Drilling Screw 4.8x19 A2 2x 500413 Roof Protection pad 500x40x11mm for ballast set (size 500x400x11)   Supplier Part No: 520502 Weight: 2.5 kg Length: 2.1 m

Read more less

Part No: MYEN-ZAPPI-2H22TB EV Charging - Incomplete Charger This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Please see for complete EV charger: MYEN-ZAPPI-2H22TB-PACK 22kW Eco-smart untethered EV Charger in Black Charge your EV with your PV! Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com Important This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Supplier Part No: ZAPPI-2H22TB Weight: 5.5 kg

Read more less

Part No: MYEN-ZAPPI-2H22TB-PACK EV Charging - EV Charger This part is a special offer made up of the following items: Part   1 x MYEN-ZAPPI-2H22TB Eco-smart EV Charge Point 22kW 3PH Type 2 Tethered Black   1 x MYEN-TAMPERKIT-2.1 myenergi Retrofit Tamper Kit   22kW Eco-Smart Untethered EV Charger In Black With Tamper Kit Charge your EV with your PV! MYEN-TAMPERKIT-2.1 - Included to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations (included in this package) Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com   Weight: 5.52 kg

Read more less

Part No: MYEN-ZAPPI-2H22TW EV Charging - Incomplete Charger This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Please see for complete EV charger: MYEN-ZAPPI-2H22TW-PACK 22kW Eco-smart untethered EV Charger in Black Charge your EV with your PV! Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com Important This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Supplier Part No: ZAPPI-2H22TW Weight: 5.5 kg

Read more less

Part No: MYEN-ZAPPI-2H22TW-PACK EV Charging - EV Charger This part is a special offer made up of the following items: Part   1 x MYEN-ZAPPI-2H22TW Eco-smart EV Charge Point 22kW 3PH Type 2 Tethered White   1 x MYEN-TAMPERKIT-2.1 myenergi Retrofit Tamper Kit   22kW Eco-Smart Untethered EV Charger In Black With Tamper Kit Charge your EV with your PV! MYEN-TAMPERKIT-2.1 - Included to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations (included in this package) Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com   Weight: 5.52 kg

Read more less

Part No: MYEN-ZAPPI-2H22UB EV Charging - Incomplete Charger This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Please see for complete EV charger: MYEN-ZAPPI-2H22UB-PACK 22kW Eco-smart untethered EV Charger in Black Charge your EV with your PV! Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com Important This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Supplier Part No: ZAPPI-2H22UB Weight: 5.5 kg

Read more less

Part No: MYEN-ZAPPI-2H22UB-PACK EV Charging - EV Charger This part is a special offer made up of the following items: Part   1 x MYEN-ZAPPI-2H22UB Eco-smart EV Charge Point 22kW 3PH Untethered Black   1 x MYEN-TAMPERKIT-2.1 myenergi Retrofit Tamper Kit   22kW Eco-Smart Untethered EV Charger In Black With Tamper Kit Charge your EV with your PV! MYEN-TAMPERKIT-2.1 - Included to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations (included in this package) Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com   Weight: 5.52 kg

Read more less

Part No: MYEN-ZAPPI-2H22UW EV Charging - Incomplete Charger This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Please see for complete EV charger: MYEN-ZAPPI-2H22UW-PACK 22kW Eco-smart untethered EV Charger in Black Charge your EV with your PV! Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com Important This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Supplier Part No: ZAPPI-2H22UW Weight: 5.5 kg

Read more less

Part No: MYEN-ZAPPI-2H22UW-PACK EV Charging - EV Charger This part is a special offer made up of the following items: Part   1 x MYEN-ZAPPI-2H22UW Eco-smart EV Charge Point 22kW 3PH Untethered White   1 x MYEN-TAMPERKIT-2.1 myenergi Retrofit Tamper Kit   22kW Eco-Smart Untethered EV Charger In Black With Tamper Kit Charge your EV with your PV! MYEN-TAMPERKIT-2.1 - Included to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations (included in this package) Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com   Weight: 5.52 kg

Read more less

Part No: MYEN-ZAPPI-2H07TB EV Charging - EV Charger 7kW Type 2 Tethered EV Charger in Black Charge your EV with your PV! Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty   Supplier Part No: ZAPPI-2H07TB Weight: 6.5 kg Data Sheet Zappi H Series

Read more less

Part No: MYEN-ZAPPI-2H07TW   EV Charging - EV Charger 7kW Type 2 Tethered EV Charger in White Charge your EV with your PV! Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Supplier Part No: ZAPPI-2H07TW Weight: 4.5 kg Data Sheet Zappi H Series

Read more less

Part No: MYEN-ZAPPI-2H07UB EV Charging - Incomplete Charger This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Please see for complete EV charger: MYEN-ZAPPI-2H07UB-PACK 7kW untethered EV Charger in Black Charge your EV with your PV! Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com       Important This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations. Supplier Part No: ZAPPI-2H07UB Weight: 4.5 kg

Read more less

Part No: MYEN-ZAPPI-2H07UW EV Charging - Incomplete Charger This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Please see for complete EV charger: MYEN-ZAPPI-2H07UW-PACK 7kW untethered EV Charger in White Charge your EV with your PV! Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com Important This is an incomplete EV Charger and requires MYEN-TAMPERKIT-2.1 to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations Supplier Part No: ZAPPI-2H07UW Weight: 4.5 kg

Read more less

Part No: MYEN-ZAPPI-2H07TB-PACK EV Charging - EV Charger This part is a special offer made up of the following items: Part   1 x MYEN-ZAPPI-2H07TB Eco-smart Single Phase EV Charge Point 7kW Type 2 Tethered Black   1 x MYEN-TAMPERKIT-2.1 myenergi Retrofit Tamper Kit   7kW Type 2 Tethered EV Charger In White With Tamper Kit  Charge your EV with your PV! MYEN-TAMPERKIT-2.1 - Included to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations (included in this package) Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com   Weight: 6.52 kg

Read more less

Part No: MYEN-ZAPPI-2H07TW-PACK EV Charging - EV Charger This part is a special offer made up of the following items: Part   1 x MYEN-ZAPPI-2H07TW Eco-smart Single Phase EV Charge Point 7kW Type 2 Tethered White   1 x MYEN-TAMPERKIT-2.1 myenergi Retrofit Tamper Kit   7kW Type 2 Tethered EV Charger In White With Tamper Kit  Charge your EV with your PV! MYEN-TAMPERKIT-2.1 - Included to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations (included in this package) Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com   Weight: 4.52 kg

Read more less

Part No: MYEN-ZAPPI-2H07UB-PACK EV Charging - EV Charger This part is a special offer made up of the following items: Part   1 x MYEN-ZAPPI-2H07UB Eco-smart Single Phase EV Charge Point 7kW Untethered Black   1 x MYEN-TAMPERKIT-2.1 myenergi Retrofit Tamper Kit   7kW Untethered EV Charger In Black With Tamper Kit Charge your EV with your PV! MYEN-TAMPERKIT-2.1 - Included to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations (included in this package) Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com   Weight: 4.52 kg

Read more less

Part No: MYEN-ZAPPI-2H07UW-PACK EV Charging - EV Charger This part is a special offer made up of the following items: Part   1 x MYEN-ZAPPI-2H07UW Eco-smart Single Phase EV Charge Point 7kW Untethered White   1 x MYEN-TAMPERKIT-2.1 myenergi Retrofit Tamper Kit   7kW Untethered EV Charger In White With Tamper Kit Charge your EV with your PV! MYEN-TAMPERKIT-2.1 - Included to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations (included in this package) Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Click here to view Myenergi product training webinar Built in Wifi and ethernet socket, for connection to the internet (no Hub required) NOTICE: For any training requirements, please contact training@myenergi.com   Weight: 4.52 kg

Read more less

Part No: CABLE10-1-100 Cables - DC Cables 10 mm², single-core, black, 100m 100m solar cable with length label. Supplied on a reusable spool. Conductor cross-section: 10 mm² (this is not the cable diameter, but rather the cross-sectional area).  System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.    Supplier Part No:CABLE10-1-100 Weight:13.42 kg Length:100 m Area:10 mm2 Colour:Black Cores:1 - N Max Current:57 Max Voltage:1800

Read more less

Part No: CABLE10-1-500 Cables - DC Cables 10 mm², single-core, Black, 500 m Cross section: 10 mm² System voltage: 1800 V Rated current: 98 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. This Cable is Double Insulated. Colour: Black Keywords: CABLE101500, Eland, PV Cable, DC Cable   Supplier Part No:E6S10500BL500 Weight:65 kg Length:500 m Area:10 mm2 Colour:Black Cores:1 - N Max Current:57 Max Voltage:1800

Read more less

Part No: CABLE4-1-100-R Cables - DC Cables 4 mm², single-core, RED, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE4-1-100-R Weight:6 kg Length:100 m Area:4 mm2 Colour:Red Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-500-R Cables - DC Cables APPLICATION -Updated harmonized (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/ A1, and is tested for durability according to EN 60216.   Supplier Part No:CABLE4-1-500-R Weight:30 kg Length:500 m Area:4 mm2 Colour:Red Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-50-R Cables - DC Cables   Supplier Part No:CABLE4-1-50-R Weight:2.86 kg Length:50 m Area:4 mm2 Colour:Red Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-1000 Cables - DC Cables 4 mm², single-core, black, 1000m 1000m solar cable with length label. Supplied on a reusable spool. Conductor cross-section: 4 mm² (this is not the cable diameter, but rather the cross-sectional area).  System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.    Supplier Part No:SOLAR1X4BK Weight:60 kg Length:1,000 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-100 Cables - DC Cables 4 mm², single-core, black, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.     Supplier Part No:CABLE4-1-100 Weight:5 kg Length:100 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-100-Brown Cables - DC Cables 4 mm², single-core, Brown, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Red cables are also avaialble,   Supplier Part No:CABLE4-1-100-Brown Weight:5.74 kg Length:100 m Area:4 mm2 Colour:Brown Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-100-Grey Cables - DC Cables 4 mm², single-core, Grey, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Red cables are also available.    Supplier Part No:CABLE4-1-100-Grey Weight:5.755 kg Length:100 m Area:4 mm2 Colour:Grey Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-250 Cables - DC Cables 4 mm², single-core, black, 250m NEW H1Z2Z2-K certified 250m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE4-1-250 Weight:14.81 kg Length:250 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-25 Cables - DC Cables 4 mm², single-core, black, 25m NEW H1Z2Z2-K certified 25m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE4-1-25 Weight:1.365 kg Length:25 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-500 Cables - DC Cables 4 mm², single-core, black, 500m NEW H1Z2Z2-K certified 500m solar cable with length label. Supplied on a reusable spool. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:26036 Weight:30 kg Length:500 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE4-1-50 Cables - DC Cables 4 mm², single-core, black, 50m NEW H1Z2Z2-K certified 50m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life.   Supplier Part No:CABLE4-1-50 Weight:2.675 kg Length:50 m Area:4 mm2 Colour:Black Cores:1 - N Max Current:32 Max Voltage:1800

Read more less

Part No: CABLE6-1-100-R Cables - DC Cables   Supplier Part No:E6S10060BK100 Weight:7.63 kg Length:100 m Area:6 mm2 Colour:Red Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE6-1-2 Cables - DC Cables APPLICATION -Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/ A1, and is tested for durability according to EN 60216.   Supplier Part No:CABLE6-1-2 Weight:0.14 kg Length:2 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE6-1-2-R Cables - DC Cables APPLICATION -Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/ A1, and is tested for durability according to EN 60216.   Supplier Part No:CABLE6-1-2-R Weight:0.14 kg Length:2 m Area:6 mm2 Colour:Red Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE6-1-500-R Cables - DC Cables APPLICATION -Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/ A1, and is tested for durability according to EN 60216.   Supplier Part No:CABLE6-1-500-R Weight:42 kg Length:500 m Area:6 mm2 Colour:Red Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE6-1-1000 Cables - DC Cables 6 mm², single-core, black, 1000m NEW H1Z2Z2-K certified 1000m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human    Supplier Part No:CABLE6-1-1000 Weight:74 kg Length:1,000 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE6-1-100 Cables - DC Cables 6 mm, single-core, black, 100m NEW H1Z2Z2-K certified 100m solar cable with length label. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to1.5kV between conductors as well as between conductor and earth, and not exceeding1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TiV approved PV1-F cable. H1Z2Z2-KPHOTOVOLTAIC CABLE CONSTRUCTION Conductor Flexible tinned copper (Class 5) Insulation Halogen-free cross-linked compound Outersheath Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TïV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE6-1-100 Weight:8.5 kg Length:100 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE6-1-250 Cables - DC Cables 6 mm², single-core, black, 250m NEW H1Z2Z2-K certified 250m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE6-1-250 Weight:19.8 kg Length:0.29 m Length:250 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less

Part No: CABLE6-1-25 Cables - DC Cables 6 mm², single-core, black, 25m NEW H1Z2Z2-K certified 25m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No:CABLE6-1-25 Weight:1.87 kg Length:25 m Area:6 mm2 Colour:Black Cores:1 - N Max Current:41 Max Voltage:1800

Read more less